Veröffentlichungen

2018

• A Review of Advanced Composite and Nanostructured Coatings by Solid-State Cold Spraying Process; Wenya Li, Hamid Assadi, Frank Gaertner and Shuo Yin; CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES, available online https://doi.org/10.1080/10408436.2017.1410778, to be printed in 2018

2017

• Warm Spraying of High-Strength Ni-Al-Bronze: Cavitation Characteristics and Property Prediction, Sebastian Krebs, Seiji Kuroda, Hiroshi Katanoda, Frank Gaertner, Thomas Klassen, Hiroshi Araki, Simon Frede, Journal of Thermal Spray Technology, January 2017, Volume 26, Issue 1, pp 265–277
• Influence of thermal properties and temperature of substrates on the quality of cold-sprayed deposits,  AM13502, Acta Materialia, Hamid Assadi, Z. Arabgol, M. Villa Vidaller, F. Gärtner, T. Klassen, 31-Jan-2017,  10.1016/j.actamat.2017.01.040

2016

• Cold Spraying – A Materials Perspective, H. Assadi, H. Kreye, F. Gärtner, T. Klassen, Received 1 April 2016, Revised 13 June 2016, Accepted 14 June 2016, Available online 27 June 2016
• The Thermal Spray Roadmap, Armelle Vardelle, Christian Moreau, Jun Akedo, Hossein Ashrafizadeh, Christopher C. Berndt, Jörg Oberste Berghaus, Maher Boulos, Jeffrey Brogan, Athanasios C. Bourtsalas, Ali Dolatabadi, Mitchell Dorfman, Timothy J. Eden, Pierre Fauchais, Gary Fisher, Frank Gaertner, Journal of Thermal Spray Technology, December 2016, Volume 25, Issue 8, pp 1376–1440

2015

• Effect of Fe additive on the hydrogenation-dehydrogenation properties of 2LiH + MgB₂/2LiBH₄ + MgH₂ system, J.A. Puszkiel , F.C. Gennari , P. Arneodo Larochette , J.M. Ramallo-López , U. Vainio , F. Karimi , P.K. Pranzas , H. Troiani , C. Pistidda , J. Jepsen , M. Tolkiehn , E. Welter , T. Klassen , J. Bellosta von Colbe , M. Dornheim : Received 27 January 2015, Revised 20 February 2015, Accepted 27 February 2015, Available online 28 February 2015
• Cold Spraying of Cu-Al-Bronze for Cavitation Protection in Marine Environments, S. Krebs, F. Gärtner, T. Klassen, Journal of Thermal Spray Technology, 24 (2015), p. 126-135
• Cold Spraying of Amorphous Cu50Zr50 Alloys, A. List, F. Gärtner, T. Mori, M. Schulze, H. Assadi, S. Kuroda, T. Klassen, Journal of Thermal Spray Technology, 24 (2015), p. 108-118
• Single Impact Bonding of Cold Sprayed Ti-6Al-4V Powders on Different Substrates, Maria Villa Vidaller, Alexander List, Frank Gaertner, Thomas Klassen, Sergi Dosta, and Jose Maria GuilemanyJournal of Thermal Spray Technology, 24 (2015), p. 644-658
• Structural and kinetic investigation of the hydride composite Ca(BH4)2+MgH2 system doped with NbF5 for solid-state hydrogen storage, Fahim Karimi, Philip Klaus Pranzas, Claudio Pistidda, Julián Puszkiel, Christian Bonatto Minella, Chiara Milanese, Thomas Emmler, Rapee Utke, Ulla Vainio, Martin Tolkiehn, Anna-Lisa Chaudhary, Antonio Santoru, Stefan Boeries, Craig Buckley, Stefano Enzo, Andreas Schreyer, Thomas Klassen, Martin Dornheim and Mark Paskevicius, Physical Chemistry Chemical Physics – CP-ART-06-2015-003557.R1, Phys. Chem. Chem. Phys., 2015, Accepted Manuscript, DOI:10.1039/C5CP03557K
• Determination of plastic constitutive properties of microparticles through single particle compression, H. Assadi, I. Irkhin, H. Gutzmann, F. Gärtner, M. Schulze, M. Villa Vidaller, T. Klassen, Advanced Powder Technology, 26 (2015), p. 1544-1554

2014

• 2LiBH₄–MgH₂–0.13TiCl₄ confined in nanoporous structure of carbon aerogel scaffold for reversible hydrogen storage, Rapee Gosalawit-Utke, Chiara Milanese, Payam Javadian, Alessandro Girella, Daniel Laipple, Julián Puszkiel, Alice S. Cattaneo, Chiara Ferrara, Jatuporn Wittayakhun, Jørgen Skibsted, Torben R. Jensen, Amedeo Marini, Thomas Klassen, Martin Dornheim: Journal of Alloys and Compounds, Volume 599, June 2014, Pages 78-86
• Hydrogen storage in Mg–LiBH₄ composites catalyzed by FeF_3, Julián Puszkiel, Fabiana C. Gennari, Pierre Arneodo Larochette, Horacio E. Troiani, Fahim Karimi, Claudio Pistidda, Rapee Gosalawit–Utke, Julian Jepsen, Torben R. Jensen, Carsten Gundlach, Martin Tolkiehn, José Bellosta von Colbe, Thomas Klassen, Martin Dornheim: Journal of Power Sources Volume 267, 1 December 2014, Pages 799–811
• Characterization of metal hydrides by in-situ XRD, Ulrike Bösenberg, Claudio Pistidda, Martin Tolkiehn, Nina Busch, Ivan Saldan, Karina Suarez-Alcantara, Anna Arendarska, Thomas Klassen, Martin Dornheim, International Journal of Hydrogen Energy, Volume 39, Issue 18, 15 June 2014, Pages 9899–9903
• Effect of NaH/MgB₂ ratio on the hydrogen absorption kinetics of the system NaH + MgB_{2 ,} Claudio Pistidda, Daphiny Pottmaier, Fahim Karimi, Sebastiano Garroni, Agnieszka Rzeszutek, Martin Tolkiehn, Maximilian Fichtner, Wiebke Lohstroh, Marcello Baricco, Thomas Klassen, Martin Dornheim, International Journal of Hydrogen Energy, Volume 39, Issue 10, 26 March 2014, Pages 5030–5036
• Destabilization of LiBH₄ by nanoconfinement in PMMA–co–BM polymer matrix for reversible hydrogen storage, Rapee Gosalawit-Utke, Sukanya Meethom, Claudio Pistidda, Chiara Milanese, Daniel Laipple, Thanit Saisopa, Amedeo Marini, Thomas Klassen, Martin Dornheim: International Journal of Hydrogen Energy Volume 39, Issue 10, 26 March 2014, Pages 5019–5029
• NaAlH₄ production from waste aluminum by reactive ball milling, Nils Bergemann, Claudio Pistidda, Chiara Milanese, Alessandro Girella, Bjarne R.S. Hansen, Johannes Wurr, José M. Bellosta von Colbe, Julian Jepsen, Torben R. Jensen, Amedeo Marini, Thomas Klassen, Martin Dornheim, International Journal of Hydrogen Energy, Available online 28 February 2014, In Press, Corrected Proof — Note to user
• Single impact bonding of cold sprayed Ti6Al4V powders onto different substrates, M.Villa Vidaller, S.Dosta, J.M.Guilemany, F.Gärtner, A.List, T.Klassen, Proc. ITSC 2014 Barcelona Spain, May 21 – 23, 2014, DVS-Berichte Volume 302, ISBN 978-3-87155-574-9, DVS Media GmbH, Düsseldorf, 2014, p. 929-934
• Modelling of impact and bonding of inhomogeneous particles in cold spraying, H. Assadi, T. Klassen, F. Gärtner, T. Nanbu, Y. Kawashita, Y. Uehara, Proc. ITSC 2014 Barcelona Spain, May 21 – 23, 2014, DVS-Berichte Volume 302, ISBN 978-3-87155-574-9, DVS Media GmbH, Düsseldorf, 2014, p. 203-207
• Disorder and bonding in cold spraying of Fe40Al, N. Cinca, F. Gärtner, T. Klassen, J. M. Guilemany, Proc. ITSC 2014 Barcelona Spain, May 21 – 23, 2014, DVS-Berichte Volume 302, ISBN 978-3-87155-574-9, DVS Media GmbH, Düsseldorf, 2014, p. 711-715
• Cold Spraying of Cu-Al-Bronze for Cavitation Protection in Marine Environments, S. Krebs, F. Gärtner, T. Klassen, Proc. ITSC 2014 Barcelona Spain, May 21 – 23, 2014, DVS-Berichte Volume 302, ISBN 978-3-87155-574-9, DVS Media GmbH, Düsseldorf, 2014, p. 59-64
• Hydrogen storage in MgeLiBH4 composites catalyzed by FeF3, Julian Puszkiel,, Fabiana C. Gennari, Pierre Arneodo Larochette, Horacio E. Troiani, Fahim Karimi, Claudio Pistidda, Rapee GosalawiteUtke, Julian Jepsen, Torben R. Jensen, Carsten Gundlach, Martin Tolkiehn, Jose Bellosta von Colbe, Thomas Klassen, Martin Dornheim, Journal of Power Sources Volume 267, 1 December 2014, Pages 799–811
• Cold Spraying of Amorphous Cu50Zr50 Alloys, A. List, F. Gärtner, H. Assadi and T. Klassen, T. Mori and S. Kuroda, Proc. ITSC 2014 Barcelona Spain, May 21 – 23, 2014, DVS-Berichte Volume 302, ISBN 978-3-87155-574-9, DVS Media GmbH, Düsseldorf, 2014, p. 136-141
• Analysis of Thermal History and Residual Stress in Cold-Sprayed Coatings, Z. Arabgol, H. Assadi, T. Schmidt, F. Gärtner, and T. Klassen, Journal of Thermal Spray Technology, 23 (2014), p. 84-90
• Kinetisches Spritzen zur Funktionalisierung von Oberflächen und für die generative Bauteilfertigung, T. Klassen, F. Gärtner, H. Assadi, M. Villa-Vidaller, K. Binder, K. Onizawa, A. List, K.-R. Ernst, S. Krebs, H. Gutzmann, Proceedings Hagener Symposium Pulvermetallurgie 33, November 27-28th, 2014, Hagen, Germany; Neue Horizonte in der Pulvermetallurgie – Werkstoffe, Produkte und Verfahren:, Fachverband Pulvermetallurgie, ed.: Herbert Danninger, Heimdall, http://d-nb.info/1065465173, ISBN: 978-3-939935-85-8; 2014, p. 97-116 (in German)

2013

• Cold Spraying of Ti₂AlC MAX-Phase Coatings, H. Gutzmann, F. Gärtner, D. Höche, C. Blawert, T. Klassen: Journal of Thermal Spray Technology Vol. 22 (2013), pp. 406-412 (doi:10.1007/s11666-012-9843-1)
• Effect of Substrate Temperature on Cold-Gas-Sprayed Coatings on Ceramic Substrates, K.-R. Ernst, J. Braeutigam, F. Gaertner, T. Klassen: Journal of Thermal Spray Technology Vol. 22 (2013), pp. 422-432 (doi: 0.1007/s11666-012-9871-x)
• Photocatalytic degradation of oxalic and dichloroacetic acid on TiO₂ coated metal substrates, I. Ivanova, J. Schneider, H. Gutzmann, J.-O. Kliemann, F. Gärtner, T. Klassen, D. Bahnemann, C. Mendive: Catalysis Today 209 (2013), p. 84-90
• MgH₂ as dopant for improved activation of commercial Mg ingot, P. Jain, J. Lang, N.Y. Skryabina, D. Fruchart, S.F. Santos, K. Binder, T. Klassen, J. Huot: Journal of Alloyws and Compounds, available online 7 June 2013,PII: S0925-8388(13)01259-0 (DOI: 10.1016/j.jallcom.2013.05.099)
• Compaction pressure influence on material properties and sorption behaviour of LiBH₄–MgH₂ composite, Julian Jepsen, Chiara Milanese, Alessandro Girella, Gustavo A. Lozano, Claudio Pistidda, José M. Bellosta von Colbe, Amedeo Marini, Thomas Klassen, Martin Dornheim, International Journal of Hydrogen Energy Volume 38, Issue 20, 9 July 2013, Pages 8357–8366
• Analysis of Thermal History and Residual Stress in Cold-Sprayed Coatings, Z.Arabgol, H. Assadi, T.Schmidt, F.Gärtner, T.Klassen, Journal of Thermal Spray Technology, ISSN 1059-9630 Journal of Therm Spray Tech DOI 10.1007/s11666-013-9976-x
• Cold gas spraying of semiconductor coatings for the photooxidation of water T. Emmler, H.Gutzmann, P. Hillebrand, M. Schieda, R. Just, F. Gärtner, P. Bogdanoff, I. Herrmann-Geppert, T. Klassen, Proceedings of SPIE Volume 8822, August 25-29, 2013, Paper 8822-11
• Nanoconfined 2LiBH₄–MgH₂–TiCl₃ in carbon aerogel scaffold for reversible hydrogen storage, Rapee Gosalawit-Utke, Chiara Milanese, Payam Javadian, Julian Jepsen, Daniel Laipple,Fahim Karmi, Julián Puszkiel, Torben R. Jensen, Amedeo Marini, Thomas Klassen, Martin Dornheim, International Journal of Hydrogen Energy, Volume 38, Issue 8, 19 March 2013, Pages 3275–3282
• Sorption behavior of the MgH₂–Mg₂FeH₆ hydride storage system synthesized by mechanical milling followed by sintering, Julián Puszkiel, Fabiana Gennari, Pierre Arneodo Larochette, Fahim Karimi, Claudio Pistidda, Rapee Gosalawit-Utke, Julian Jepsen, Torben R. Jensen, Carsten Gundlach, José Bellosta von Colbe, Thomas Klassen, Martin Dornheim, International Journal of Hydrogen Energy, Volume 38, Issue 34, 13 November 2013, Pages 14618–14630
• Cold Gas Sprayed TiO₂-Based Electrodes for the Photo-Induced Water Oxidation, I. Herrmann-Geppert, P. Bogdanoff, H. Gutzmann, T. Dittrich, T. Emmler, R. Just, M. Schieda, F. Gärtner and T. Klassen: ECS Transactions, 58 (30) (2014) pp. 21-30
• Cold Spraying of Cu-Al-Bronze for Cavitation Protection in Marine Environments, Sebastian Krebs, Oliver Wirth, Frank Gaertner, Thomas Klassen: Proc. SDMA 2013 – 5th Int. Conf. on Spray Deposition and Melt Atomization – 23-25 Sept. 2013 – Bremen, Germany
• Mechanical Properties of Cold-Sprayed Ti-6Al-4V Coatings, A. List, C. Lyphout, M. Villa, F. Gärtner, T. Klassen: Proceedings of the International Thermal Spray Conference, May 13–15, 2013, Busan, Republic of Korea (R.S. Lima, A. Agarwal, M.M. Hyland, Y.-C. Lau, G. Mauer, A. McDonald, F.-L. Toma, editors), ASM International 2013, pp. 155-160
• Analysis of Thermal History and Residual Stress in Cold Sprayed Coatings, Z. Arabgol, H. Assadi, T. Schmidt, F. Gärtner, T. Klassen: Proceedings of the International Thermal Spray Conference, May 13–15, 2013, Busan, Republic of Korea (R.S. Lima, A. Agarwal, M.M. Hyland, Y.-C. Lau, G. Mauer, A. McDonald, F.-L. Toma, editors), ASM International 2013, pp. 269-274
• Deformation and Adherence of Fe40Al- Particles in Cold Gas Spraying, N. Cinca, A. List, F. Gärtner, J. Fernández, J. M. Guilemany, T. Klassen: Proceedings of the International Thermal Spray Conference, May 13–15, 2013, Busan, Republic of Korea (R.S. Lima, A. Agarwal, M.M. Hyland, Y.-C. Lau, G. Mauer, A. McDonald, F.-L. Toma, editors), ASM International 2013, pp. 297-301
• Patterned CoCrMo and Al2O3 surfaces for reduced free wear debris in artificial joint arthroplasty, Mohamad Tarabolsi, Thomas Klassen, Frank Mantwill, Frank Gärtner, Frank Siegel, Arndt-Peter Schulz: JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 101 (12) 2013, pp. 3447-3456  (DOI: 10.1002/jbm.a.34644 )
• Mechanical characterization of mechanically alloyed ultrafine-grained Ti₅Si₃+40 vol{3728c0ddcf5026c65bc0b4e995c837d09025c3e7fa253cea254631dfe46bf841} γ-TiAl composites, C. Suryanarayana, Rainer Behn, Thomas Klassen, Rüdiger Bormann: Materials Science and Engineering: A Volume 579, 1 September 2013, Pages 18–25
• Effect of nitrogen flow rate on microstructures and mechanical properties of metallic coatings by warm spray deposition, Makoto Watanabe, Christoph Brauns, Masayuki Komatsu, Seiji Kuroda, Frank Gärtner, Thomas Klassen, Hiroshi Katanoda: Surface and Coatings Technology Volume 232, 15 October 2013, Pages 587–599
• Structural study of a new B-rich phase obtained by partial hydrogenation of 2NaH + MgB_2, Claudio Pistidda, Emilio Napolitano, Daphiny Pottmaier, Martin Dornheim, Thomas Klassen, Marcello Baricco, Stefano Enzo: International Journal of Hydrogen Energy Volume 38, Issue 25, 21 August 2013, Pages 10479–10484
• Nanoconfined 2LiBH₄–MgH₂ for reversible hydrogen storages: Reaction mechanisms, kinetics and thermodynamics, Rapee Gosalawit-Utke, Chiara Milanese, Thomas K. Nielsen, Fahim Karimi, Ivan Saldan, Klaus Pranzas, Torben R. Jensen, Amedeo Marini, Thomas Klassen, Martin Dornheim: International Journal of Hydrogen Energy Volume 38, Issue 4, 12 February 2013, Pages 1932–1942
• Interface melding in cold spray titanium particle impact, Peter C. King, Christian Busch, Teresa Kittel-Sherri, Mahnaz Jahedi, Stefan Gulizia, Surface & Coatings Technology 239 (2014) 191–199, Available online 27 November 2013

2012

• Einfluss der Düsengeometrie und der Aufprallparameter auf Mikrostruktur und Eigenschaften kinetisch gespritzter Titan-, TiAl6V4- und Molybdänschichten – Influence of nozzle geometry and impact parameters on microstructure and properties of kinetically sprayed titanium, TiAl6V4 and molybdenum coatings, K. Binder, F. Gärtner, T. Klassen: Thermal Spray Bulletin 64 (2012) [1] 40 – 46
• Effect of Substrate Temperature on Cold-Gas Sprayed Coatings on Ceramic Substrates, K.-R. Ernst, J. Braeutigam, F. Gaertner, T. Klassen: Thermal Spray 2012: Proceedings from the International Thermal Spray Conference and Exposition, May 21-24, 2012, Houston, Texas, USA. (eds.: R.S. Lima, A. Agarwal, M. M. Hyland, Y.-C. Lau, C.-J. Li, A. McDonald, F.-L. Toma), ASM International, pp 374 – 379
• Cold-Spraying of Ti₂AlC MAX-Phase Coatings, H. Gutzmann, F. Gärtner, D. Höche, C. Blawert, T. Klassen, Proc. ITSC 2012, Houston, May 21 – 24, 2012 , ASM International, p. 368-373
• Cold Spraying of Nickel Using High-End Parameter Sets, A. List, S. P. Buschmann, F. Gärtner, T. Klassen, Thermal Spray 2012: Proceedings from the International Thermal Spray Conference and Exposition, May 21-24, 2012, Houston, Texas, USA. (eds.: R.S. Lima, A. Agarwal, M. M. Hyland, Y.-C. Lau, C.-J. Li, A. McDonald, F.-L. Toma), ASM International, pp 363 – 367
• Impact Conditions for Cold Spraying of Hard Metallic Glasses, A. List, F. Gaertner, T. Schmidt, T. Klassen, Journal Thermal Spray Technology, Vol. 21 (2012) p. 531-540
• Photocatalytic degradation of oxalic and dichloroacetic acid on TiO₂ coated metal substrates, I. Ivanova, J. Schneider, H. Gutzmann, J.-O. Kliemann, F. Gärtner, T. Klassen, D. Bahnemann, C. Mendive, Catalysis Today 209 (2013), p. 84-90
• Economic potential of complex hydrides compared to conventional hydrogen storage systems, Julian Jepsen, José M. Bellosta von Colbe, Thomas Klassen, Martin Dornheim, International Journal of Hydrogen Energy, Volume 37, Issue 5, March 2012, Pages 4204–4214, Portable Fuel Cells – Fundamental and Applications (ISPFC2010)
• Optimization of hydrogen storage tubular tanks based on light weight hydrides, Gustavo A. Lozano, Chakkrit Na Ranong, Jose M. Bellosta von Colbe, Rüdiger Bormann, Jobst Hapke, Georg Fieg, Thomas Klassen, Martin Dornheim: International Journal of Hydrogen Energy Volume 37, Issue 3, February 2012, Pages 2825–2834 2010 AIChE Annual Meeting Topical Conference on Hydrogen Production and Storage Special Issue
• Gas permeation measurement under defined humidity via constant volume/variable pressure method, Pauls Jan Roman,Fritsch Detlev, Klassen Thomas, Peinemann Klaus-Viktor: Journal of Membrane Science Volume 389, 1 February 2012, Pages 343–348

2011

• Influence of Impact Angle and Gas Temperature on Mechanical Properties of Titanium Cold Spray Deposits, K. Binder, J. Gottschalk, M. Kollenda, F. Gärtner, T. Klassen; Journal of Thermal Spray Technology 20 (2011) p. 234-242
• Formation of Cold-Sprayed Ceramic Titanium Dioxide Layers on Metal Surfaces, J.-O. Kliemann, H. Gutzmann, F. Gärtner, H. Hübner, C. Borchers, T. Klassen; Journal of Thermal Spray Technology 20 (2011) p. 292-298.
• Metallization of thin Al₂O₃ layers in power electronics using cold gas spraying, K.-R. Donner, F. Gärtner, T. Klassen; Journal of Thermal Spray Technology, 20 (2011), p. 299-306.
• Effect and Pathway of Fluorine Atoms in a Ca(BH4)2-MgF2 Reversible Hydrogen Storage Systems, R. Gosalawit-Utke, K. Suarez, J. Bellosta von Colbe, U. Bösenberg, T. Jensen, Y. Cerenius, C. Bonatto Minella, C. Pistidda, G. Barkhordarian, M. Schulze, T. Klassen, R. Bormann, M. Dornheim, accepted for publication in The Journal of Physical Chemistry (2011)
• Effect of Transition Metal Fluorides on the Sorption Properties and Reversible Formation of Ca(BH4)2, Christian Bonatto Minella, Sebastiano Garroni, Claudio Pistidda, R. Gosalawit-Utke, Gagik Barkhordarian, Carine Rongeat, Inge Lindemann, Oliver Gutfleisch, Torben R. Jensen, Yngve Cerenius, Jeppe Christensen, Maria Dolores Bar, Rüdiger Bormann, Thomas Klassen, Martin Dornheim; The Journal of Physical Chemistry C, pubs.acs.org/JPCC, dx.doi.org/10.1021/jp107781m, receivde august 17,2010,  revised december 7,2010, Publication Date (Web): January 12, 2011
• Kaltgasspritzen: Ein neues Verfahren zur Beschichtung von Tiefdruckzylindern, T. Klassen, F. Gärtner, K. Onizawa, M. Schulze, K.-R. Donner; Flexo+Tief-Druck (technische Fachzeitschrift für alle Bereiche des modernen Flexodrucks, TechMedia GmbH, Gutach i. Br., Germany), im Druck Mai 2011
• Bald wird neuer Druck gemacht. Gisela Schütte, DIE WELT Hamburg, 24. Januar 2011
• Titandioxidkeramiken gegen Bakterien – antibakterielle Oberflächen durch Photokatalyse, J.-O. Kliemann, H. Gabriel, H. Gutzmann, F. Gärtner, T. Klassen; Keramische Zeitschrift 01 (2011), Forschung und Technik, p. 31-34
• Kaltgasspritzen von Zink- und Zinklegierungsschichten für Druckanwendungen, K. Onizawa, M. Schulze, F. Gärtner, T. Klassen; Geplant in: Thermal Spray Bulletin 2/2011, DVS Media GmbH.
• Chemical interaction and bonding in cold gas spraying, K.-R. Donner, R. Roedel, F. Gärtner, T. Klassen, Proc. ITSC 2011, Hamburg, September 27 – 29, 2011, DVS-Berichte Volume 276, DVS Media GmbH, Düsseldorf 2011, p. 94 – 99 (on USB flash disk)
• Application of parameter selection maps in cold spraying, H. Assadi, H. Richter, F. Gärtner, T. Schmidt, J.-O. Kliemann, K. Binder, T. Klassen, H. Kreye, Proc. ITSC 2011, Hamburg, September 27 – 29, 2011, DVS-Berichte Volume 276, DVS Media GmbH, Düsseldorf 2011, p.100 – 104 (on USB flash disk)
• Effect of nitrogen flow rate on mechanical properties of metallic coatings by warm spray deposition, M. Watanabe, C. Brauns, M. Komatsu, S. Kuroda, H. Katanoda, F. Gärtner, T. Klassen, Proc. ITSC 2011, Hamburg, September 27 – 29, 2011, DVS-Berichte Volume 276, DVS Media GmbH, Düsseldorf 2011, p.282 – 287 (on USB flash disk)
• Impact conditions for cold spraying of hard metallic glasses, A. List, F. Gärtner, T. Schmidt and T. Klassen, Proc. ITSC 2011, Hamburg, September 27 – 29, 2011, DVS-Berichte Volume 276, DVS Media GmbH, Düsseldorf 2011, p. 336-341 (on USB flash disk)
• Cold gas spraying of ceramics using the example of titanium dioxide, H. Gutzmann, S. Freese, F. Gärtner, T. Klassen, Proc. ITSC 2011, Hamburg, September 27 – 29, 2011, DVS-Berichte Volume 276, DVS Media GmbH, Düsseldorf 2011, p. 391-396 (on USB flash disk)
• Cold spraying of titanium using enhanced conditions and optimized nozzles, K. Binder, F. Gärtner, T. Klassen, Proc. ITSC 2011, Hamburg, September 27 – 29, 2011, DVS-Berichte Volume 276, DVS Media GmbH, Düsseldorf 2011, p. 879-884 (on USB flash disk)
• Synthesis of nanocomposites and amorphous alloys by mechanical alloying, C. Suryanarayana • T. Klassen • E. Ivanov; Journal of Materials Science 46 (2011), p. 6301-6315.
• On Parameter Selection in Cold Spraying, H. Assadi, T. Schmidt, H. Richter, J.-O. Kliemann, K. Binder, F. Gärtner, T. Klassen und H. Kreye, Journal of Thermal Spray Technology, online first 2011
• Optimization of hydrogen storage tubular tanks based on light weight hydrides, Gustavo A. Lozano, Chakkrit Na Ranong, Jose M. Bellosta von Colbe, Rüdiger Bormann, Jobst Hapke, Georg Fieg, Thomas Klassen, Martin Dornheim; Proc. International Journal of Hydrogen Energy XXX (2011)  1-10, Received 19 November 2010 Received in revised form 2 March 2011 Accepted 7 March 2011 Available online xxx
• Enhanced volumetric hydrogen density in sodium alanate by compaction, Gustavo A. Lozano∗, Jose M. Bellosta von Colbe, Rüdiger Bormann, Thomas Klassen, Martin Dornheim, Journal of Power Sources 196 (2011) 9254– 9259, Received 19 April 2011 Received in revised form 13 July 2011 Accepted 15 July 2011 Available online 22 July 2011
• Behavior of scaled-up sodium alanate hydrogen storage tanks during sorption, Jose´ M. Bellosta von Colbe, Oliver Metz, Gustavo A. Lozano, P. Klaus Pranzas, Heinz W. Schmitz, Felix Beckmann, Andreas Schreyer, Thomas Klassen, Martin Dornheim, Internatuional Journal of Hydrogen Energy XXX (2011) 1-5, Received 19 November 2010 Received in revised form 16 March 2011 Accepted 22 March 2011 Available online xxx
• Sorption and desorption properties of a CaH2/MgB2/CaF2 reactive hydride composite as potential hydrogen storage material, K. SuarezAlcantara, U.Boesenberg, O.Zavorotynska, J.BellostavonColbe, K.Taube, M. Baricco, T.Klassen, M.Dornheim, Journal of Solid State Chemistry, Received 10 May 2011 Received in revised form 30 August 2011 Accepted 14 September 2011
• Activation of the reactive hydride composite 2NaBH4 + MgH2, C. Pistidda, G. Barkhordarian, A. Rzeszutek, S. Garroni, C. Bonatto Minella, M.D. Baro´ , P. Nolis, Rüdiger Bormann, T. Klassen  and M. Dornheim, ScienceDirect Scripta Materialia 64 (2011) 1035-1038, Received 17 January 2011; accepted 13 February 2011 Available online 18 February 2011
• Kaltgasspritzen von Zink- und Zinklegierungsschichten für Druckanwendungen – Cold gas spraying of zinc and zinc alloy coatings for printing applications, K. Onizawa, M. Schulze, F. Gärtner, T. Klassen, Thermal Spray Bulletin 63 (2011) [2] 172-178
• Impact Conditions for Cold Spraying of Hard Metallic Glasses, A. List, F. Gärtner, T. Schmidt, T. Klassen, Journal of Thermal Spray Technology,submitted September 26, 2011,  revised from Januaray 16, 2012, DOI:10.1007/s11666-012-9750-5

2010

• Potential of cold gas spraying in power electronic applications, K.-R. Donner, F. Gärtner, T. Klassen; Proc. International Thermal Spray Conference ITSC 2010, May 2010, Singapore, DVS-Verlag, Düsseldorf,  DVS-Berichte Vol. 264 (2010), p. 262-267.
• Layer formation of cold-sprayed ceramic titanium dioxide layers on metal surfaces, J.-O. Kliemann, H. Gutzmann, F. Gärtner, T. Klassen, I. Jursic, C. Borchers; Proc. International Thermal Spray Conference ITSC 2010, May 2010, Singapore, DVS-Verlag, Düsseldorf, DVS-Berichte Vol. 264 (2010), p. 90-95.
• Evaluation of the photocatalytic activity of TiO₂-coatings prepared by different thermal spray techniques, H. Gutzmann, J.-O. Kliemann, R. Albrecht, F. Gärtner, T. Klassen, F.-L. Toma, L.-M. Berger, B. Leupolt; Proc. International Thermal Spray Conference ITSC 2010, May 2010, Singapore, DVS-Verlag, Düsseldorf, DVS-Berichte Vol. 264 (2010), p. 167-171.
• Cold spraying for titanium dioxide coatings with high photocatalytic bactericidal activity, J.-O. Kliemann, H. Gutzmann, F. Gärtner, T. Klassen, H. Gabriel; Proc. International Thermal Spray Conference ITSC 2010, May 2010, Singapore, DVS-Verlag, Düsseldorf, DVS-Berichte Vol. 264 (2010), p. 341-344.
• Antibakterielle Oberflächen durch Photokatalyse – kaltgasgespritzte Titandioxid-Beschichtungen – Bactericidal effect of cold sprayed titanium dioxide coatings, J.-O. Kliemann, H. Gutzmann, F. Gärtner, T. Klassen, H. Gabriel; Thermal Spray Bulletin, DVS-Verlag, Düsseldorf, (2/2010), p. 110-114.
• Basic principles and application potentials of cold gas spraying / Bindemechanismen und potentielle Anwendungen des Kaltgasspritzens, T. Klassen, F. Gärtner, T. Schmidt, J.-O. Kliemann, K. Onizawa, K.-R. Donner, H. Gutzmann, K. Binder, H. Kreye; Materialwissenschaft und Werkstofftechnik  / Materials Science and Engineering Technology, 41 (2010) p. 575–584.
• Cold Spraying of Zn and Zn-Alloy coatings for Print Applications, K. Onizawa, J. Jansen, M. Schulze, F. Gärtner, T. Klassen; Proc. ITSC 2010, Thermal Spray: Global Solutions for Future Application, DVS-Berichte Volume 264, DVS Media GmbH, Düsseldorf, Germany, 2010, p. 178-181 (on CD)
• Estimation of temperature profile on electrode tip, G. Huismann: IIW Commission XII , Intermediate meeting 2010, Paris
• Determining and Avoiding HAC on Pipeline Repair, G. Huismann, N. Woodward, M. Armstrong, H. Hoffmeister, H. O. Knagenhjelm OMAE2010, June 6-11, 2010, Shanghai, China, OMAE2010-20748
• Heat transfer to the wire electrode in AC-MIG welding, G. Huismann: IIW annual meeting, Istanbul, 2010, Doc. XII-1998-10
• Droplet temperatures in GMAW process,G. Huismann: IIW annual meeting, Istanbul, 2010, Doc.212-1185-10
• Ti-Parts for Aviation Industry produced by Cold Spraying, K. Binder, F. Gärtner, T. Klassen; Proc. International Thermal Spray Conference & Exposition 2010, Thermal Spray: Global Solutions for Future Application (DVS-ASM), Published: May 2010, p. 572-577
• Role of additives in LiBH₄-MgH₂ reactive hydride composite for sorption kinetics, U. Bösenberg, J.W. Kim, D. Gosslar, N. Eigen, T.R. Jensen, J.M. Bellosta von Colbe, Y. Zhou, M. Dahms, D.H. Kim, R. Günther, Y.W. Cho, K.H. Oh, T. Klassen, R. Bormann, M. Dornheim; Acta Materialia 58, (2010)  p. 3381-3389
• Economical and engineering scalability of complex hydrides as new promising hydrogen storage materials, J. Jepsen,J. Bellosta von Colbe, T. Klassen, M. Dornheim; Proc. International Symposium on Metal-Hydrogen Systems, MH 2010. Moskau (RUS), 19.-23.07.2010, 2010.
• Hydrogen Storage using light metal hydrides: Testing, Scale-up and System Integration, G. Lozano, O. Metz, J.  Jepsen, S. Dorn, D. Meyer, M. Dornheim; Proc. International Conference on Synthesis, Characterization, Consolidation and Modelling of Nanomaterials, ICON 2010. Coimbatore (IND), 05.-06.03.2010, 2010.
• Kaltgasspritzen von harten Zn – Legierungsschichten für Druckanwendungen, K. Onizawa, J. Jansen, M. Schulze, F. Gärtner, T. Klassen; Proc. 13. Werkstofftechnisches Kolloquium, 30.09 – 01.10, 2010, (ed. B. Wielage), Reihe: Werkstoffe und Werkstofftechnische Anwendungen, Band 37, TU- Chemnitz, Germany, ISBN 978—3-00-032471-0, p. 64-70
• Cold Spraying: Mechanisms, Developments and Applications, T. Klassen, F. Gärtner, T. Schmidt, K.-R. Donner, K. Onizawa, K. Binder, J.-O. Kliemann, H. Gutzmann, H. Kreye; Proc. 4th Tsukuba International Coatings Symposium, December 9th to 10th, 2010, Tsukuba, Japan (2010), p. 1 – 2.
• Cold Spray coatings for printing rolls, K. Onizawa, M. Schulze, F. Gärtner, T, Klassen; Proc. 4th Tsukuba International Coatings Symposium, December 9th to 10th, 2010, Tsukuba, Japan (2010), p. 45-46.
• Evaluation of mechanical properties of kinetically sprayed coatings, F. Gärtner, T. Schmidt, K. Binder, T. Klassen, H. Kreye; Proc. 4th Tsukuba International Coatings Symposium, December 9th to 10th, 2010, Tsukuba, Japan (2010), p. 47-48

2009

• Investigation of (Mg, Al, Li, H)-based hydride and alanate mixtures produced by reactive ball milling, A. Leon, O. Zabara, S. Sartori, N. Eigen, M. Dornheim, T. Klassen, J. Muller, B. Hauback, M. Fichtner; Journal of Alloys and Compounds 476 (2009), p. 425-428
• Reversible hydrogen storage in NaF-Al composites , N. Eigen, U. Bösenberg, J. Bellosta von Colbe, T. R. Jensen, Y. Cerenius, M. Dornheim, T. Klassen, R. Bormann; Journal of Alloys and Compounds 477 (2009) p. 76-80
• Kaltgasgespritzte Schichten zum Lasergravieren für Tiefdruckwalzen, K. Onizawa, J. Jansen, M. Schulze, F. Gärtner, T. Klassen; in: Proc. 12. Werkstofftechnisches Kolloquium, October 01. – 02., 2009, (ed. B. Wielage), Reihe: Werkstoffe und Werkstofftechnische Anwendungen, Band 35, TU- Chemnitz, Germany, ISBN 978—3-00-029007-7, p. 384-389.
• Kaltgasspritzen – neue Entwicklungen und Anwendungen / Cold spraying – new developments and application potential, T. Klassen, J. – O. Kliemann, K. Onizawa, K. Donner, H. Gutzmann, K. Binder, T. Schmidt, F. Gärtner, H. Kreye; in: Proc. 8. Kolloqium Hochgeschwindigkeits – Flammspritzen, Erding, Germany, November 05. – 06., 2009, (ed.: P. Heinrich), Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany, (2009) p. 17-26.
• Partikelbeschleunigung, Aufprall und Schichtbildung beim Kaltgasspritzen / Particle acceleration, impact and coating formation in cold spraying, H. Assadi, H. J. Richter, F. Gärtner, T. Schmidt, T. Stoltenhoff, H. Kreye; in: Proc. 8. Kolloqium Hochgeschwindigkeits – Flammspritzen, Erding, Germany, November 05. – 06., 2003, (ed.: P. Heinrich), Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany, (2009) p. 27-36.
• From Particle Acceleration to Impact and Bonding in Cold Spraying , T. Schmidt, H. Assadi, F. Gärtner, H. Richter, T. Stoltenhoff, H. Kreye, T. Klassen; Journal of Thermal Spray Technology, Vol. 18, Issue 5 (2009),  p. 794-808
• Erratum to: From Particle Acceleration to Impact and Bonding in Cold Spraying , T. Schmidt, H. Assadi, F. Gärtner, H. Richter, T. Stoltenhoff, H. Kreye, T. Klassen; Journal of Thermal Spray Technology, Vol. 18, Issue 5 (2009), p. 1038
• A search for new Mg- and K-containing alanates for hydrogen storage , Sabrina Sartori, Xiumei Qi, Nico Eigen, Jiri Muller, Thomas Klassen, Martin Dornheim, Bjørn C. Hauback, International Journal of Hydrogen Energy, 34, 10, (2009) p. 4582-4586.
• Investigation of (Mg, Al, Li, H)-based hydride and alanate mixtures produced by reactive ball milling , Aline Léon, Oleg Zabara, Sabrina Sartori, Nico Eigen, Martin Dornheim, Thomas Klassen, Jiri Muller, Bjørn Hauback, Maximilian Fichtner, Journal of Alloys and Compounds 476 (2009) p. 425-428

2008

• High strain rate deformation microstructures of stainless steel 316L by cold spraying and explosive powder compaction, C. Borchers, T. Schmidt, F. Gärtner, H. Kreye: Journal of Applied Physics, A 90 (2008), p. 517-526
• Low-temperature superplasticity in ultrafine-grained Ti₅Si₃-TiAl composites, T. Klassen, C. Suryanarayana, R. Bormann: Scripta Materialia 59 (2008),  p. 455-458
• Testing hydrogen assisted cracking for hyperbaric repair welds, G. Huismann, H.O. Knagenhjelm, N. Woodward, H. Hoffmeister: Trends in Welding Research, Pine Mountain, USA, Juni 2008
• Eintrag von Wasserstoff, insbesondere über das Schutzgas beim Schweißen von Aluminiumwerkstoffen, ILA Tagung Schweißen in Luft- und Raumfahrt, 2008, Berlin
• Improved hydrogen sorption of sodium alanate by optimized processing, N. Eigen, F. Gosch, M. Dornheim, T. Klassen, and R. Bormann, Journal of Alloys and Compounds 465 (2008), p. 310-316.
• Influence of particle size on electrochemical and gas-phase hydrogen storage in nanocrystalline Mg, O. Friedrichs, L, Kolodziejczyk, JC. Sanchez-Lopez, A. Fernandez, L. Lyubenova, D. Zander, U. Koster, KF. Aguey-Zinsou, T. Klassen, R. Bormann: Journal of Alloys and Compounds 463 (2008), p. 539-545
• Thermal and mechanically activated decomposition of LiAlH₄, Ares, JR, Aguey-Zinsou, KF, Porcu, M, Sykes, JM, Dornheim, A, Klassen, T, Bormann, R, Materials Research Bulletin 43 (2008), p. 1263-1275.
• Formation of Ca(BH4)(2) from hydrogenation of CaH2+MgB2 composite, G. Barkhordarian, TR. Jensen, S. Doppiu, U. Bosenberg, A. Borgschulte, R., Gremaud, Y. Cerenius, M. Dornheim, T. Klassen, R. Bormann: Journal of Physical Chemistry C 112 (2008), p. 2743-2749
• Einsatz des Kaltgasspritzens für den Korrosionsschutz, H. Kreye, T. Schmidt, F. Gärtner, T. Klassen: Proc. ZVO Oberflächentage 2008, Würzburg, September 24th – 26th 2008, ZVO Zentralverband OberfIächentechnik, 40710 Hilden, Germany, ISBN 978-3-9806061-7-2, 2008, on CD, p. 12 – 15.
• Correlation of Particle Impact Conditions and Coating Properties in Cold Spraying, T. Schmidt, F. Gärtner, H. Kreye, T. Klassen: Proc. Thermal Spray Crossing Borders, E. Lugscheider, Ed., DVS-Verlag GmbH, Düsseldorf, Germany, ISBN 978-3-8715-979-2, 2008, on CD, p. 724-731
• Invited Lecture: Stability of the MIG Process Operating on Different Power Levels, G. Huismann: 8th International Welding Symposium, November 16-18, 2008 Kyoto International Conference Center, Kyoto, Japan

2007

• Present Status and Future Prospects of Cold Spraying,  F. Gärtner, T. Schmidt, H. Kreye, in: Proc. Powder Metallurgy World Congress 2006 (PM2006): Materials Science Forum 534-536 (2007), p. 433-436
• Kaltgasspritzen – Eine Analyse des Materialverhaltens beim Partikelaufprall und die daraus abgeleitete Prozessoptimierung, T. Schmidt: Dissertation 2007, Hamburg, Shaker Verlag 2007, Aachen,  ISBN 978-3-8322-6399-7
• Effect of Nb₂O₅ on MgH₂ properties during mechanical milling, K.-F. Aguey-Zinsou, J. R. Ares Fernandez, T. Klassen, R. Bormann: International Journal of Hydrogen Energy 32 (2007), p. 2400-2407
• Mechanical and thermal decomposition of LiAIH₄ with metal halides, J. R. Ares Fernandez, F. Aguey-Zinsou, M. Elsaesser, X. Z. Ma, M. Dornheim, T. Klassen, R. Bormann: International Journal of Hydrogen Energy 32 (2007),  p. 1033-1040
• Influence of impurities on the milling process of MgH₂, J. R. Ares, K.-F. Aguey-Zinsou, T. Klassen, R. Bormann: Journal of Alloys and Compounds 434-435 (2007), p. 729-733
• Effect of nanosized oxides on MgH₂ (de)hydriding kinetics, K.-F. Aguey-Zinsou, T. Nicolaisen, J. R. Ares Fernandez, T. Klassen, R. Bormann: Journal of Alloys and Compounds 434-435 (2007), p. 738-742
• Influence of the Nb₂O₅ distribution on the electrochemical hydrogenation of nanocrystalline magnesium, D. Zander, L. Lyubenova, U. Koster, T. Klassen, M. Dornheim: Journal of Alloys and Compounds 434-435 (2007), p. 753-755
• Hydrogen storage in magnesium-based hydrides and hydride composites, M. Dornheim, S. Doppiu, G. Barkhordarian, U. Boesenberg, T. Klassen, O. Gutfleisch, R. Bormann: Scripta Materialia 56 (2007), p. 841-846
• State of the Art in Cold Spraying – Coating Microstructure and Properties, T. Schmidt, F. Gaertner, H. Kreye, T. Klassen, in: Tagungsbeitrag EBAT 2007, März 22-26, 2007, Florianopolis, Brasilien, auf CD
• Cold Spraying – From Thermal Spraying to Kinetic Spraying, H. Kreye, T. Schmidt, F. Gärtner, T. Klassen, in: Tagungsbeitrag EBAT 2007, März 22-26, 2007, Florianopolis, Brasilien, auf CD
• Current Concepts and Conditions for High Velocity Oxy-Fuel Flame Spraying, F. Gärtner, H. Kreye, H. J. Richter, in: Tagungsbeitrag EBAT 2007, März 22-26, 2007, Florianopolis, Brasilien, auf CD
• Present Status and Future Prospects of Cold Spraying, F. Gärtner, T. Schmidt, H. Kreye:
• Kaltgasspritzen: Konzepte zur Beschichtung mit temperaturempfindlichen Werkstoffen, F. Gärtner, T. Schmidt, H. Kreye, T. Klassen: Pulvermetallurgie für hochpräzise Bauteile und dichte Hochleistungswerkstoffe, H. Kolaska (Hrsg.), Reihe „Pulvermetallurgie in Wissenschaft und Praxis“, Band 23, Tagungsbeiträge des Hagener Symposiums am 29. und 30.11.2007, Heimdall Verlag, Fachverband Pulvermetallurgie, 2007, S. 149-157
• Industrial production of light metal hydrides for hydrogen storage, N. Eigen, C. Keller, M. Dornheim, T. Klassen, R. Bormann: Scripta Materialia 56 (2007), 847-851
• Synthesis of NaAlH4-based hydrogen storage material using milling under low pressure hydrogen atmosphere , N. Eigen, M. Kunowsky, T. Klassen, R. Bormann: Journal of Alloys and Compounds 430 (2007), 350-355
• Hydrogen sorption properties of MgH₂-LiBH₄ composites, U. Bosenberg, S. Doppiu, L. Mosegaard, G. Barkhordarian, N. Eigen, A. Borgschulte, TR Jensen, Y. Cerenius, O. Gutfleisch, T. Klassen, M. Dornheim, R. Bormann: Acta Materialia 55 (2007) 3951-3958
• Unexpected kinetic effect of MgB₂ in reactive hydride composites containing complex borohydrides, G. Barkhordarian, T. Klassen, M. Dornheim, R. Bormann: Journal of Alloys and Compounds 440 (2007), L18-L21.

2006

• Development of a Generalized Parameter Window for Cold Spray Deposition, T. Schmidt, F. Gärtner, H. Assadi, H. Kreye: Acta Materialia 54 (2006), p. 729-742
• Bonding Mechanisms and Applications of Cold Spraying, F. Gärtner, H. Assadi, H. Kreye, T. Schmidt, T. Stoltenhoff: Proc. SMT 18, Dijon, November 15th – 17th 2004, “Surface Modification Technologies XVIII”, Eds. T. S. Sudarshan, M. Jeandin, J.J. Stiglich, Maney Publishing, London, UK, 2006, p. 35-43
• Two-body Abrasive Wear of Nano- and Microcrystalline TiC-Ni-Based Thermal Spray Coatings, X. Qi, N. Eigen, E. Aust, F. Gärtner, T. Klassen, R. Bormann: Surface and Coatings Technology 200 (2006), p. 5037-5047
• Microstructures and Key Properties of Cold-sprayed and Thermally Sprayed Copper Coatings, T. Stoltenhoff, C. Borchers, F. Gärtner, H. Kreye: Surface Coating Technology, Surface and Coatings Technology 200 (2006), p. 4947-4960
• TiC-Based Cermet-Coatings: Advanced Wear Performance by Nanocrystalline Microstructure, X. Qi, E. Aust, N. Eigen, T. Klassen, R. Bormann, F. Gärtner: Advanced Engineering Materials 8 (2006), p. 427-433
• The Cold Spray Process and its Potential for Industrial Applications,F. Gärtner, T. Stoltenhoff, T. Schmidt, H. Kreye: J. Thermal Spray Technology 15 (2006), p. 223-232
• New Developments in Cold Spray Based on Higher Gas- and Particle Temperatures, T. Schmidt, F. Gärtner, H. Kreye: “Thermal Spray 2006: Science, Innovation, and Application”, Eds. B. R. Marple, C. Moreau, ASM International, Materials Park, OH, USA, 2006, ISBN 0-87170-809-4, on CD, article no.: s2_2-12003
• The Cold Spray Process and its Optimization, H. Kreye, T. Schmidt, F. Gärtner, T. Stoltenhoff: “Thermal Spray 2006: Science, Innovation, and Application”, Eds. B. R. Marple, C. Moreau, ASM International, Materials Park, OH, USA, 2006, ISBN 0-87170-809-4, on CD, article no.: s2_1-12011, Also in: Journal of Thermal Spray Technology 15 (2006), p. 488-494
• Recent Developments and Potential Applications of Cold Spraying, F. Gärtner, R. Schmidt, T. Stoltenhoff, H. Kreye: Advanced Engineering Materials 8 (2006), p. 611-618
• Mechanical Properties of Cold Sprayed and Thermally Sprayed Copper Coatings, F. Gärtner, T. Stoltenhoff, J. Voyer, H. Kreye, S. Riekehr, M. Koçak, Surface and Coatings Technology 200 (2006), p. 6770-6782
• Advances in Cold Spraying, F. Gärtner, invited guest editorial for Surface Engineering (2006), Vol. 22, No. 3, p. 161-163
• Characteristics of Particle Bonding and Material Deposition in Cold Spraying, H. Assadi, T. Schmidt, F. Gärtner, H. Kreye: Proc. of Aerospace Materials and Manufacturing Processes: Emerging Materials, Processes, and Repair Techniques, Eds. M. Jahazi, M. Elboujdaïni and P. Patnaik, COM 2006, 1-4 October 2006, Montreal, Canada, pp. 49-59
• Influence of impact velocity on the extent of bonded interfaces in cold gas spraying, H. Assadi, F. Gärtner 2*, C. Borchers, T. Stoltenhoff, H. Kreye: in preparation.
• Simulation of Solid Particle Impact Behavior for Spray Processes, K. Yokoyama, M. Watanabe, S. Kuroda, Y. Gotoh, T. Schmidt, F. Gärtner: Materials Transactions(2006) p. 1697-1702
• Kaltgasspritzen – Vom thermischen Spritzen zum kinetischen Spritzen / Cold Spraying – From Thermal Spraying to Kinetic Spraying, H. Kreye, F. Gärtner, T. Schmidt, T. Klassen, in: Proc. 7. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2006, November 9-10, 2006 (ed.: P. Heinrich), Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany, (2006), S. 9-16
• Mikrostruktur und Eigenschaften von Kaltgas-Spritzschichten / Microstructure and Properties of Cold Sprayed Coatings, T. Schmidt, F. Gärtner, H. Kreye, T. Klassen, in: Proc. 7. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2006, November 9-10, 2006 (ed.: P. Heinrich), Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany, (2006), S. 17-28
• HVOF Spritzen mit Pulver und Draht / HVOF Spraying with powder and wire, F. Gärtner, H. Kreye, H.J. Richter, in: Proc. 7. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2006, November 9-10, 2006 (ed.: P. Heinrich), Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany, (2006), S. 739-56
• Tribology of Titanium Coatings Fabricated by Warm Spray Process with in-situ Zircon Beads Addition, S. Krebs, J. Kawakita, S. Kuroda, F. Gärtner, in: Proceedings of 114^th Meeting of the Surface Finishing Society Japan 2006, p.156-157
• Chemical and microstructural study of the oxygen passivation behaviour of nanocrystalline Mg and MgH₂, O. Friedrichs, J.C. Sanchez-Lopez, C. Lopez-Cartes, M. Dornheim, T. Klassen, R. Bormann, A. Fernandez: Applied Surface Science 252 (2006), p. 2334-2345
• MgH₂ with Nb₂O₅ as additive, for hydrogen storage: Chemical, structural and kinetic behavior with heating, O. Friedrichs, F. Aguey-Zinsou, J.R. Ares Fernandez, J.C. Sanchez-Lopez, A. Justo, T. Klassen, R. Bormann, A. Fernandez: Acta Materialia 54 (2006), p. 105-110
• Hydrogen sorption improvement of nanocrystalline MgH₂ by Nb₂O₅ nanoparticles, O. Friedrichs, T. Klassen, J.C. Sanchez-Lopez, R. Bormann, A. Fernandez: Scripta Materialia 54 (2006), p. 1293-1297
• ASAXS study of the catalyst distribution in nanostructured MgH₂/Me_xO_y, P.K. Pranzas, M. Dornheim, J.R. Ares, K.-F. Aguey-Zinsou, V. Leiner, T. Klassen, A. Schreyer, G. Goerigk: DESY-Berichte 2006
• Structural characterisation of nanocrystalline MgH₂ for reversible storage of hydrogen using SAXS/USAXS, M. Dornheim, P.K. Pranzas, J.R. Ares, K.-F. Aguey-Zinsou, T. Klassen, A. Schreyer, R. Gehrke: DESY-Berichte
• Nanocrystalline Light Metal Hydrides For Hydrogen Storage, T. Klassen: Kapitel in: “Nanostructure Control of Materials”, ed. by R. Hannink, A. Hill (ISBN-10: 1-85573-933-X, Woodhead Publishing, Cambridge, England, 2006) p. 266-302
• SANS/USANS investigations of nanocrystalline MgH₂for reversible storage of hydrogen, P.K. Pranzas, M. Dornheim, D. Bellmann, K.-F. Aguey-Zinsou, T. Klassen, A. Schreyer: Physica B: Condensed Matter 385-386 (2006), p. 630-632
• Mechanical and thermal decomposition of LiAlH₄ with metal halides, J. R. Ares Fernandez, F. Aguey-Zinsou, M. Elsaesser, X.Z. Ma, M. Dornheim, T. Klassen, R. Bormann: International Journal of Hydrogen Energy, in Press, Corrected Proof, Available online 18 September 2006
• Using MgO to improve the (de)hydriding properties of magnesium, K.-F. Aguey-Zinsou, J. R. Ares Fernandez, T. Klassen, R. Bormann: Materials Research Bulletin 41, (2006), p. 1118-1126
• The catalytic effect of Nb₂O₅ on the electrochemical hydrogenation of nanocrystalline magnesium, D. Zander, L. Lyubenova, U. Köster, M. Dornheim, F. Aguey-Zinsou, T. Klassen: Journal of Alloys and Compounds 413 (2006), p. 298-301
• Nb₂O₅ „pathway effect“ on hydrogen sorption in Mg, O. Friedrichs, J.C. Sanchez-Lopez, C. Lopez-Cartes, T. Klassen, R. Bormann, A. Fernandez: Journal of Physical Chemistry B 110 (2006), p. 7845-7850
• Tailoring Hydrogen Storage Materials towards Application, M. Dornheim, N. Eigen, G. Barkhordarian, T. Klassen, R. Bormann: Advanced Engineering Materials 8 (2006), p. 377-385.
• Catalytic Mechanism of Transition-Metal Compounds on Mg Hydrogen Sorption Reaction of Magnesium Catalyzed with Different Nb₂O₅ Contents, G. Barkhordarian, T. Klassen, R. Bormann: Journal of Alloys and Compounds 407 (2006) 249-255
• Kinetic Investigation of the Effect of Milling Time on the hydrogen sorption raction, G. Barkhordarian, T. Klassen, R. Bormann: Journal of Physical Chemistry B 110 (2006), p. 11020-11024.
• Effect of Nb₂O₅ on MgH₂ properties during mechanical milling, K.-F. Aguey-Zinsou, J.R. Ares Fernandez, T. Klassen, R. Bormann: International Journal of Hydrogen Energy 32 (2006), p. 2400-2407
• Nanocrystalline intermetallic Mg₂Ni produced in a batch scale mill, E. Martinez-Franco, T. Klassen, R. Bormann, D. Jaramillo, H. BalmoriRamirez, M. Brito, J.G. CabanasMoreno, H.A. CalderonBenavides, K. Ishizaki, A. SalinasRodriguez: Symposium on Advanced Structural Materials held at the Annual Congress of the Mexican-Academy-of-Materials-Science 2004 (Cancun, Mexico), Advanced Structural Materials II 509 (2006), p.141-145
• Kinetic investigation of the effect of milling time on the hydrogen sorption reaction of magnesium catalyzed with different Nb₂O₅contents, Gagik Barkhordarian, Thomas Klassen, Rüdiger Bormann: Journal of Alloys and Compounds Volume 407, Issues 1–2, 5 January 2006, Pages 249–255
• In-Situ Densification of Ti Coatings by the Warm Spray (Two-Stage HVOF) Process, Jin Kawakita, Seiji Kuroda, Sebastian Krebs; Hiroshi Katanoda, Materials Transactions, Vol. 47, No. 7 (2006) pp. 1631 to 1637 Special Issue on Thermal Spraying

2005

• Microstructures and Properties of Nanocrystalline Thermal Spray Coating Using High-Energy Milled Cermet Powders, N. Eigen, T. Klassen, E. Aust, R. Bormann, F. Gärtner: Surface and Coatings Technology 195 (2005), p. 344-357
• Formation of persistent dislocation loops by ultra-high strain-rate deformation during cold spraying, C. Borchers, F. Gärtner, T. Stoltenhoff, H. Kreye: Acta Materialia 53, (2005), p. 2991-3000
• High Velocity Impact Phenomena and Coating Quality in Cold Spraying, T. Schmidt, F. Gärtner, H. Assadi, T. Stoltenhoff, H. Kreye: Proc. International Thermal Spray Conference ITSC 2005, May 2005, Basel, Switzerland, E.F. Lugscheider, Ed., DVS-Verlag, Düsseldorf, 2005, p. 232-238
• The Cold Spray Process and its Potential for Industrial Applications, F. Gärtner, T. Stoltenhoff, T. Schmidt, H. Kreye: Proc. International Thermal Spray Conference ITSC 2005, May 2005, Basel, Switzerland, E.F. Lugscheider, Ed., DVS-Verlag, Düsseldorf, 2005, p. 158-163
• Schichten und Strukturen durch Kaltgasspritzen, H. Kreye, F. Gärtner, T. Schmidt, T. Stoltenhoff, H.J. Richter, H. Assadi: Uniforschung (2005), S. 27-31
• Improvement in H-sorption kinetics of MgH₂ powders by using Fe nanoparticles generated by reactive FeF₃ addition, A.R. Yavari, A. LeMoulec, F.R. de Castro, S. Deledda, O. Friedrichs, W.J. Botta, G. Vaughan, T. Klassen, A. Fernandez, A. Kvick: Scripta Materialia 52, (2005), p. 719-724
• H-Sorption in MgH₂ Nanocomposites Containing Fe or Ni with Fluorine, S. Deledda, A. Borissova, C. Poisignon, W. J. Botta, A. R. Yavari, M. Dornheim, T. Klassen: Journal of Alloys and Compounds 404-406 (2005) p. 409-412
• Thermodynamic properties and absorption-desorption kinetics of Mg₈₇Ni₁₀Al₃ alloy synthesised by reactive ball milling under H₂ atmosphere, S. Doppiu, P. Solsona, T. Spassov, G. Barkhordarian, M. Dornheim, T. Klassen, S. Suriñach, M.D. Baró: Journal of Alloys and Compounds 404-406,08 December 2005, p. 27-30
• Thermal Stability of Nanocrystalline MgH₂ for Hydrogen Storage, P.-A. Huhn, M. Dornheim, T. Klassen, R. Bormann:Journal of Alloys and Compounds, p. 404-406, 08 December 2005,p. 499-502

2004

• Kaltgasspritzen von Kupfer ? Eine strömungsmechanische und werkstoffkundliche Analyse und Optimierung des Spritzprozesses, T. Stoltenhoff: Dissertation Oktober 2003, Hamburg, Shaker Verlag 2004, Aachen. ISBN 3-8322-2302-9
• Kaltgasspritzen zur Herstellung oxidarmer metallischer Schichten, H. Kreye, T. Stoltenhoff: der praktiker 2/2004, S. 42-46
• Microstructural bonding features of cold sprayed face centered cubic metals, C. Borchers, F. Gärtner, T. Stoltenhoff, H. Kreye:Journal of Applied Physics, Vol. 96 (2004), No. 8, p. 4288-4292
• Abrasive wear mechanisms of VPS- and HVOF-sprayed TiC-Ni-based nanocrystalline coatings, X. Qi, E. Aust, N. Eigen, F. Gärtner, R. Bormann: Proc. DGM Conf. Reibung und Verschleiß, Fürth, Germany, March 10 ? 12, 2004, Materialwissenschaft und Werkstofftechnik 35 (2004), S. 779-784
• Recent Developments in High Velocity Oxy-Fuel Flame Spraying, H. Kreye, F. Gärtner: Proc. 1^st Tsukuba International (Japanese-German) Coatings Symposium: Recent Trends in Coatings Technology to Challenge Harsh Environments and to Open New Applications, Tsukuba, Japan, May 17?18, 2004, (ed. S. Kuroda), National Institute for Materials Science, Tsukuba, Japan, (2004), p. 4-5
• Process Analysis and Bonding Mechanism of Cold Spraying, F. Gärtner, T. Schmidt, H. Assadi, T. Stoltenhoff, H. Kreye: Proc. 1^st Tsukuba International (Japanese-German) Coatings Symposium: Recent Trends in Coatings Technology to Challenge Harsh Environments and to Open New Applications, Tsukuba, Japan, May 17?18, 2004, (ed. S. Kuroda), National Institute for Materials Science, Tsukuba, Japan, (2004), S. 8-9
• High Strain Rate Deformation Phenomena in Cold Spraying and Explosive Powder Compaction, T. Schmidt, F. Gärtner, H. Kreye: Proc. 1^st Tsukuba International (Japanese-German) Coatings Symposium: Recent Trends in Coatings Technology to Challenge Harsh Environments and to Open New Applications, Tsukuba, Japan, May 17?18, 2004, (ed. S. Kuroda), National Institute for Materials Science, Tsukuba, Japan, (2004) p. 12 – 13.
• Effect of Nb₂O₅ content on hydrogen reaction kinetics of Mg, Gagik Barkhordarian, Thomas Klassen, Rüdiger Bormann: Journal of Alloys and Compounds Volume 364, Issues 1–2, 11 February 2004, Pages 242–246

2003

• Thermal Stability of Nanocrystalline Nickel-18 at.{3728c0ddcf5026c65bc0b4e995c837d09025c3e7fa253cea254631dfe46bf841} Tungsten Alloy Investigated with the Tomographic Atom Probe, P. Choi, P.T. Al-Kassab, F. Gärtner, H. Kreye, R. Kirchheim: Materials Science and Engineering A ? Structural Materials, Properties, Microstructure and Processing 353, (2003), p. 74-79
• Influencia de Par?metros de Processo na Qualidade de Revestimentos de Aco X46Cr13 Aspergidos Termicamente, M.F.O. Schiefler, A.J.A. Buschinelli, F. Gärtner, A. Kirsten, J. Voyer, H. Kreye, Congresso Brasileiro de Engenharia de Fabricacao, 2nd COBEF, 18-21 May 2003, Uberlandia, Brasil, article COF03_0546, on CD
• Protection of Steel Components Against Marine Corrosion by Thermally Sprayed Anodic Coatings, M.F.O. Schiefler, F. Gärtner, J. Voyer, A. Kirsten, H. Kreye, A.J.A. Buschinelli, in: Thermal Spray 2003 ? Advancing the Science and Applying the Technology. B.R. Marple, C. Moreau, Eds., ASM International, Materials Park, OH, 2003, p. 361-370
• Numerical and Microstructural Investigations of the Bonding Mechanisms in Cold Spraying, F. Gärtner, C. Borchers, T. Stoltenhoff, H. Kreye, H. Assadi, in: Thermal Spray 2003 ? Advancing the Science and Applying the Technology. B.R. Marple, C. Moreau, Eds., ASM International, Materials Park, OH, 2003, p. 1-8
• High Strain Rate Deformation Phenomena in Explosive Powder Compaction and Cold Gas Spraying, T. Schmidt, F. Gärtner, H. Kreye, in: Thermal Spray 2003 ? Advancing the Science and Applying the Technology. B.R. Marple, C. Moreau, Eds., ASM International, Materials Park, OH, 2003, p. 9-18
• Development of Cold Gas Sprayed Coatings, J. Voyer, T. Stoltenhoff, H. Kreye, in: Thermal Spray 2003 ? Advancing the Science and Applying the Technology. B.R. Marple, C. Moreau, Eds., ASM International, Materials Park, OH, 2003, p. 71-78
• Tailoring Nanocrystalline Materials Towards Potential Applications, T. Klassen, R. Bohn, G. Fanta, W. Oelerich, N. Eigen, E. Aust, R. Bormann, F. Gärtner, H. Kreye: Z. Metallkd. 94 (2003), p. 610-614
• Microstructural and Macroscopic Properties of Cold Sprayed Copper Coatings, C. Borchers, F. Gärtner, T. Stoltenhoff, H. Assadi, H Kreye: Journal of Applied Physics, Bd. 93 (2003), 12, p. 10064-10070
• Bonding Mechanism in Cold Gas Spraying, H. Assadi, F. Gärtner, T. Stoltenhoff, H. Kreye: Acta Materialia, 51(2003), p. 4379-4394
• Determination of Cracking Resistance of Thermal Spray Coatings During 4-Point Bend Testing Using an Acoustic Emission Technique, J. Voyer, H. Kreye: Journal of Thermal Spray Technology, Vol. 12 (3), (2003), p. 416-426
• Hochgeschwindigkeits-Flammspritzen ? Stand der Technik, neue Entwicklungen und Alternativen, High Velocity Oxy-Fuel Flame Spraying ? State of the Art, new Developments and Alternatives, H. Kreye, F. Gärtner, H.J. Richter, in: Proc. 6. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2003, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany 2003, S. 5-17
• Methode und Einsatzpotenzial des Kaltgasspritzens, Method and Potential of the Cold Spray Process, J. Voyer, T. Stoltenhoff, T. Schmidt, H. Kreye, in: Proc. 6. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2003, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany 2003, S. 39-47
• Einsatz analytischer Verfahren zum Verständnis und zur Optimierung des Kaltgasspritzens, Application of Analytical Methods for Understanding and Optimization of the Cold Spray Process, H. Assadi, F. Gärtner, T. Stoltenhoff, H. Kreye, in: Proc. 6. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2003, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany 2003, S. 49-59
• Neue Herausforderungen für das Draht- und Stabflammspritzen, New Challenges for Wire and Rod Flame Spraying, F. Gärtner, J. Voyer, Xiumei Qi, H. Kreye, H.J. Richter, W. Krömmer, in: Proc. 6. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2003, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany 2003, S. 61-71
• Kaltgasspritzen ? Ein neues Beschichtungsverfahren zur Herstellung oxidarmer metallischer Schichten, H. Kreye, T. Schmidt, T. Stoltenhoff: Tagungsband 41. Jahrestagung der DGO, Bremen, September 2003, S. 160-163
• Production of Nanocrystalline Cermet Thermal Spray Powders for Wear Resistant Coatings by High-Energy Milling, N. Eigen, T. Klassen, E. Aust, R. Bormann, F. Gärtner, H. Kreye: Materials Science and Engineering A, Bd. 356 (2003), 1-2, p. 114-121
• Kaltgasspritzen an der Universität der Bundeswehr Hamburg, H. Kreye: GTS Strahl, Sonderheft zum 6. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding, November 2003
• Wear Behavior of Spray Coatings Based on Nanocrystalline Cermet Powders, T. Klassen, N. Eigen, X. Qi, F. Gärtner, E. Aust, R. Bormann, H. Kreye: Surface Engineering in Materials Science II, TMS Annual Meeting, March 2 – 6, 2003, San Diego, California, USA, eds. S. Seal, N.B. Dahotre, J. Moore, C. Suryanaryana, A. Agarwal, The Surface Engineering Committee of the MPMD of TMS, TSM Warrendale, Pennsylvania, USA, 99 ? 110
• Fast hydrogen sorption kinetics of nanocrystalline Mg using Nb₂O₅as catalyst, Gagik Barkhordarian, Thomas Klassen, Rüdiger Bormann: Scripta Materialia Volume 49, Issue 3, August 2003, Pages 213–217

2002

• Microstructures and Properties of Nanocrystalline Composite Coatings, F. Gärtner, C. Borchers, H. Kreye, N. Eigen, T. Klassen, R. Bormann, W. Krömmer, V. Borck, in: Proc. International Thermal Spray Conference ITSC 2002, E.F. Lugscheider, C.C. Berndt, Ed., DVS-Verlag, Düsseldorf, 2002, p. 102-106
• Cold Spraying ? State of the Art and Applicability, T. Stoltenhoff, J. Voyer, H. Kreye, in: Proc. International Thermal Spray Conference ITSC 2002, E.F. Lugscheider, C.C. Berndt, Ed., DVS-Verlag, Düsseldorf, 2002, p. 366-374
• Corrosion Behaviour of High Velocity Combustion Wire Sprayed Coatings, M.F.O. Schiefler, J. Voyer, F. Gärtner, X. Qi, in: Proc. International Thermal Spray Conference ITSC 2002, E.F. Lugscheider, C.C. Berndt, Ed., DVS-Verlag, Düsseldorf, 2002, p. 553-558
• Kaltgasspritzen ? ein Spritzverfahren für oxidarme metallische Schichten und Strukturen, T. Stoltenhoff, H. Kreye, in: Tagungsband Große Schweißtechnische Tagung, Kassel, 2002, S. 73-79
• An Analysis of the Cold Spray Process and its Coatings,T. Stoltenhoff, H. Kreye, H.J. Richter: Journal of Thermal Spray Technology, Vol. 11 (4), (2002), p. 542-550
• Electrochemical and Microstructural Investigation of Thermal Spray Coatings for the Steel Protection against Marine Corrosion, M.F.O. Schiefler, A.J.A. Buschinelli, F. Gärtner, J. Voyer, H. Kreye, 22^nd Congresso Brasileiro de Corros?o Promo??o: Abraco (22^nd CONBRASCORR), 19 ? 21 August 2002, Salvador, Brasil, article 060 on CD
• Advanced Alumina Composites Reinforced with Nb-Alloys, R. Günther, T. Klassen, B. Dickau, F. Gärtner, A. Bartels, R. Bormann: Adv. Eng. Mat. 4 (2002), 121-125

2001

• Optimization of the Cold Spray Process, T.Stoltenhoff, H. Kreye, H.J. Richter, H. Assadi, in: Thermal Spray 2001 – New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, E.F. Lugscheider, Ed., ASM International, Materials Park, OH, 2001, p. 409-416
• High Velocity Combustion Wire Spraying ? Systems and Coatings, H. Kreye, A. Kirsten, F. Gärtner, X. Qi, in: Thermal Spray 2001 – New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, E.F. Lugscheider, Ed., ASM International, Materials Park, OH, 2001, p. 461-466
• Mikrostruktur und Eigenschaften von thermisch gespritzten Aluminiumoxidschichten, J.-H. Müller, H. Kreye: Schweißen & Schneiden 53 (2001) S. 336-345
• Microstructure and Properties of Thermally Sprayed Alumina Coatings, J.-H. Müller, H. Kreye: Welding & Cutting 53 (2001) E. 122-126
• Advanced Alumina Composites Reinforced with Titanium Alloys, T. Klassen, B. Dickau, F. Gärtner, A. Bartels, R. Bormann: J. American Ceramic Soc. 84 (2001) 1509-1513
• Deformation Microstructure of Cold Sprayed Coatings Studied by Electron Microscopy, C. Borchers, T. Stoltenhoff, F. Gärtner, H. Kreye, H. Assadi: Mat. Res. Soc. Symp. Proc. 673 (2001) P7.10

1976 – 2000

• Elektronenmikroskopische Untersuchung zum Bindemechanismus beim Sprengplattieren, H. Kreye, I. Wittkamp, U. Richter: Z. Metallkunde 67 (1976) S. 141-147
• Rekristallisation mehrphasiger Werkstoffe, E. Hornbogen, H. Kreye, in: Grundlagen der Wärmebehandlung von Stahl, Verlag Stahleisen 1976, S. 143-154
• Metallkundliche Vorgänge beim Explosivschweißen, H. Kreye, in: Proc. III. Int. Conf. on Explosives, Marianske Lazne CSSR 1976, S. 107-115
• Über die Ursache der Rißbildung beim Spannungsarmglühen von geschweißten Feinkornbaustählen, H. Kreye, I. Olefjord, J. Löttgers: Archiv Eisenhüttenw. 48 (1977) S. 291-295
• Zielpräparation von Schweißnähten für die Durchstrahlungs-Elektronenmikroskopie, H. Kreye, I. Wittkamp: Prakt. Metallogr. 16 (1977) S. 125-139
• Melting Phenomena in Solid State Welding, H. Kreye: Welding Journal 56 (1977) 154s-158s
• Gefügeänderungen und Bindemechanismus beim Reibschweißen, H. Kreye, I. Wittkamp: Z. Metallkde 68 (1977) S. 253-259
• Elektronenmikroskopische Untersuchungen zum Bindemechanimus beim Kaltpreßschweißen, H. Kreye, K. Thomas: Schweißen und Schneiden 29 (1977) S. 249-252
• Mikrostruktur und Verformungsverhalten von Explosivplattierungen, H. Kreye, M. Hammerschmidt, in: Proc. VI. Int. Conf. on High Energy Rate Fabrication, Essen 1977, P. 2.11.1
• Anwendung der Rasterelektronenmikroskopie zur Charakterisierung von Werkstoffversprödungen in der wärmebeeinflußten Zone von Schweißverbindungen, U. Brenner, H. Kreye: DVM Bericht Berlin (1977) S. 79-85
• Gefüge und mechanische Eigenschaften der Legierung Kupfer-Nickel9-Zinn2, U. Gerlach, H. Kreye: Metall 32 (1978) S. 1112-1115
• Ultrasonic Welding of Metallic Alloy Glass to Copper, H. Kreye, M. Hammerschmidt, G. Reiners: Scripta Met. 12 (1978) p. 1059-1061
• Die Bindezone von Explosivplattierungen, M. Hammerschmidt, U. Richter: Proc. IV. Intern. Conf. on Explosive Working of Metals, Gottwaldov CSSR 1979, S. 104-121
• Schweißverhalten von metallischen Gläsern, M. Hammerschmidt, H. Kreye, B. Meinck: Metall 34 (1980) S. 23-27
• Versprödungserscheinungen in mikrolegierten Stählen und deren Einfluß auf das Schweißverhalten unter extremen Bedingungen, U. Brenner, H. Kreye, H. Baumgardt: Archiv Eisenhüttenw. 51 (1980) S. 393-398
• Schweißverfahren für metallische Gläser, H. Kreye, M. Hammerschmidt, in: Fügen von Keramik, Glas u. Metall, DVS-Bericht Bd 66 (1980) S. 23-28
• Microstructure and Bonding Mechanism in Explosive Welding, M. Hammerschmidt, H. Kreye, in: Shock Waves and High Strain-Rate Phenomena in Metals. Plenum Press, New York 1981, p. 961-973
• Microstructural Features Determining the Properties of Explosive Welds, M. Hammerschmidt, H. Kreye, in: High Energy Rate Fabrication, Applied Science Publ., Essex 1982, p. 60-70
• The Role of Adiabatic Shearing in Explosive Welding, M. Hammerschmidt, H. Kreye, in: Proc. 2. Intern. Meeting on Explosive Working of Materials; Novosibirsk USSR 1982, p. 117-125
• Verbindungsbildung beim Reibschweißen, H. Kreye: Berichtsband 2. Aachener Reibschweißkolloquium, Aachen 1982, S. 1-15
• The Mechanism of Pseudo-intercrystalline Brittleness of Precipitation-hardened Alloys and Tempered Steels,   E. Hornbogen, H. Kreye: Journ. Materials Science 17 (1982) S. 979-988
• Neuere Anwendungsmöglichkeiten für das Reibschweißen, H. Kreye: Werkstatt und Betrieb 115 (1982) S. 703-706
• Transmission Electron Microscope Investigation of the Microstructure Affected by the Bonding Process during Oblique Collision of Metallic Surfaces, H. Kreye, M. Hammerschmidt: Proc. V. Intern. Symp. on Use of Explosive Energy in Manufacturing Metallic Materials of New Properties, Gottwaldov CSSR 1982, p. 130-146
• Mikrostruktur und Eigenschaften von Explosivschweißungen, M. Hammerschmidt: Fortschr.-Ber. Reihe 2 Nr. 52, VDI-Verlag Düsseldorf 1983, S. 1-199
• Untersuchungen zum thermischen Spritzen von WC-Co mit dem Hypersonic Spray-Verfahren, H. Kreye, G. Bechtloff, H. Bick: Metall 37 (1983) S. 237-239
• Verbindungstechnik von metallischen Gläsern, H. Kreye: Festschr. Fachb. Maschinenbau, Universität der Bundeswehr Hamburg 1983, S. 67-74
• Anwendung eines Magnetkollimators zur Erhöhung der Nachweisempfindlichkeit bei der energiedispersiven Mikroanalyse im Rasterelektronenmikroskop, H.-H. Müller: DVM-Bericht Mikroskopie und Mikrobereichsanalyse in der Materialprüfung. Düsseldorf 1983, S. 59-63
• Particle Velocity in Hypersonic Flame Spraying of WC-Co, N. Wagner, K. Gnädig, H. Kreye, H. Kronewetter: Surface Technology 22 (1984) p. 61-71
• Herstellung von verschleißfesten WC-Co Schichten durch Hypersonic Flammspritzen, N. Wagner, H. Kreye, H. Kestel: Z. f. Werkstofftechnik 16 (1985) S. 55-60
• Über den Bindemechanismus beim Explosivschweißen, H. Kreye, M. Hammerschmidt, U. Granz, C.-P. Woidneck: Schweißen und Schneiden 37 (1985) S. 297-302
• Aufbau und thermische Stabilität von chemisch abgeschiedenen Nickel-Phosphor-Schichten, H. Kreye, H.-H. Müller, T. Petzel: Galvanotechnik 77 (1986) S. 561-567
• Abhängigkeit der Eigenspannungen von der Mikrostruktur in galvanisch abgeschiedenen Nickelschichten, H.-H. Müller, H. Kreye, in: Galvanoformung, E.G. Leuze Verlag, Saulgau 1986, S. 117-123 und Galvanotechnik 78 (1987) S. 1596-1601
• On the Weldability of Mechanically Alloyed Aluminium, H. Kreye, G. Reiners, M. Schubert, G.-E. Löhmer, in: Horizons of Powder Metallurgy, Vol. 2, W.A. Kaysser, W.J. Huppmann, Eds., Verlag Schmid GmbH, Freiburg 1986, p. 707-711
• Microstructure and Bond Strength of WC-Co Coatings Deposited by Hypersonic Flame Spraying (Jet Kote Process), H. Kreye, D. Fandrich, H.-H. Müller, G. Reiners, in: Advances in Thermal Spraying, Pergamon Press, New York 1986, p. 121-128
• Mikrostruktur und mechanische Eigenschaften von Aluminium-Kupfer Reibschweiß-verbindungen, H. Kreye, G. Reiners: Z. Metallkde 77 (1986) S. 708-713
• Werkstoffprüfung an dünnen Schichten – galvanisch abgeschiedene Schichten und thermische Spritzschichten, H.-H. Müller, H. Kreye, in: Werkstoffsprüfung ’86, Deutscher Verband für Materialprüfung, Berlin 1986, S. 201-213
• Metallurgical Aspects and Application of Friction Welding, H. Kreye, G. Reiners, in: Advances in Welding Science and Technology; S.A. David, Ed., ASM Intern. Publ., Metals Park Ohio 1986, p. 307-310
• Verbindung von Kupferkabeln mit Stahlteilen durch Reibschweißen, H. Kreye, G. Reiners: Metall 41 (1987) S. 400-402
• Über die Mikrostruktur und die Eigenschaften von galvanisch abgeschiedenen Nickelschichten, H.-H. Müller: Fortschritt Berichte Reihe 5 Nr. 115, VDI-Verlag Düsseldorf 1987, S. 1-123
• Werkstoffkundliche Aspekte beim Reibschweißen von Werkstoffkombinationen, H. Kreye, G. Reiners, in: Berichtsband 2. Sondertagung Abbrennstumpf- und Reibschweißen, Aachen 1987, S. 175-186
• Verschleißfeste Oberflächenschichten durch Hochgeschwindigkeits-Flammspritzen (Jet Kote Verfahren), H. Kreye, W. Volk, in: Berichtsband der Jahrestagung der Deutschen Gesellschaft für Galvano- und Oberflächentechnik, Konstanz 1987, S. 56-59
• Die Bedeutung der Abscheideparameter für die Mikrostruktur und die Eigenschaften von galvanischen Nickelschichten, H.-H. Müller, H. Kreye, in: Berichtsband der Jahrestagung der Deutschen Gesellschaft für Galvano- und Oberflächentechnik, Konstanz 1987, S. 39-42
• Gefüge und Eigenschaften von Kupfer-Stahl Reibschweißverbindungen, H. Kreye, G. Reiners: Schweißen und Schneiden 40 (1988) S. 32-36
• Mikrostruktur und mechanische Eigenschaften von Reibschweißverbindungen aus Aluminium und Stahl, G. Reiners, H. Kreye: Schweißen und Schneiden 40 (1988) S. 123-129
• Jet Kote Spraying with Different Fuel Gases, H. Kreye, P. Heinrich, G. Loewe, in: Proc. Intern. Symp. on Advanced Thermal Spraying Technology and Allied Coatings, Osaka Japan 1988, p. 73-78
• Mikrostruktur, Haftfestigkeit und elektrische Leitfähigkeit von galvanischen Silber- schichten auf Niob, G. Reiners, H. Kreye, C. Brauner, D. Renken, J. Susta, H. Mix: Galvanotechnik 79 (1988) S. 2862-2868
• Methoden zur Sicherung und Beurteilung des Korrosionsschutzes durch chemisch abgeschiedene Nickel-Phosphor-Schichten, H.-G. Schenzel, H. Kreye, in: Berichtsband der Jahrestagung der Deutschen Gesellschaft für Galvano- und Oberflächentechnik, Goslar 1988, S. 8-11
• Erhöhung der Korrosionsbeständigkeit von chemisch abgeschiedenen Nickel-Phosphor-Schichten, H.-G. Schenzel, H. Kreye, in: Stromlose Beschichtung von Metall, Kunststoff, Glas und Keramik. 10. Ulmer Gespräch, Eugen G. Leuze Verlag, Saulgau 1988, S. 113-117
• Erhöhung der Korrosionsbeständigkeit von chemisch abgeschiedenen Nickel-Phosphor-Schichten, H.-G. Schenzel, H. Kreye: Galvanotechnik 81 (1990) S. 1655-1658
• Das Reibschweißen – Werkstoffkundliche Besonderheiten, H. Kreye: Drahtwelt 74 (1988) H6, 20-23
• Friction Welding – Specific Materials and Applications, H. Kreye: Wireworld 39 (1988) H6, 24-27
• Kristallisation und Rekristallisation in Nickel-Phosphor-Schichten, H.-G. Schenzel, H. Kreye, in: Berichtsband der Jahrestagung der Deutschen Gesellschaft für Galvano- und Oberflächentechnik, Innsbruck 1989, S. 8-11
• Characteristics of Coatings Produced by High Velocity Flame Spraying, H. Kreye, in: Proc. 12th Intern. Thermal Spray Conf. ITSC, London 1989, P.24, 1-9
• Optimization and Control of the Spraying Conditions in the Jet Kote Process, H. Kreye, in: Proc. 2nd Intern. Thermal Spray Conference, American Society for Metals, Cincinnati USA 1989 p. 39-45
• How to Improve the Corrosion Resistance of Electroless Nickel-Phosphorus Coatings, H.-G. Schenzel, H. Kreye, in: Proc. SUR/FIN ’89, K 1-9, American Electroplaters and Surface Finishers Society, Cleveland USA 1989
• Improved Corrosion Resistance of Electroless Nickel-Phosphorus Coatings, H.-G. Schenzel, H. Kreye: Plating and Surface Finishing 77, 10 (1990) p. 50-54
• Hochgeschwindigkeits-Flammspritzen – Neue Beschichtungsverfahren für den Verschleiß- und Korrosionsschutz, H. Kreye, in: Oberflächentechnik (Proc. SURTEC ’89, Berlin), C. Hanser Verlag München 1989, S. 653-660
• Elektrolytisch abgeschiedene Nickel-Phosphor-Schichten – Aufbau und Eigenschaften, H. Kreye, H.-G. Schenzel, J.C. Puippe, J. Vanhumbeeck, G. Ide: Metalloberfläche 44 (1990) S. 63-66
• Mikrostruktur und Korrosionsverhalten von chemisch abgeschiedenen Nickel-Phosphor-Schichten, H.-G. Schenzel: Fortschritt-Berichte VDI, Reihe 5 Nr. 196, VDI-Verlag Düsseldorf 1990, S. 1-141
• Stand der Entwicklung und Perspektiven des Hochgeschwindigkeits-Flammspritzen, H. Kreye, P. Heinrich: Schweißen und Schneiden 42 (1990) S. 382-385; Intern. Weld. Engineering 3 (1991) p. 16-19
• Galvanoformen im Mikrobereich – Untersuchung der Möglichkeiten und Grenzen am Beispiel der Herstellung von holografischen Prägematrizen, H. Kreye, T. Ahlhorn: Dünnschichttechnologien ’90, Bd. 1, VDI-Verlag Düsseldorf 1990, S. 405-411
• Verfahren zur Herstellung von holografischen Prägematrizen, T. Ahlhorn, H. Kreye, in: Jahrbuch Oberflächentechnik Bd. 47, Metall-Verlag Berlin 1991, S. 376-381
• Chemisch Nickel – Optimierung und Überwachung der Abscheidebedingungen, S. Frormann, H. Kreye, H.-G. Schenzel: Metalloberfläche 45 (1991) S. 157-161
• High Velocity Flame Spraying of Chromium Oxide and Aluminum Oxide, H. Kreye, U. Granz-Schnibbe: Thermal Spray Research and Applications, ASM International Ed., Materials Park Ohio USA, 1991, p. 575-580
• High Velocity Flame Spraying – Process and Coating Characteristics, H. Kreye: Proc. 2nd Plasma-Technik-Symposium, Luzern 1991, p. 39-47
• Möglichkeiten der Herstellung von Verschleißschutzschichten durch thermisches Spritzen, H. Kreye, R. Neiser: Oberflächentechnik und Tribologie, 13. Ulmer Gespräch, Eugen G. Leuze Verlag, Saulgau 1991, S. 42-49
• Möglichkeiten der Herstellung von Verschleißschutzschichten durch thermisches Spritzen, H. Kreye, R. Neiser:  Galvanotechnik 83 (1992) S. 2592-2599
• Wear and Corrosion Resistant Coatings by High Velocity Flame Spraying, H. Kreye, P. Heinrich, in: Proc. Eurocorr ’91, Budapest 1991, p. 495-500
• Widerstandsschweißen von metallischen Gläsern, F. Szigeti, H. Kreye: Schweißen und Schneiden 44 (1992) S. 13-17
• Galvanoformen im Mikrobereich, H. Kreye, T. Ahlhorn:  Dünnschichttechnologie ’92, VDI-Verlag Düsseldorf 1992, S. 345-353
• High Velocity Oxy-Fuel Flame Spraying of Molybdenum,   H. Kreye, D. Blume:  Thermal Spraying – International Advances in Coating Technology, ASM International, Materials Park USA, 1992, p. 177-180
• Galvanoformen im Mikrobereich – Untersuchung der Möglichkeiten und Grenzen am Beispiel der Herstellung von holografischen Prägematrizen, H. Kreye, T. Ahlhorn:  BMFT-Verbundprojekt 13 N 5537, Abschlußbericht
• Microstructure and Properties of Electroless Nickel Coatings with Phosphorus Contents from 2 to 12 Percent, H. Kreye:  Proc. Intern. Congr. for Surface Finishing, Sao Paulo Brasilien 1992, Vol. 1, p. 146-155
• Zur elektrolytischen Abscheidung auf feinstrukturierten Oberflächen, T. Ahlhorn, J. Lewisch, H. Kreye:  Galvanotechnik 83 (1992) S. 3712-3717
• Transferring Relief Holograms formed in Silver Halide Emulsions into Nickel Foils for Embossing, T. Ahlhorn, K. Gnädig, H. Kreye:  Proc. American Electroplaters and Surface Finishers Society SUR/FIN ’93, Anaheim 1993, p. 623-530
• Mikrostruktur und Verschleißbeständigkeit von Nickel-Phosphor-Schichten mit niedrigem Phosphorgehalt, H. Kreye, R. Gutmann:  Metalloberfläche 47 (1993) S. 378-391
• Herstellung von nanokristallinen Nickel-Phosphor-Legierungen durch außenstrom-lose Metallabscheidung, H. Kreye, F. Müller:  DFG-Vorhaben Kr 1109, Abschlußbericht, 1994
• Elektrolytische Abformung mikrostrukturierter Oberflächen, T. Ahlhorn: Fortschritt-Berichte VDI, Reihe 2 Nr. 312, VDI-Verlag Düsseldorf 1994, S. 1-96
• Proteção Contra Desgaste por Revistemento con Ligas Autofluxantes de NiCrBSi, H. Kreye, F. Szigeti, A. Buschinelli: Proc. XIX E.N.T.S. Ass. Bras. de Soldagem, Brasil 1993, 547-564, H. Kreye, F. Szigeti, A. Buschinelli: Revista Soldagem e Materiais, ABS Vol. 6,3, 1994
• Werkstoffkundliche Aspekte des Hochgeschwindigkeits-Flammspritzens, H. Kreye:  3. Kolloquium zum Hochgeschwindigkeits-Flammspritzen, Ingolstadt 1994, S. 1-8
• Struktur und Umwandlungsverhalten von nanokristallinen Nickel-Phosphor-Legierungen, H. Kreye, F. Müller, K. Lang, D. Isheim, T. Hentschel: Z. Metallkunde 86 (1995) S. 184-189
• Removal of Thermal Spray Coatings by High-Pressure Water Jets, H. Kreye, T. Ahlhorn, J. Niebergall, R. Schwetzke: Proc. Intern. Thermal Spray Conf. ITSC’95, High Temp. Soc. Japan, (1995) p. 127-131
• The Role of the Fuel Gas in the HVOF Process, H. Kreye, S. Zimmermann, P. Heinrich: Proc. Intern. Thermal Spray Conf. ITSC’95, High Temp. Soc. Japan, (1995) p. 393-398
• Elektrolytisch abgeschiedene Nickelschichten – Einfluß des Schwefelgehalts auf Härte und Duktilität, H. Kreye, K. Lang: Metalloberfläche 49 (1995) S. 584-587
• HVOF and Plasma Sprayed Molybdenum Coatings – Microstructure and Properties, S. Zimmermann, H. Kreye: Proc. 8th Natl. Thermal Spray Conf. NTSC ’95, ASM International USA, (1995) p. 297-301
• Beschichten und Fügen, H. Kreye: Technische Rundschau 46 (1995) S. 24-27
• Herstellung, Mikrostruktur und Eigenschaften von außenstromlos abgeschiedenen Nickel-Phosphor-Schichten mit nanokristallinem Aufbau, F. Müller: Fortschritt-Berichte VDI, Reihe 5 Nr. 427, VDI-Verlag Düsseldorf 1996, S. 1-135
• Zum Einfluß des Brenngases auf Mikrostruktur und Eigenschaften von HVOF-Schichten, H. Kreye, R. Schwetzke, S. Zimmermann, P. Heinrich, W. Krömmer: DVS-Bericht Düsseldorf, Bd. 175 (1996) S. 95-98
• Hochgeschwindigkeits-Flammspritzen von Molybdän, S. Zimmermann, H. Kreye: DVS-Bericht Düsseldorf, Bd. 175 (1996) S. 336-340
• Hochgeschwindigkeits-Flammspritzen von Molybdän, S. Zimmermann, H. Kreye: Schweißen und Schneiden 48 (1996) S. 108-115
• Hochgeschwindigkeits-Flammspritzen von Molybdänschichten, H. Kreye: AIF-Vorhaben Nr. 9317, Abschlußbericht 1996
• Chromium Carbide Coatings Produced with Various HVOF Spray Systems, S. Zimmermann, H. Kreye, in: Proc. 9th Natl. Thermal Spray Conf. NTSC ’96, ASM International USA, (1996) p. 147-152
• Cavitation Erosion of HVOF Coatings, R. Schwetzke, H. Kreye, in: Proc. 9th Natl. Thermal Spray Conf. NTSC ’96, ASM International USA, (1996) p. 153-158
• High Velocity Oxy-Fuel Flame Spraying – Process and Coating Characteristics, H. Kreye, R. Schwetzke, S. Zimmermann, in: Proc. 9th Natl. Thermal Spray Conf. NTSC ’96, ASM International USA, (1996) p. 451-456
• Hochgeschwindigkeits-Flammspritzen von Molybdän, S. Zimmermann: Fortschritt-Berichte VDI, Reihe 5 Nr. 488, VDI-Verlag Düsseldorf 1997, S. 1-127
• Hochgeschwindigkeits-Flammspritzen als Alternative zum Hartverchromen, H. Kreye, R. Schwetzke: Berichte DGO-Jahrestagung 1997, S. 45-47
• Schweißen und Löten von elektrolytisch abgeschiedenem Nickel, H. Kreye, P. Hansen, R. Schwetzke, U. Wagener: Berichte DGO-Jahrestagung 1997, S. 75-77
• Vergleich der HVOF-Systeme – Werkstoffverhalten und Schichteigenschaften, A Comparison of HVOF Systems – Behaviour of Materials and Coating Properties, H. Kreye: Proc. 4. Kolloquium zum Hochgeschwindigkeits-Flammspritzen, GTS 1997, S. 13-21
• Hochgeschwindigkeits-Flammspritzen ermöglicht neue Anwendungen, H. Kreye: JOT Journal für Oberflächentechnik, April 1998, S. 102-108
• A Comparison of HVOF Systems – Behavior of Materials and Coating Properties, H. Kreye: Galvanotechnik 89 (1998) S. 3006-3013
• Vergleich der Hochgeschwindigkeits-Flammspritz-Systeme im Hinblick auf Werkstoffverhalten und Schichteigenschaften, H. Kreye: DVS Jahrbuch Schweißtechnik ’99, S. 177-186
• Möglichkeiten zur Beurteilung und Optimierung von Schichteigenschaften, Techniques for the Evaluation and Optimization of Coating Properties, R. Schwetzke, W. Krömmer: Proc. 4. Kolloquium zum Hochgeschwindigkeits-Flammspritzen, GTS 1997, S. 22-33
• Möglichkeiten zur Beurteilung und Optimierung von Schichteigenschaften, R. Schwetzke, W. Krömmer: Galvanotechnik 90 (1999) S. 778-788
• Microstructure and Properties of Tungsten Carbide Coatings Sprayed with Various HVOF-Spray Systems, R. Schwetzke, H. Kreye, in: Thermal Spray – Meeting the Challenges of the 21st Century, C. Coddet, Ed., ASM International, Materials Park, OH, 1998, p. 187-192
• Microstructure and Properties of Tungsten Carbide Coatings Sprayed with Various HVOF-Spray Systems, R. Schwetzke, H. Kreye: Journal of Thermal Spray Technology Vol. 8(3) (1999) p. 433-439
• Cavitation Erosion Resistant Coatings produced by Thermal Spraying and by Weld Cladding, H. Kreye, R. Schwetzke, A. Buschinelli, L. Boccanera, in: Thermal Spray – Meeting the Challenges of the 21st Century, C. Coddet, Ed., ASM International, Materials Park, OH, 1998, p. 269-273
• Properties and Characterization of Thermal Spray Coatings, G. Reiners, H. Kreye, R. Schwetzke, in: Thermal Spray – Meeting the Challenges of the 21st Century, C. Coddet, Ed., ASM International, Materials Park, OH, 1998, p. 629-634
• Mikrostruktur und Eigenschaften von elektrolytisch abgeschiedenen Nickel-Wolfram-Schichten, F. Gärtner, B. Junk, H. Kreye: Galvanotechnik 90 (1999) S. 996-1000
• Neue Verfahren zur Herstellung funktioneller Schichten durch thermisches Spritzen, H. Kreye: Proc. Werkstoffwoche 19, Bd 9 Oberflächentechnik, Hrsg. H. Dimigen u. W. Paatsch, Wiley-VCH-Verlag, Weinheim 1999, S. 169-177
• Neue Entwicklungen beim thermischen Spritzen – Systeme, Spritzwerkstoffe und Anwendungen, H. Kreye, A. Kirsten, R. Schwetzke, in: Proc. of the United Thermal Spray Conference 1999, Düsseldorf, Hrsg. E. Lugscheider, P.A. Kammer, DVS-Verlag, Düsseldorf 1999, S. 90-94
• Processing and Properties of Intermetallic/Ceramic Composites with Interpenetrating Microstructure, T. Klassen, R. Günther, B. Dickau, F. Gärtner, A. Bartels, R. Bormann, H. Mecking: Journal of American Ceramic Soc., Vol 81,9 (1998) p. 2504-2506
• Mechanical Properties of Intermetallic/Ceramic Composites Prepared by High Energy Milling, R. Bohn, G. Fanta, R. Guenther, B. Dickau, T. Klassen, F. Gärtner, A. Bartels, R. Bormann: Proc. of the International Symposium on Metastable, Mechanical Alloyed and Nanocrystalline Materials, ISMANAM ’98 in Wollongong, Australia, A. Calka, D. Wexler, Eds., Materials Science Forum, Vol. 312 (1999) p. 575-580
• Thermisch gespritzte Verschleißschutzschichten, A. Kirsten, H. Kreye, R. Schwetzke: Freiberger Forschungsforum ’99 in Freiberg, Juni 1999, Freiberger Forschungshefte B 297, S. 103-110
• Hochgeschwindigkeits-Flammspritzen von wolframcarbidhaltigen Hartmetallschichten, R. Schwetzke, H. Kreye: Schweißen und Schneiden 52 (2000) S. 70-79
• High Velocity Oxy-Fuel Spraying of Tungsten Carbide-based Coatings, R. Schwetzke, H. Kreye: Welding and Cutting 52 (2000) E 29 – E 34
• Nanocrystalline Composites for Thermal Spray Applications, F. Gärtner, R. Bormann, T. Klassen, H. Kreye, N. Mitra: Proc. of the International Conference on Metastable, Mechanical Alloyed and Nanocrystalline Materials, ISMANAM ’99 in Dresden, Germany, J. Eckert, H. Schlörb, L. Schultz, Eds., Materials Science Forum, Vols. 343-346 (2000) p. 933-940
• Cold Spraying – A Study of Process and Coating Characteristics, H. Kreye, T. Stoltenhoff, in: Thermal Spray – Surface Engineering via Applied Research, C.C. Berndt, Ed., ASM International, Materials Park, OH, 2000, p. 419-422
• Oxidation of Stainless Steel in the High Velocity Oxy-Fuel Process, K. Dobler, H. Kreye, R. Schwetzke: Journal of Thermal Spray Technology, Vol 9(3) (2000) p. 407-413
• The Effect of Oxidation on Microstructure and Properties of TiC-based Cermet Coatings,         F. Gärtner, H. Kreye, V. Borck, W. Krömmer, in: Thermal Spray – Surface Engineering via Applied Research, C.C. Berndt, Ed., ASM International, Materials Park, OH, 2000, p. 463-469
• Nanocrystalline Ni – 3,6 at{3728c0ddcf5026c65bc0b4e995c837d09025c3e7fa253cea254631dfe46bf841} P and its Transformation Sequence Studied by Atom-Probe Field-Ion Microscopy, Th. Hentschel, D. Isheim, R. Kirchheim, F. Müller, H. Kreye: Acta mater. 48 (2000) p. 933-941
• Titanium Carbide Based Cermets for Thermal Spray Application, F. Gärtner, H. Kreye, R. Bormann, T. Klassen, in: Proc. Intern. Congr. on Advanced Materials and Processes, Euromat ’99 München, Vol 11, Wiley-VCH Weinheim, (2000) p. 88-93
• Preparation and Properties of Novel Nb- and Ti-based Metal Reinforces Alumina Composites with Interpenetrating Microstructure, R. Günther, R. Klassen, B. Dickau, F. Gärtner, A. Bartels, R. Bormann, in: Proc. Intern. Congr. on Advanced Materials and Processes, Euromat ’99 München, Vol 12, Wiley-VCH Weinheim (2000) p. 213-218
• Potential Applications for Nanocrystalline Materials, T. Klassen, R. Bohn, G. Fanta, W. Oelerich, R. Günther, N. Eigen, E. Aust, R. Bor­mann, F. Gärtner, H. Kreye: Materials Week 2000-Proceedings, Werkstoffwoche-Partnerschaft Frankfurt 2000, URL: www.materialsweek.org/proceedings
• Hochgeschwindigkeits-Flammspritzen – Stand der Technik, Perspektiven und Alter­nativen, High Velocity Oxy-Fuel Flame Spraying – State of the Art, Prospects and Alternatives, H. Kreye, F. Gärtner, A. Kirsten, R. Schwetzke, in: Proc. 5. Kolloquium Hoch­geschwindigkeits-Flammspritzen, Erding 2000, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany,(2000), S. 5-19
• Kaltgasspritzen – vom thermischen Spritzen zum kinetischen Spritzen, Cold Spraying – from Thermal Spraying to High Kinetic Energy Spraying, T. Stoltenhoff, H. Kreye, W. Krömmer, H.J. Richter, in: Proc. 5. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2000, Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany, (2000), S. 29-38

Open Access

• From Particle Acceleration to Impact and Bonding in Cold Spraying, T. Schmidt, H. Assadi, F. Gärtner, H. Richter, T. Stoltenhoff, H. Kreye, T. Klassen; Journal of Thermal Spray Technology, Vol. 18, Issue 5 (2009),  p. 794-808
• The Thermal Spray Roadmap, Armelle Vardelle, Christian Moreau, Jun Akedo, Hossein Ashrafizadeh, Christopher C. Berndt, Jörg Oberste Berghaus, Maher Boulos, Jeffrey Brogan, Athanasios C. Bourtsalas, Ali Dolatabadi, Mitchell Dorfman, Timothy J. Eden, Pierre Fauchais, Gary Fisher, Frank Gaertner, Journal of Thermal Spray Technology, December 2016, Volume 25, Issue 8, pp 1376–1440
• Influence of thermal properties and temperature of substrates on the quality of cold-sprayed deposits,  AM13502, Acta Materialia, Hamid Assadi, Z. Arabgol, M. Villa Vidaller, F. Gärtner, T. Klassen, 31-Jan-2017,  10.1016/j.actamat.2017.01.040

Kaltgasspritzen

• Cold Spraying – A Study of Process and Coating Characteristics, H. Kreye, T. Stoltenhoff, in: Thermal Spray – Surface Engineering via Applied Research, C.C. Berndt, Ed., ASM International, Materials Park, OH, 2000, p. 419-422
• Kaltgasspritzen – vom thermischen Spritzen zum kinetischen Spritzen, Cold Spraying – from Thermal Spraying to High Kinetic Energy Spraying, T. Stoltenhoff, H. Kreye, W. Krömmer, H.J. Richter, in: Proc. 5. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2000, Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany, (2000), S. 29-38
• Optimization of the Cold Spray Process, T.Stoltenhoff, H. Kreye, H.J. Richter, H. Assadi, in: Thermal Spray 2001 – New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, E.F. Lugscheider, Ed., ASM International, Materials Park, OH, 2001, p. 409-416
• Deformation Microstructure of Cold Sprayed Coatings Studied by Electron Microscopy, C. Borchers, T. Stoltenhoff, F. Gärtner, H. Kreye, H. Assadi: Mat. Res. Soc. Symp. Proc. 673 (2001) P7.10
• Cold Spraying – State of the Art and Applicability, T. Stoltenhoff, J. Voyer, H. Kreye, in: Proc. International Thermal Spray Conference ITSC 2002, E.F. Lugscheider, C.C. Berndt, Ed., DVS-Verlag, Düsseldorf, 2002, p. 366-374
• Kaltgasspritzen – ein Spritzverfahren für oxidarme metallische Schichten und Strukturen, T. Stoltenhoff, H. Kreye, in: Tagungsband Große Schweißtechnische Tagung, Kassel 2002, S. 73-79
• An Analysis of the Cold Spray Process and Its Coatings, T. Stoltenhoff, H. Kreye, H.J. Richter: Journal of Thermal Spray Technology, Vol. 11 (4), (2002), p. 542-550,
• Numerical and Microstructural Investigations of the Bonding Mechanisms in Cold Spraying, F. Gärtner, C. Borchers, T. Stoltenhoff, H. Kreye, H. Assadi, in: Thermal Spray 2003 – Advancing the Science and Applying the Technology. B.R. Marple, C. Moreau, Eds., ASM International, Materials Park, OH, 2003, p. 1-8
• High Strain Rate Deformation Phenomena in Explosive Powder Compaction and Cold Gas Spraying, T. Schmidt, F. Gärtner, H. Kreye, in: Thermal Spray 2003 – Advancing the Science and Applying the Technology. B.R. Marple, C. Moreau, Eds., ASM International, Materials Park, OH, 2003, p. 9-18
• Development of Cold Gas Sprayed Coatings, J. Voyer, T. Stoltenhoff, H. Kreye, in: Thermal Spray 2003 – Advancing the Science and Applying the Technology. B.R. Marple, C. Moreau, Eds., ASM International, Materials Park, OH, 2003, p. 71-78
• Microstructural and macroscopic properties of cold sprayed copper coatings, C. Borchers, F. Gärtner, T. Stoltenhoff, H. Assadi, H Kreye: Journal of Applied Physics, Bd. 93 (2003), 12, p. 10064-10070,
• Bonding mechanism in cold gas spraying, H. Assadi, F. Gärtner, T. Stoltenhoff, H. Kreye: Acta Materialia, 51(2003), p. 4379-4394,
• Methode und Einsatzpotenzial des Kaltgasspritzens / Method and Potential of the Cold Spray Process, J. Voyer, T. Stoltenhoff, T. Schmidt, H. Kreye, in: Proc. 6. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2003, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany 2003, S. 39-47
• Einsatz analytischer Verfahren zum Verständnis und zur Optimierung des Kaltgasspritzens, Application of Analytical Methods for Understanding and Optimization of the Cold Spray Process, H. Assadi, F. Gärtner, T. Stoltenhoff, H. Kreye, in: Proc. 6. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2003, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany 2003, S. 49-59
• Kaltgasspritzen – Ein neues Beschichtungsverfahren zur Herstellung oxidarmer metallischer Schichten, H. Kreye, T. Schmidt, T. Stoltenhoff: Tagungsband 41. Jahrestagung der DGO, Bremen, September 2003, S. 160-163
• Kaltgasspritzen an der Universität der Bundeswehr Hamburg, H. Kreye: GTS Strahl, Sonderheft zum 6. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding, November 2003
• Kaltgasspritzen von Kupfer – Eine strömungsmechanische und werkstoffkundliche Analyse und Optimierung des Spritzprozesses, T. Stoltenhoff: Dissertation Oktober 2003, Hamburg, Shaker Verlag 2004, Aachen. ISBN 3-8322-2302-9
• Microstructural bonding features of cold sprayed face centered cubic metals, C. Borchers, F. Gärtner, T. Stoltenhoff, H. Kreye: Journal of Applied Physics, Vol. 96 (2004), No. 8, p. 4288-4292
• Process Analysis and Bonding Mechanism of Cold Spraying, F. Gärtner, T. Schmidt, H. Assadi, T. Stoltenhoff, H. Kreye: Proc. 1st Tsukuba International (Japanese-German) Coatings Symposium: Recent Trends in Coatings Technology to Challenge Harsh Environments and to Open New Applications, Tsukuba, Japan, May 17–18, 2004, (ed. S. Kuroda), National Institute for Materials Science, Tsukuba, Japan, (2004), S. 8-9
• High Strain Rate Deformation Phenomena in Cold Spraying and Explosive Powder Compaction, T. Schmidt, F. Gärtner, H. Kreye: Proc. 1st Tsukuba International (Japanese-German) Coatings Symposium: Recent Trends in Coatings Technology to Challenge Harsh Environments and to Open New Applications, Tsukuba, Japan, May 17–18, 2004, (ed. S. Kuroda), National Institute for Materials Science, Tsukuba, Japan, (2004) p. 12 – 13.
• Formation of persistent dislocation loops by ultra-high strain-rate deformation during cold spraying, C. Borchers, F. Gärtner, T. Stoltenhoff, H. Kreye: Acta Materialia 53, (2005), p. 2991-3000
• High Velocity Impact Phenomena and Coating Quality in Cold Spraying, T. Schmidt, F. Gärtner, H. Assadi, T. Stoltenhoff, H. Kreye: Proc. International Thermal Spray Conference ITSC 2005, May 2005, Basel, Switzerland, E.F. Lugscheider, Ed., DVS-Verlag, Düsseldorf, 2005, p. 232-238
• The Cold Spray Process and its Potential for Industrial Applications, F. Gärtner, T. Stoltenhoff, T. Schmidt, H. Kreye: Proc. International Thermal Spray Conference ITSC 2005, May 2005, Basel, Switzerland, E.F. Lugscheider, Ed., DVS-Verlag, Düsseldorf, 2005, p. 158-163
• Schichten und Strukturen durch Kaltgasspritzen, H. Kreye, F. Gärtner, T. Schmidt, T. Stoltenhoff, H.J. Richter, H. Assadi: Uniforschung (2005), S. 27-31
• Development of a Generalized Parameter Window for Cold Spray Deposition, T. Schmidt, F. Gärtner, H. Assadi, H. Kreye: Acta Materialia 54 (2006), p. 729-742, doi:10.1016/j.actamat.2005.10.005
• Bonding Mechanisms and Applications of Cold Spraying, F. Gärtner, H. Assadi, H. Kreye, T. Schmidt, T. Stoltenhoff: Proc. SMT 18, 18th International Conference on Surface Modification Technologies, Dijon, November 15th–17th 2004, France, in press
• Microstructures and Key Properties of Cold-sprayed and Thermally Sprayed Copper Coatings, T. Stoltenhoff, C. Borchers, F. Gärtner, H. Kreye: submitted to Surface Coating Technology, November 2004, in press, doi:10.1016/j.surfcoat.2005.05.011
• Mechanical Properties of Cold Sprayed and Thermally Sprayed Copper Coatings, F. Gärtner, T. Stoltenhoff, J. Voyer, H. Kreye, S. Riekehr, M. Koçak, submitted to Surface and Coatings Technology, August 2005.
• Recent Developments and Potential Applications of Cold Spraying, F. Gärtner, R. Schmidt, T. Stoltenhoff, H. Kreye: submitted to Advanced Engineering Materials, November 2005
• New Developments in Cold Spray Based on Higher Gas- and Particle Temperatures, T. Schmidt, F. Gärtner, H. Kreye: submitted for Proc. International Thermal Spray Conference 2006
• The Cold Spray Process and its Optimization, H. Kreye, T. Schmidt, F. Gärtner, T. Stoltenhoff: submitted for Proc. International Thermal Spray Conference 2006
• Impact Conditions and Bonding in Cold Spraying, T. Schmidt, F. Gärtner, H. Assadi, H. Kreye: submitted to J. Thermal Spray Technology, December 2005
• The Cold Spray Process and its Potential for Industrial Applications, F. Gärtner, T. Stoltenhoff, T. Schmidt, H. Kreye: submitted to J. Thermal Spray Technology, December 2005

Prof. Dr.–Ing. Thomas Klassen

• XTEM-Analyse der Veränderungen in nickelimplantiertem Silizium durch Tempern, T. Klassen, J.K.N. Lindner, E.H. te Kaat,   Jahresberichte DTL 15 (1988), 72
• Einfluß der Temperparameter bei der Hochenergieionenstrahlsynthese vergrabener NiSi₂-Schichten in Silizium, T. Klassen, J.K.N. Lindner, E.H. te Kaat,  Jahresberichte DTL 16 (1989), 60
• Ion beam synthesis of deep buried layers in silicon by 6 MeV Ni implantation, J.K.N. Lindner, T. Klassen, E.H. te Kaat,  Nucl. Instr. and Meth. B59/60 (1991), 655
• Competition between Stable and Metastable Phases during Mechanical Alloying and Ball Milling, M. Oehring, Z.H. Yan, T. Klassen, R. Bormann, Phys. stat. sol. (a) 131 (1992), 671
• Inverse Melting in the Ti-Cr System, Z.H. Yan, T. Klassen, C. Michaelsen, M. Oehring, R. Bormann, Phys. Rev. B47 (1993), 8520
• Ti-Al Alloys Prepared by Ball Milling and Hot Isostatic Pressing, M. Oehring, T. Klassen, R. Bormann, in: High-Temperature Intermetallic Alloys V., ed. by I. Baker, J. D. Whittenberger, R. Darolia, M.H. Yoo, (MRS, Pittsburgh, Pennsylvania), Mater. Res. Soc. Symp. Proc. 288 (1993), 873
• The Formation of Metastable Ti-Al Solid Solutions by Mechanical Alloying and Ball Milling, M. Oehring, T. Klassen, R. Bormann, J. Mater. Res. 8 (1993), 2819
• Early Stages of Phase Formation during Mechanical Alloying of Ti-Al, T. Klassen, M. Oehring, R. Bormann, J. Mater. Res. 9 (1994), 47-52
• Formation of supersaturated solid solutions in the immiscible Ni-Ag system by mechanical  alloying, J. Xu, U. Herr, T. Klassen, R.S. Averback, J. Appl. Phys. 79 (1996), p. 3935-3945.
• Modeling of the Mechanical Alloying Process in Binary Systems, U. Herr, T. Klassen, R.S. Averback, in: „Metastable Phases and Microstructures, ed. by R. Bormann, G. Mazzone, R.D. Shull, R.S. Averback und R.F. Ziolo, (MRS, Pittsburgh, Pennsylvania), Mat. Res. Soc. Symp. Proc. Vol. 400 (1996), 19-24
• Mechanisms of Phase Formation during Milling in the Ternary Immiscible Ag-Cu-Fe System,T. Klassen, U. Herr, R.S. Averback, in: „Metastable Phases and Microstructures, ed. by R. Bormann, G. Mazzone, R.D. Shull, R.S. Averback und R.F. Ziolo, (MRS, Pittsburgh, Pennsylvania), Mat. Res. Soc. Symp. Proc. Vol. 400 (1996), 25-30.
• The Effects of Elevated Temperature Deformation on Nanocrystalline Titanium-Aluminum, L.S. Kim, T. Klassen, C.J. Altstetter, R.S. Averback, in: „Metastable Phases and Microstructures, ed. by R. Bormann, G. Mazzone, R.D. Shull, R.S. Averback und R.F. Ziolo, (MRS, Pittsburgh, Pennsylvania), Mat. Res. Soc. Symp. Proc. Vol. 400 (1996), 275-280.
• Ball Milling of Systems with Positive Heat of Mixing: Effect of Temperature in Ag-Cu, T. Klassen, U. Herr, R.S. Averback, Acta mater. 45 (1997), 2921-2930.
• Sinterforging and Indentation Creep of Nanophase TiAl, L.S. Kim, T. Klassen, R.S. Averback, C.J. Altstetter, Materials Science Forum Vol. 235-238 (1997), 881-886
• Microscopic Mechanisms of Metastable Phase Formation During Ball Milling of Intermetallic TiAl Phases, T. Klassen, M. Oehring, R. Bormann, Microscopic Mechanisms of Metastable Phase Formation During Ball Milling of Intermetallic TiAl Phases, Acta mater. 45 (1997), 3935-3948
• Processing and Characterization of Novel Intermetallic/Ceramic Composites, T. Klassen, R. Günther, B. Dickau, A. Bartels, R. Bormann, H. Mecking, Mater. Sci. Forum 269-272 (1998), 37-46
• Processing and Properties of Intermetallic/Ceramic Composites with Interpenetrating Microstructure, T. Klassen, R. Günther, B. Dickau, F. Gärtner, A. Bartels, R. Bormann, H. Mecking, J. Amer. Ceram. Soc. 81 (1998), 2504-2506
• Herstellung und Eigenschaften intermetallischer keramischer Verbundwerkstoffe,R. Günther, B. Dickau, T. Klassen, A. Bartels, F. Gärtner, R. Bormann, in: J. Heinrich, G. Ziegler, W. Hermel, H. Riedel (Hg.), „“Werkstoffwoche 98 – Band VII: Keramik/ Simulation Keramik““, Wiley-VCH (1998), 681-686.
• Nanocrystalline Mg-based Alloys for Hydrogen Storage,T. Klassen, W. Oelerich, K. Zeng, R. Bormann, J. Huot, in: Magnesium Alloys and their Applications, ed. by B.L. Mordike, and K.U. Kainer, Werkstoff-Informationsgesellschaft mbH, Frankfurt (1998), 307-311
• Mechanical Properties of Intermetallic/Ceramic Composites Prepared by High-Energy Milling, R. Bohn, G. Fanta, R. Günther, B. Dickau, T. Klassen, F. Gärtner, A. Bartels, R. Bormann, Journal of Metastable and Nanocrystalline Materials 2-6 (1999), 575-580; Materials Science Forum 312-314 (1999), 575-580
• Thermodynamics of the Ni-H-System, K. Zeng, T. Klassen, W. Oelerich, R. Bormann, J. Alloys and Compounds 283 (1999), 151-161
• Critical Assessment and Thermodynamic Modeling of the Mg-H-System, K. Zeng, T. Klassen, W. Oelerich, R. Bormann, Intern. J. Hydrogen Energy 24 (1999), 989-1004
• Thermodynamic Analysis of the Hydriding Process of Mg-Ni-Alloys, K. Zeng, T. Klassen, W. Oelerich, R. Bormann, J. Alloys and Compounds 283 (1999), 213-224
• Preparation and Properties of novel Nb- and Ti-based metal reinforced Alumina Composites with interpenetrating Microstructure,R. Günther, T. Klassen, B. Dickau, F. Gärtner, A. Bartels, R. Bormann, in: Ceramics – Processing, Reliability, Tribology and Wear, ed. by G. Müller (Wiley-VCH, Weinheim 2000), EUROMAT 12, 213-218.
• Nanocrystalline Composites for Thermal Spray Applications, F. Gärtner, R. Bormann, T. Klassen, H. Kreye, N. Mitra, Materials Science Forum Vols. 343-346 (2000), 933-940
• Hot-Forming of Silicide-Dispersion-Strengthened Titanium Aluminides (SDS-TiAl) with Grain Sizes in the Submicron Range,G. Fanta, R. Bohn, M. Dahms, T. Klassen, R. Bormann, Materials Science Forum Vols. 343-346 (2000), 623-628.
• Titanium Carbide Based Cermets for Thermal Spray Applications, F. Gärtner, H. Kreye, R. Bormann, T. Klassen, in: Surface Engineering, ed. by H. Dimigen (Wiley-VCH, Weinheim 2000), EUROMAT 11, 88-93.
• Advanced Nanocrystalline Materials and Potential Applications, T. Klassen, R. Bohn, G. Fanta, W. Oelerich, R. Günther, N. Eigen, E. Aust, R. Bormann, F. Gärtner, H. Kreye, Proc. Internatl. Symp. on Amorphous and Nanocrystalline Materials, ed. A. Inoue, Sendai 2000, 36-43
• Nanokristalline Mg-Hydride für die Wasserstoffspeicherung,T. Klassen, W. Oelerich, R. Bormann, Proceedings 8. Symposium Nutzung regenerativer Energiequellen und Wasserstofftechnik, Stralsund 2000
• Nanocrystalline Metal Hydrides for Hydrogen Storage,W. Oelerich, T. Klassen, R. Bormann, in: Functional Materials, ed. by K. Grassie, E. Teuckhoff, G. Wegner, J. Haußelt, H. Hanselka (Wiley-VCH, Weinheim 2000), EUROMAT 13, 141-145
• Potential Applications of Nanocrystalline Materials,T. Klassen,R. Bohn, G. Fanta, W. Oelerich, R. Günther, N. Eigen, E. Aust, R. Bormann, F. Gärtner, H. Kreye, Proceedings of Materials Week 2000 München, Werkstoff-Informationsgesellschaft mbH, Frankfurt, Germany (2002), on CD-ROM.
• Neuartige Nb- und Ti-Metallverstärkte Al₂O₃-Verbundwerkstoffe: Herstellung, Eigenschaften und potentielle Anwendungen,R. Günther, T. Klassen, A. Bartels, R. Bormann, in: DKG-Handbuch Technische Keramische Werkstoffe, ed. by J. Kriegesmann, Chapter 4.4.4.1 (2000), p. 1-19
• Advanced Alumina Composites Reinforced with Ti-based Alloys,R. Günther, T. Klassen, B. Dickau, F. Gärtner, A. Bartels, R. Bormann,  J. Am. Ceram. Soc. 84 (2001), 1509-1513
• Metal Oxides as Catalysts for Hydrogen Sorption of nanocrystalline Mg-based Alloys,W. Oelerich, T. Klassen, R. Bormann, Journal of Alloys and Compounds 315 (2001), 237-242
• Nanocrystalline Mg-based Hydrides:Hydrogen Storage for the Zero-Emission Vehicle, T. Klassen, W. Oelerich, R. Bormann, Materials Science Forum 360-362 (2001), 603-608, Journal of Metastable and Nanocrystalline Mat. 10 (2001), 603-608
• Hydrogen sorption of Mg at reduced temperatures by metal oxide catalysts,W. Oelerich, T. Klassen, R. Bormann, Adv. Eng. Mat. 3 (2001), 487-490
• Comparison of the catalytic effects of V, V₂0₅, VN, and VC on the hydrogen sorption of nanocrystalline Mg,W. Oelerich, T. Klassen, R. Bormann, Journal of Alloys and Compounds 322 (2001), L5-L9
• Hochtemperaturhydride: Energiespeicher für das emissionsfreie Automobil,T. Klassen, W. Oelerich, R. Bormann, Proceedings Workshop Wasserstoffspeicherung, 5.-6.2.2001, Reisensburg, 12-21.
• Mechanical Behavior and Advanced Processing of Nano- and Submicron-Grained Intermetallic Compounds Based on γ-TiAl,R. Bohn, G. Fanta, T. Klassen, R. Bormann, Scripta Mater. 44 (2001), 1479-1482
• Compaction of High-Energy-Milled TiAlSi Powders by HIP: A Simple Estimation of the Finest Grain Size Achievable,R. Bohn, T. Klassen, R. Bormann, Adv. Eng. Mat. 3 (2001), 238-242
• Submicron-Grained Multiphase TiAlSi Alloys: Processing, Characterization and Microstructural Design, R. Bohn, G. Fanta, T. Klassen, R. Bormann, Journal Materials Research 16 (2001), 1850-1861
• Mechanical Behavior of Submicron-Grained γ-TiAl based Alloys at Elevated Temperatures, R. Bohn, T. Klassen, R. Bormann, Intermetallics 9 (2001) 559-569
• Microstructural Characterization and Mechanical Behavior of Nano- and Submicron-Grained Titanium Aluminide/Titanium Silicide Composites Prepared by High Energy Milling, R. Bohn, G. Fanta, T. Klassen and R. Bormann, in: Powder Materials: Current Research and Industrial Practices, ed. by F.D.S. Marquis, N. Thadhani, and E.V. Barrera, TMS (The Minerals, Metals, & Materials Society, Warrendale, Pennsylvania, 2001), 107-126
• Advanced Processing and Application Properties of  γ-TiAl by Microstructure Design, G. Fanta, R. Bohn, M. Dahms, T. Klassen, R. Bormann, Proceedings of Materials Week 2000 München, Werkstoff-Informationsgesellschaft mbH, Frankfurt, Germany (2002), on CD-ROM.
• Nanocrystalline Mg-based Hydrides: Hydrogen Storage for the Zero-Emission-Vehicle, T. Klassen, W. Oelerich, R. Bormann, Hypothesis IV: International Symposium on Hydrogen Power – Theoretical and Engineering Solutions (Stralsund 9.-14. Sept. 2001), Proceedings Vol. 2 (2001), 261-265
• The Effect of Ultrafine Grained Microstructures on the Hot-Workability of Intermetallic/Ceramic Composites based on γ-TiAl, G. Fanta, R. Bohn, M. Dahms, T. Klassen, R. Bormann, Intermetallics 9 (2001), 45-49
• Mg-based Hydrogen Storage Materials with Improved Hydrogen Sorption, W. Oelerich, T. Klassen, R. Bormann, Materials Transactions (JIM) 42 (2001), 1588-1592
• Nanocrystalline Mg-based Hydrides: Hydrogen Storage for the Zero-Emission-Vehicle, T. Klassen, W. Oelerich, R. Bormann, in: Proc. Workshop Energietechnik mit Wasserstoff und Brennstoffzellen, University of Applied Sciences Lübeck, 26.-28.09.2001, Chapter 13, 1-5
• Nanocrystalline Mg-based hydrides for hydrogen storage, W. Oelerich, T. Klassen, R. Bormann, in: Synthesis, Functional Properties and Applications of Nanostructures, ed. by Horst W. Hahn, Rina Tannenbaum, Daniel L. Feldheim, Clifford P. Kubiak, Richard W. Siegel, Mat.Res.Soc.Symp.Proc. Vol 676 (2001), Y4.5.1 – Y4.5.12.
• Room-Temperature Mechanical Behaviour of Silicon-Doped TiAl Alloys with Grain Sizes in the Nano- and Submicron Range, R. Bohn, T. Klassen, R. Bormann, Acta Materialica 49 (2001), 299-311
• Advanced Alumina Composites Reinforced with Nb-based Alloys, R. Günther, T. Klassen, B. Dickau, F. Gärtner, A. Bartels, R. Bormann, Adv. Eng. Mat. 4 (2002), 121-125
• Light Metal Hydrides for Hydrogen Storage in the Zero-Emission Vehicle, E. Martinez-Franco, W. Oelerich, T. Klassen, R. Bormann, Materials Week 2001 – Proceedings, ed. Werkstoffwoche-Partnerschaft GbR, publ. Werkstoff-Informationsgesellschaft mbH, Frankfurt, 2002, on CD-ROM.
• Hydrogen Storage Devices in general and Nanocrystalline Light Metal Hydrides in particular, T. Klassen, European Fuel Cell News 8 (2002), 14-17
• Nanokristalline Hochtemperaturhydride als Energiespeicher für das emissionsfreie Automobil, T. Klassen, W. Oelerich, R. Bormann, h2-tec, 5/2002
• Microstructures and Properties of Nanocrystalline Composite Coatings, F. Gärtner, C. Borchers, H. Kreye, N. Eigen, T. Klassen, R. Bormann, W. Krömmer, V. Borck, Proc. International Thermal Spray Conference ITSC 2002, held in Essen, 04 – 06-March 2002, (ed.: E.F. Lugscheider, C.C. Berndt), DVS-Verlag, Düsseldorf (2002), 102-106
• High Energy Milling of Titanium Aluminides under Argon Atmosphere – General Problems and Potential Applications, G. Fanta, R. Bohn, T. Klassen, R. Bormann, Materials Science Forum Vols. 386-388 (2002), 521-528; Nanostructured Materials 13 (2002), 521-528.
• Cycling and Thermal Stability of Nanostructured MgH₂-Cr₂O₃ Composite for Hydrogen Storage, Z. Dehouche, T. Klassen, W. Oelerich, J. Goyette, T.K. Bose, R. Schulz, Journal of Alloys and Compounds 347 (2002), 319-323
• Properties of Wear resistant Spray Coatings Based on Nanocrystalline Cermet Precursor Powders, T. Klassen, N. Eigen, X. Qi, F. Gärtner, E. Aust, R. Bormann, H. Kreye, 2003 TMS Annual Meeting, Symposium on Surface Engineering in Materials Science II, March 2 – 6, San Diego, California, USA, TSM Warrendale, Pennsylvania, USA.
• Production of Nanocrystalline Cermet Thermal Spray Powders for Wear Resistant Coatings by High-Energy Milling, N. Eigen, T. Klassen, E. Aust, R. Bormann, F. Gärtner, H. Kreye, Materials Science and Engineering A 356 (2003), 114-121
• Tailoring Nanocrystalline Materials Towards Potential Application, T. Klassen, R. Bohn, G. Fanta, W. Oelerich, N. Eigen, E. Aust, R. Bormann, F. Gärtner, H. Kreye, Zeitschrift für Metallkunde 94 (2003), 610-614
• Fast hydrogen sorption kinetics of nanocrystalline Mg using Nb₂O₅ as catalyst, G. Barkhordarian, T. Klassen, R. Bormann, Scripta Mater. 49 (2003) 213
• Effect of Nb₂O₅ content on hydrogen reaction kinetics of Mg, G. Barkhordarian, T. Klassen, R. Bormann, J. Alloys Comp. 364 (2004), 242-246
• Mechanical Properties of Ultrafine-Grained Titanium Aluminide/Titanium Silicide Composites Prepared by High Energy Milling, T. Klassen, R. Bohn, C. Suryanarayana, G. Fanta, R. Bormann, TMS-Proccedings of the Materials Science and Technology Meeting 2003
• Hydrogenation of  nanocrystalline Mg-based alloys, D. Zander, L. Lyubenova, U. Köster, T. Klassen, M. Dornheim, in: Hydrogen Storage  Materials, eds. M.Nazri, G‑A.Nazri, R.C.Young, C.Ping, Mat. Res. Soc. Symp. Proc. 801 (Warrendale 2004), BB 3.1
• Hydrogen Storage Materials, M. Dornheim, T. Klassen, R. Bormann, http://www.jsps.go.jp/j-bilat/asi/data_2004/L18.pdf
• Microstructures and properties of nanostructured thermal sprayed coatings using high-energy milled cermet powders, N. Eigen, F. Gärtner, T. Klassen, E. Aust, R. Bormann and H. Kreye, Surface and Coatings Technology 195 (2005), 344 – 357
• Improvement in H-sorption kinetics of MgH₂ powders by using Fe nanoparticles generated by reactive FeF₃ addition, Alain Reza Yavari, Alain LeMoulec, Oliver Friedrichs, Fernando Ribeiro de Castro, Stefano Deledda, Gavin Vaughan, Asuncion Fernandez, Walter José Botta, Åke Kvick,  and Thomas Klassen, Scripta Materialia 52 (2005) 719–724
• H-Sorption in MgH₂ Nanocomposites Containing Fe or Ni with Fluorine, S. Deledda, A. Borissova, C. Poisignon, W.J. Botta, A.R. Yavari, M. Dornheim and Thomas Klassen, Journal of Alloys and Compounds 404–406 (2005), 409–412.
• Thermodynamic properties and absorption-desorption kinetics of Mg₈₇Ni₁₀Al₃ alloy synthesised by reactive ball milling under H2 atmosphere, S. Doppiu, P. Solsona, T. Spassov, G. Barkhordarian, M. Dornheim, T. Klassen, S. Suriñach ,and M.D. Baró, Journal of Alloys and Compounds 404-406, 8 December 2005, Pages 27-30
• Thermal Stability of Nanocrystalline MgH₂ for Hydrogen Storage, P.-A. Huhn, M. Dornheim, T. Klassen, R. Bormann, Journal of Alloys and Compounds 404-406, 8 December 2005, Pages 499-502
• ASAXS study of the catalyst distribution in nanostructured MgH₂/Me_xO_y, P.K. Pranzas, M. Dornheim, J.R. Ares, K.-F. Aguey-Zinsou, V. Leiner, T. Klassen, A. Schreyer, and G. Goerigk, DESY-Berichte 2006
• Structural characterisation of nanocrystalline MgH₂ for reversible storage of hydrogen using SAXS/USAXS, M. Dornheim, P.K. Pranzas, J.R. Ares, K.-F. Aguey-Zinsou, T. Klassen, A. Schreyer, and R. Gehrke, DESY-Berichte
• Nanocrystalline Light Metal Hydrides For Hydrogen Storage, T. Klassen, Kapitel in: Nanostructure Control of Materials, ed. by R. Hannink, A. Hill, Woodhead Publishing, Cambridge, England
• Two-body Abrasive Wear of Nano- and Microcrystalline TiC-Ni-Based Thermal Spray Coatings, X. Qi, N. Eigen, E. Aust, F. Gärtner, T. Klassen, R. Bormann, Surface and Coatings Technology 200 (2006), 5037 – 5047
• Two-body Abrasive Wear of Nano- and Microcrystalline TiC-Ni-Based Thermal Spray Coatings, X. Qi, E. Aust, N. Eigen, T. Klassen, R. Bormann, F. Gärtner, Advanced Engineering Materials 8 (2006) 427 – 433
• Chemical and microstructural study of the oxygen passivation behaviour of nanocrystalline Mg and MgH₂, O. Friedrichs, J.C. Sanchez-Lopez C. Lopez-Cartes, M. Dornheim, T. Klassen, R. Bormann, A. Fernandez, Applied Surface Science 252 (2006), 2334-2345
• Catalyzed Na₂LiAlH₆ for hydrogen storage, X.Z. Ma, E. Martinez-Franco, M. Dornheim, T. Klassen and R. Bormann, Journal of Alloys and Compounds 404-406, (2005) 771-774
• SANS/USANS investigations of nanocrystalline MgH₂ for reversible storage of hydrogen, P.K. Pranzas, M. Dornheim, D. Bellmann, K.-F. Aguey-Zinsou, T. Klassen and A. Schreyer, Physica B: Condensed Matter 385-386 (2006), 630-632
• Influence of the Nb₂O₅ distribution on the electrochemical hydrogenation of nanocrystalline magnesium, D. Zander, L. Lyubenova, U. Köster, T. Klassen and M. Dornheim, Journal of Alloys and Compounds, In Press, Corrected Proof, Available online 6 October 2006
• Influence of impurities on the milling process of MgH₂, J.R. Ares, K.-F. Aguey-Zinsou, T. Klassen and R. Bormann, Journal of Alloys and Compounds, In Press, Corrected Proof, Available online 28 September 2006
• Effect of nanosized oxides on MgH₂ (de)hydriding kinetics, K.-F. Aguey-Zinsou, T. Nicolaisen, J.R. Ares Fernandez, T. Klassen and R. Bormann,Journal of Alloys and Compounds, In Press, Corrected Proof, Available online 25 September 2006
• Mechanical and thermal decomposition of LiAlH4 with metal halides, J.R. Ares Fernandez, F. Aguey-Zinsou, M. Elsaesser, X.Z. Ma, M. Dornheim, T. Klassen and R. Bormann, International Journal of Hydrogen Energy, In Press, Corrected Proof, Available online 18 September 2006
• Using MgO to improve the (de)hydriding properties of magnesium, K.-F. Aguey-Zinsou, J.R. Ares Fernandez, T. Klassen and R. Bormann, Materials Research Bulletin 41, (2006),  1118-1126
• Hydrogen sorption improvement of nanocrystalline MgH₂ by Nb₂O₅ nanoparticles, O. Friedrichs, T. Klassen, J.C. Sánchez-López, R. Bormann and A. Fernández, Scripta Materialia 54 (2006), 1293-1297
• The catalytic effect of Nb₂O₅ on the electrochemical hydrogenation of nanocrystalline magnesium, D. Zander, L. Lyubenova, U. Köster, M. Dornheim, F. Aguey-Zinsou and T. Klassen, Journal of Alloys and Compounds 413 (2006), 298-301
• MgH₂ with Nb₂O₅ as additive, for hydrogen storage: Chemical, structural and kinetic behavior with heating, O. Friedrichs, F. Aguey-Zinsou, J.R. Ares Fernández, J.C. Sánchez-López, A. Justo, T. Klassen, R. Bormann and A. Fernández, Acta Materialia 54 (2006), 105-110
• Electrochemical storage of hydrogen in Nb₂O₅  and FeF₃ magnesium nanocomposites, Ana Borissova, Christiane Poinsignon, Alain R. Yavari, Stefano Deledda, and Thomas Klassen, submitted to Journal of Alloys and Compounds

Dr. rer. nat. Frank Gärtner

• Determination of the Free Energy of Metallic Glasses, R. Bormann, F. Gärtner, P. Haasen,  Z. Phys. Chem. 157 (1988) 29-34.
• Determination of the Free Energy of Equilibrium and Metastable Phases in the Cu-Zr System, R. Bormann, F. Gärtner, F. Haider, Mat. Sci. and Eng. 97 (1988) 79-81.
• Application of the CALPHAD-Method for the Prediction of Amorphous Phase Formation, R. Bormann, F. Gärtner, K. Zöltzer, J. Less.-Common-Metals 145 (1988) 19-29.
• Thermodynamics of Stable and Metastable Phases in the Ni-Zr and the Co-Zr System and their Application to Amorphous Phase Formation, F. Gärtner and R. Bormann, Colloque de Physique 51 (1990) C4/95-C4/99.
• Thermodynamic Properties of Oxide Superconductors, R. Bormann, H.P. Knöchel, S. Friedrichs, H.U. Krebs, F. Gärtner, J. Nölting, P. König, S. Gauss, M. Wilhelm, Proc. International Symposium on High Temperature Superconductors: Materials Aspects, (eds. H.C. Freyhardt, R. Flükiger, M. Peukert), DGM Informationsgesellschaft MbH, Oberursel (1991) 691-696.
• Spinodal Decomposition of CuCo Alloys: A Computer Simulation and some FIM Results, Jun-Ming Liu, R. Busch, F. Gärtner, P. Haasen, Phys. Stat. Sol. (a) 138 (1993) 157-174.
• The earliest Stage of the Solid State Amorphization Reaktion in the Zr-Co System, R. Busch, F. Gärtner, S. Schneider, R. Bormann, P. Haasen, Mat. Res. Soc. Symp. Proc. 343 (1994) 229-334.
• The Realtionship between the External Surface and Internal Microstructure of Cu-Ni Dropletts, A. Garcia-Escorial, F. Gärtner, A.F. Norman, A.L. Greer, C. Casado, Proc. IV Int. Workshop on Non-Crytalline Solids (Madrid, Spain, September 1994, edited by M. Váquez and A. Hernando), World Scientific (1995) 140-144.
• Microstructure Development during Rapid Solidification of Highly Supersatuated Cu-Co Alloys, R. Busch, F. Gärtner, C. Borchers, R. Bormann, P. Haasen, Acta. Metall. et Mater. 43 (1995) 3467-3476
• Microstructure-Selection Maps for Deeply Undercooled Fe-Ni Alloy Droplets, A.F. Norman, F. Gärtner, A.L. Greer, Proc.. 4th Euro. Conf. on Advanced Materials and Processes (EURO MAT 95), (Padova/Venezia, Italy, September 1995), Associazione Italiana di Metallurgia, Milano (1995) 283-289.
• High-Resolution Microstructure Analysis of the Decomposition of Cu₉₀Co₁₀ Alloys, R. Busch, F. Gärtner, C. Borchers, P. Haasen, R. Bormann, Acta. Materialia 44 (1996) 2567-2579
• Influence of Melt Undercooling on the Microstructure of Fe-Ni Droplets Produced in the Cambridge 6.5 m Drop Tube, A.F. Norman, F. Gärtner, A.L. Greer, Materials Science Forum 215 (1996) 21-28.
• Use of Texture Analysis for the Characterisation of Cu-30 at {3728c0ddcf5026c65bc0b4e995c837d09025c3e7fa253cea254631dfe46bf841} Ni Droplets Solidified at Selected Undercoolings, F. Gärtner, A.F. Norman, K Eckler, A.L. Greer, D.M. Herlach, Materials Science Forum 215 (1996) 29-36
• An Investigation of Grain Refinement in Deeply Undercooled Alloy Droplets Using Texture Analysis, A.F. Norman, F. Gärtner, A.L. Greer, K. Eckler, D.M. Herlach, A. Zambon, E. Ramous, Mat. Res. Soc. Symp. Proc. 398 (1996) 63-68.
• Determination of the Chemical Potentials of Highly Supersaturated Cu-Co Alloys, F. Gärtner, R. Busch, P. Haasen, R. Bormann, Mat. Res. Soc. Symp. Proc. 400 (1996) 119-124.
• Competitive Phase Selection in Fe-Ni Alloy Droplets, F. Gärtner, A.F. Norman, H. Assadi, A.L. Greer, Mat. Res. Soc. Symp. Proc. 398 (1996) 51-56.
• Decomposition of Unstable Supersaturated Cu90Co10 Solid Solid Solutions, R. Busch, F. Gärtner, C. Borchers, R. Bormann, Mat. Res. Soc. Symp. Proc. 400 (1996) 125-130.
• Thermodynamic Stability of Nanocrystalline Pd, F. Gärtner, R. Bormann, A. Tschöpe, R. Birringer, Scipta Mater. 35 (1996) 805-810
• Microstructures of Dilute Ni-C Alloys Obtained from Undercooled Droplets, K. Eckler, A.F. Norman, F. Gärtner, A.L. Greer, D.M. Herlach, J. Cryst. Growth 173 (1996) 528-540
• Texture Analysis of the Developement of Microstructure in Cu-30 at{3728c0ddcf5026c65bc0b4e995c837d09025c3e7fa253cea254631dfe46bf841} Ni Droplets Solidified at Selected Undercoolings, F. Gärtner, A.F. Norman, A.L. Greer, A. Zambon, E. Ramous, K. Eckler, D.M. Herlach, Acta Materialia. 45 (1997) 51-66
• Phase Separation in Amorphous Zr-Co and Zr-Fe Alloys, F. Gärtner, C. Michaelsen, R. Bormann, Phil. Mag. B 76 (1997) 511-517.
• Phase Selection, Growth and Interface Kinetics in Undercooled Fe-Ni Melt Droplets, K. Eckler, F. Gärtner, H. Assadi, A.F. Norman, A.L. Greer, D.M. Herlach, Materials Science and Engineering A 226 (1997) 410-414.
• Texture Analyses of Levitated Fe₆₉Ni₃₉Cr₁ Droplets, F. Gärtner, S.A. Moir, A.F. Norman, A.L. Greer, D.M. Herlach, Materials Science and Engineering A 226 (1997) 307-311.
• The Application of Microstructure-Selection Maps to Droplet Solidification, A.F. Norman, K. Eckler, F. Gärtner, S.A. Moir, A. Zambon, A.L. Greer, E. Ramous, D.M. Herlach, Materials Science and Engineering A 226 (1997) 48-52
• Microstructure-selection maps applied to droplet solidification, K. Eckler, F. Gärtner, A. L. Greer, D. M. Herlach, S. A. Moir, A. F. Norman, E. Ramous, A. Zambon, Proc. 4th Decennial International Conference on Solidification Processing (SP’97 – Sheffield, UK, 7-10 July 1997), (eds. J. Beech and H. Jones), University of Sheffield (1997) 577-581.
• Thermodynamics of homogeneous crystal nucleation in Al-RE metallic glasses, M. Baricco, F. Gärtner, P. Rizzi, L. Battezzati, G. Cacciamani and A. L. Greer, Proc. International Symposium on Metastable, Mechanically Alloyed and Nanocrystalline Materials, ISMANAM-97, held in Sitges, Spain, 31 August to 5 September 1997, (eds. M. D. Baro and S. Surinach), Materials Science Forum, 269-272 (1998) 553-558.
• Application of Microstructure Selection Maps to Droplet Solidification: A Case Study of the Cu-Ni System, A.F. Norman, K. Eckler, A. Zambon, F. Gärtner, S.A. Moir, E. Ramous, D.M. Herlach, A.L. Greer, Acta Materialia. 46 (1998) 3355-3370
• Microstructure and Phase Selection in Containerless Processing of Fe-Ni Droplets, A. Zambon, A. Badan, K. Eckler, F. Gärtner, A.F. Norman, A.L. Greer, D.M. Herlach, E. Ramous, Acta Materialia 46 (1998) 4657-4670
• Processing and Properties of Intermetallic-Ceramic Composites with Interpenetrating Microstructure, T. Klassen, R. Günther, B. Dickau, F. Gärtner, A. Bartels, R. Bormann, H. Mecking, J. American Ceramic Soc. 81 (1998) 2504-2506
• Herstellung und mechanische Eigenschaften metallverstärkter Keramik-Verbundwerkstoffe, R. Günther, T. Klassen, B. Dickau, A. Bartels, F. Gärtner, R. Bormann, Proc. Werkstoffwoche 98 – Volume VII, Keramik / Simulation Keramik (ed.: J. Heinrich, G. Ziegler, W. Hermel, H. Riedel), WILEY-VCH, Weinheim, Germany, (1998) 681-686.
• Mikrostruktur und Eigenschaften von elektrolytisch abgeschiedenen Nickel-Wolfram-Schichten, F. Gärtner, B. Junk, H, Kreye, Galvanotechnik 90 (1999) 996-1000.
• Mechanical Properties of Intermetallic/Ceramic Composites Prepared by High Energy Milling, R. Bohn, G. Fanta, R. Guenther, B. Dickau, T. Klassen, F. Gärtner, A. Bartels and R. Bormann, Proc. of the International Symposium on Metastable, Mechanical Alloyed and Nanocrystalline Materials, ISMANAM 98, held in Wollongong (Sydney), Australia, December 1998, (eds.: A. Calka, D. Wexler), Materials Science Forum 312 – 314 (1999) 575-580.
• Nanocrystalline Composites for Thermal Spray Applications, F. Gärtner, R. Bormann, T. Klassen, H. Kreye, N. Mitra, Proc. International Conference on Metastable, Mechanically Alloyed and Nanocrystalline Materials, ISMANAM 99, held in Dresden, Germany, August 29 – September 03, 1999, (eds.: J. Eckert, H. Schlörb and L. Schultz), Materials Science Forum 343-346 (2000) 933-940
• Titanium Carbide Based Cermets for Thermal Spray Applications, F. Gärtner, H. Kreye, R. Bormann, T. Klassen, Proc. International Congress on Advanced Materials and Processes, EUROMAT 99, Volume 11, Surface Engineering held in München, Germany, September 27 – 30, 1999, (ed.: H. Dimigen), WILEY-VCH, Weinheim, Germany, (2000) 88-93.
• Preparation and Properties of Novel Nb- and Ti-based Metal Reinforced Alumina Composites with Interpenetrating Microstructure, R. Günther, T. Klassen, B. Dickau, F. Gärtner, A. Bartels, R. Bormann, Proc. International Congress on Advanced Materials and Processes, EUROMAT 99, Volume 12, Ceramics Processing, Reliability, Tribology and Wear held in München, Germany, September 27 – 30, 1999, (ed.: G. Müller), WILEY-VCH, Weinheim, Germany, (2000) 213-218.
• The Effect of Oxidation on Microstructure and Properties of TiC-Based Cermet Coatings, F. Gärtner, H. Kreye, V. Borck and W. Krömmer, Proc. ITSC 2000, Thermal Spray: Surface Engineering via Applied Research held in Montreal, Canada, May 8 ? 11, 2000, (ed.: C.C. Berndt), ASM International, (2000) 463-469.
• Potential Applications for Nanocrystalline Materials, T. Klassen, R. Bohn, G. Fanta, W. Oelerich, R. Günther, N. Eigen, E. Aust, R. Bormann, F. Gärtner, H. Kreye, Proc. „MATERIALS WEEK 2000“, München, Germany, September 25 ? 28, editor and organiser: Werkstoffwoche-Partnerschaft, Frankfurt, 2000
• Advanced Nanocrystalline Materials and Potential Applications, T. Klassen, R. Bohn, G. Fanta, W. Oelerich, R. Günther, N. Eigen, E. Aust, R. Bormann, F. Gärtner, H. Kreye, Proc. of the International Symposium on Amorphous and Nanocrystalline Materials (NANO 2000), Sendai, Japan, August 25 ? 27, 2000.
• High Velocity Oxy-Fuel Flame Spraying State of the Art, Prospects and Alternatives, H. Kreye, F. Gärtner, A. Kirsten, R. Schwetzke, Proc. 5. Kolloqium Hochgeschwindigkeits – Flammspritzen, Erding, Germany, November 16 ? 17, 2000, (ed.: P. Heinrich), Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany, (2000) 5-19.
• Advanced Alumina Composites Reinforced with Ti-Alloys, R. Günther, T. Klassen, B. Dickau, F. Gärtner, A. Bartels, R. Bormann, J. American Ceramic Soc. 84 (2001) 1509-1513
• Deformation Microstructure of Cold Sprayed Coatings Studied by Electron Microscopy, C. Borchers, T. Stoltenhoff, F. Gärtner, H. Kreye, H. Assadi, Mat. Res. Soc. Symp. Proc. 673 (2001) P7.10.
• High Velocity Combustion Wire Spraying – Systems and Coatings, H. Kreye, A. Kirsten, F. Gärtner, X. Qi,. W. Krömmer, Proc. ITSC 2001, Thermal Spray 2001: New Surfaces for a new Millennium held in Singapore, May 28 ? 30, 2001, (ed.: C.C. Berndt, K.A. Khor and E.F. Lugscheider), ASM International, (2001) 461-466.
• Microstructures and Properties of Nanocrystalline Composite Coatings, F. Gärtner, C. Borchers, H. Kreye, N. Eigen, T. Klassen, R. Bormann, W. Krömmer, V. Borck, Proc. International Thermal Spray Conference (ITSC) 2002, held in Essen, March 4 ? 6, 2002, (ed.: E.F. Lugscheider, C.C. Berndt), DVS-Verlag, Düsseldorf, (2002) 102-106.
• Corrosion Behaviour of High Velocity Combustion Wire Sprayed Coatings, M. F. O. Schiefler, J. Voyer, F. Gärtner, X. Qi, Proc. International Thermal Spray Conference (ITSC) 2002, held in Essen, March 4 ? 6, 2002, (ed.: E.F. Lugscheider, C.C. Berndt), DVS-Verlag, Düsseldorf, (2002) 553-558.
• <a href=“http://dx.doi.org/10.1002/1527-2648(200203)4:33.0.CO;2-T“ target=“_blank“ rel=“noopener noreferrer“>Advanced Alumina Composites Reinforced with Nb-Alloys, R. Günther, T. Klassen, B. Dickau, F. Gärtner, A. Bartels, R. Bormann, Adv. Eng. Mat. 4 (2002), 121-125.
• Estudo Eletroquimico e Microestrutural de Revestimentos Aspergidos Termicamente para a Proteção do Aço contra a Corrosão Marinha (Electrochemical and Microstructural Investigation of Thermal Spray Coatings for the Steel Protection against Marine Corrosion), M.F.O. Schiefler F, A.J.A. Buschinelli, F. Gärtner, J. Voyer, H. Kreye, Proc. 22^nd Congresso Brasileiro de Corrosão Promoção: ABRACO (22^nd CONBRASCORR), August 19 ? 21, 2002, Salvador-BA, Brasil, article COTEQ_060, on CD.
• Bonding mechanism in cold gas spraying, H. Assadi, F. Gärtner, T. Stoltenhoff, H. Kreye, Acta Materialia 51 (2003) 4379-4394
• Microstructural and Macroscopic Properties of Cold Sprayed Copper Coatings, C.Borchers, F.Gärtner, T.Stoltenhoff, H.Assadi, H.Kreye, Journal of Applied Physics 93 (2003) 10064-10070
• Production of Nanocrystalline Cermet Thermal Spray Powders for Wear Resistant Coatings by High-Energy Milling, N. Eigen, T. Klassen, E. Aust, R. Bormann, F. Gärtner, H. Kreye, Materials Science and Engineering A 356 (2003) 114-121
• Tailoring Nanocrystalline Materials Towards Potential Applications,T. Klassen, R. Bohn, G. Fanta, W. Oelerich, N. Eigen, F. Gärtner, E. Aust, R. Bormann, H. Kreye, Zeitschrift Metallkunde 94 (2003) 610-614
• Wear Behavior of Spray Coatings Based on Nanocrystalline Cermet Powders, T. Klassen, N. Eigen, X. Qi, F. Gärtner, E. Aust, R. Bormann, H. Kreye, Proc. Surface Engineering in Materials Science II, TMS Annual Meeting, March 2 – 6, San Diego, California, USA, eds. S. Seal, N.B. Dahotre, J. Moore, C. Suryanaryana, A. Agarwal, The Surface Engineering Committee of the MPMD of TMS, TSM Warrendale, Pennsylvania, USA, 99 – 110.
• Numerical and Microstructural Investigations of the Bonding Mechanisms in Cold Spraying, F. Gärtner, C. Borchers, T. Stoltenhoff, H. Kreye, H. Assadi, Proc. ?International Thermal Spray Conference 2003?: Advancing the Science and Applying the Technology, May 5 ? 8, 2003, Orlando, Florida USA, eds. B.R. Marple and C. Moreau, ASM International 2003, 1 – 8.
• High Strain Rate Deformation Phenomena in Explosive Powder Compaction and Cold Gas Spraying, T. Schmidt, F. Gärtner, H. Kreye, Proc. ?International Thermal Spray Conference 2003?: Advancing the Science and Applying the Technology, May 5 ? 8, 2003, Orlando, Florida USA, eds. B.R. Marple and C. Moreau, ASM International 2003, 9 – 18.
• Protection of Steel Components Against Marine Corrosion by Thermally Sprayed Anodic Coatings, M. F. O. Schiefler, F. Gärtner, J. Voyer, A. Kirsten, H. Kreye, A. J. A. Buschinelli, Proc. ?International Thermal Spray Conference 2003?: Advancing the Science and Applying the Technology, May 5 ? 8, 2003, Orlando, Florida USA, eds. B.R. Marple and C. Moreau, ASM International 2003, 361 – 370.
• Influência de Parâmetros de Processo na Qualidade de Revestimentos de Aço X46Cr13 Aspergidos Termicamente (Influence of Process Parameters on the Quality of Thermally Sprayed X46Cr13, M. F. O. Schiefler, A. J. A. Buschinelli, F. Gärtner, A. Kirsten, J. Voyer, H. Kreye, Proc. Congresso Brasileiro de Engenharia de Fabricação, Promoção: ABCM (II COBEF), May 18 ? 21, 2003, Uberlândia-MG, Brasil, article COF03_0546, on CD.
• Thermal stability of Nanocrystalline Nickel-18 at.{3728c0ddcf5026c65bc0b4e995c837d09025c3e7fa253cea254631dfe46bf841} Tungsten Alloy Investigated with the Tomographic Atom Probe, P. Choi P, T. Al-Kassab, F Gärtner, H. Kreye, R. Kirchheim, Materials Science and Engineering A ? Structural Materials, Properties, Microstructure and Processing 353 (2003) 74-79
• High Velocity Oxy-Fuel Flame Spraying – State of the Art, new Developments and Alternatives / Hochgeschwindigkeits-Flammspritzen – Stand der Technik, neue Entwicklungen und Alternativen, H. Kreye, F. Gärtner, H.J. Richter, Proc. 6. Kolloqium Hochgeschwindigkeits – Flammspritzen, Erding, Germany, November 27 ? 28, 2003, (ed.: P. Heinrich), Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany, (2003) 5 – 17.
• Einsatz analytischer Verfahren zum Verständnis undzur Optimierung des Kaltgasspritzens/ Application of Analytical Methods for Understanding and Optimization of the Cold Spray Process, H. Assadi, F. Gärtner, T. Stoltenhoff, H. Kreye, Proc. 6. Kolloqium Hochgeschwindigkeits – Flammspritzen, Erding, Germany, November 27 ? 28, 2003, (ed.: P. Heinrich), Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany, (2003) 49 – 59.
• Neue Herausforderungen für das Draht- und Stabflammspritzen / New Challenges for Wire and Rod Flame Spraying, F. Gärtner, J. Voyer, Xiumei Qi, H. Kreye, H.J. Richter, W. Krömmer, Proc. 6. Kolloqium Hochgeschwindigkeits – Flammspritzen, Erding, Germany, November 27 ? 28, 2003, (ed.: P. Heinrich), Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany, (2003) 61 – 71.
• Recent Developments in High Velocity Oxy-Fuel Flame Spraying, H. Kreye, F. Gärtner, Proc. 1^st Tsukuba International (Japanese-German) Coatings Symposium: Recent Trends in Coatings Technology to Challenge Harsh Environments and to Open New Applications, Tsukuba, Japan, May 17 ? 18, 2004, (ed. S. Kuroda), National Institute for Materials Science, Tsukuba, Japan, (2004) 4 – 5.
• Process Analysis and Bonding Mechanism of Cold Spraying, F. Gärtner, T. Schmidt, H. Assadi, T. Stoltenhoff, H. Kreye, Proc. 1^st Tsukuba International (Japanese-German) Coatings Symposium: Recent Trends in Coatings Technology to Challenge Harsh Environments and to Open New Applications, Tsukuba, Japan, May 17 ? 18, 2004, (ed. S. Kuroda), National Institute for Materials Science, Tsukuba, Japan, (2004) 8 – 9.
• High Strain Rate Deformation Phenomena in Cold Spraying and Explosive Powder Compaction, T. Schmidt, F. Gärtner, H. Kreye, Proc. 1^st Tsukuba International (Japanese-German) Coatings Symposium: Recent Trends in Coatings Technology to Challenge Harsh Environments and to Open New Applications, Tsukuba, Japan, May 17 ? 18, 2004, (ed. S. Kuroda), National Institute for Materials Science, Tsukuba, Japan, (2004) 12 – 13.
• Abrasive wear mechanisms of VPS- and HVOF-sprayed TiC-Ni-based nanocrystalline coatings, X. Qi, E. Aust, N. Eigen, F. Gärtner, and R. Bormann, Proc. DGM Conf. Reibung und Verschleiß, Fürth, Germany, March 10 ? 12, 2004, Materialwissenschaft und Werkstofftechnik 35 (2004)779 – 784.
• Microstructural Bonding Features of Cold Sprayed Face Centered Cubic Metals, C. Borchers, F. Gärtner, T. Stoltenhoff, H. Kreye, Journal of Applied Physics 96 (2004) 4288 – 4292
• Microstructures and Properties of Nanocrystalline Thermal Spray Coatings Using High-Energy Milled Cermet Powders, N. Eigen, T. Klassen, E. Aust, R. Bormann, F. Gärtner, Surface and Coatings Technology 195 (2005) 344 ? 357
• Formation of persistent dislocation loops by ultra-high strain-rate deformation during cold spraying, C. Borchers, F. Gärtner, T. Stoltenhoff, H. Kreye, Acta Materialia 53, (2005) 2991 ? 3000
• High Velocity Impact Phenomena and Coating Quality in Cold Spraying, T. Schmidt, F. Gärtner, H. Assadi, T. Stoltenhoff, H. Kreye, Proc. ?International Thermal Spray Conference 2005?: Thermal Spray connects: Explore its surfacing potential, May 2 – 4, 2005, Basel, Switzerland, ed. E. Lugscheider, DVS-Verlag, Düsseldorf, Germany, 2005, 232 ? 238.
• The Cold Spray Process and its Potential for Industrial Applications, Frank Gärtner, Thorsten Stoltenhoff, Tobias Schmidt, Heinrich Kreye,Proc. ?International Thermal Spray Conference 2005?: Thermal Spray connects: Explore its surfacing potential, May 2 – 4, 2005, Basel, Switzerland, ed. E. Lugscheider, DVS-Verlag, Düsseldorf, Germany, 2005, 158 – 163. Extended version as invited paper in: Journal Thermal Spray Technology 15 (2006), in press
• Schichten und Strukturen durch Kaltgasspritzen, H. Kreye, F. Gärtner, T. Schmidt, T. Stoltenhoff, H.J. Richter, and H. Assadi, Uniforschung Forschungsmagazin der Helmut-Schmidt-Universität / Universität der Bundeswehr Hamburg, ISSN 0940-8061, 15 (2005) 27 – 31.
• Two-body Abrasive Wear of Nano- and Microcrystalline TiC-Ni-Based Thermal Spray Coatings, Xiumei Qi, Nico Eigen, Eckhard Aust, Frank Gärtner, Thomas Klassen, Rüdiger Bormann, Surface and Coatings Technology 200 (2006) 5037 ? 5047
• Microstructures and Key Properties of Cold-sprayed and Thermally Sprayed Copper Coatings, T. Stoltenhoff, C. Borchers, F. Gärtner, H. Kreye, SurfaceandCoatings Technology 200 (2006) 4947 ? 4960
• Development of a Generalized Parameter Window for Cold Spray Deposition, T. Schmidt, F. Gärtner, H. Assadi, H. Kreye, Acta Materialia 54 (2006) 729 ? 742
• TiC-based cermet coating: Advanced wear performence by nanocrystalline microstructure, X. Qi, E. Aust, N. Eigen, T. Klassen, R. Bormann, F. Gärtner, Advanced Engineering Materials 8 (2006) 427-4333
• Bonding Mechanisms and Applications of Cold Spraying, F. Gärtner, H. Assadi, H. Kreye, T. Schmidt, T. Stoltenhoff, Proc. SMT 18, Dijon, November 15th – 17th 2004, „Surface Modification Technologies XVIII“, Eds. T. S. Sudarshan, M. Jeandin, J.J. Stiglich, Maney Publishing, London, UK, 2006, 35-43
• New Developments in Cold Spray Based on Higher Gas- and Particle Temperatures, T. Schmidt, F. Gärtner, H. Kreye, „Thermal Spray 2006: Science, Innovation and Application“ , Eds. B.R.Marple, C.Moreau, ASM International, Materials Park, OH, USA, 2006, ISBN 0-87170-809-4, on CD, article no.:s2_1-12003
• The Cold Spray Process and its Optimization, H. Kreye, T. Schmidt, F. Gärtner, T. Stoltenhoff, „Thermal Spray 2006: Science, Innovation and Application“ , Eds. B.R.Marple, C.Moreau, ASM International, Materials Park, OH, USA, 2006, ISBN 0-87170-809-4, on CD, article no.:s2_1-12011
• Mechanical Properties of Cold Sprayed and Thermally Sprayed Copper Coatings, F. Gärtner, T. Stoltenhoff, J. Voyer, H. Kreye, S. Riekehr, M. Koçak, Surface and Coatings Technology 200 (2006) 6770-6782
• Recent Developments and Potential Applications of Cold Spraying, F. Gärtner, T. Schmidt, T. Stoltenhoff and H. Kreye, Advanced Engineering Materials 7 (2006) 611-618
• Advances in Cold Spraying, F. Gärtner, Surface Engineering 22 (2006) 161-163
• Present Status and Future Prospects of Cold Spraying, F. Gärtner, T. Schmidt, H. Kreye, Proc. Powder Metallurgy World Congress 2006 (PM2006), accepted for publication in Materials Science Forum, 2006.
• Characteristics of Particle Bonding and Material Deposition in Cold Spraying, H. Assadi, T. Schmidt, F. Gärtner, H. Kreye, submitted for Proc. Conference of Metallurgists, COM 2006, Montreal.

Prof. Dr. Heinrich Kreye

• Elektronenmikroskopische Untersuchung zum Bindemechanismus beim Sprengplat­tieren, H. Kreye, I. Wittkamp, U. Richter: Z. Metallkunde 67 (1976) S. 141-147
• Rekristallisation mehrphasiger Werkstoffe, E. Hornbogen, H. Kreye, in: Grundlagen der Wärmebehandlung von Stahl, Verlag Stahleisen 1976, S. 143-154
• Metallkundliche Vorgänge beim Explosivschweißen, H. Kreye, in: Proc. III. Int. Conf. on Explosives, Marianske Lazne CSSR 1976, S. 107-115
• Über die Ursache der Rißbildung beim Spannungsarmglühen von geschweißten Feinkornbaustählen, H. Kreye, I. Olefjord, J. Löttgers: Archiv Eisenhüttenw. 48 (1977) S. 291-295
• Zielpräparation von Schweißnähten für die Durchstrahlungs-Elektronenmikroskopie, H. Kreye, I. Wittkamp: Prakt. Metallogr. 16 (1977) S. 125-139
• Melting Phenomena in Solid State Welding, H. Kreye: Welding Journal 56 (1977) 154s-158s
• Gefügeänderungen und Bindemechanismus beim Reibschweißen, H. Kreye, I. Wittkamp: Z. Metallkde 68 (1977) S. 253-259
• Elektronenmikroskopische Untersuchungen zum Bindemechanimus beim Kaltpreß-schweißen, H. Kreye, K. Thomas: Schweißen und Schneiden 29 (1977) S. 249-252
• Mikrostruktur und Verformungsverhalten von Explosivplattierungen, H. Kreye, M. Hammerschmidt, in: Proc. VI. Int. Conf. on High Energy Rate Fabrication, Essen 1977, P. 2.11.1
• Anwendung der Rasterelektronenmikroskopie zur Charakterisierung von Werkstoff- versprödungen in der wärmebeeinflußten Zone von Schweißverbindungen, U. Brenner, H. Kreye: DVM Bericht Berlin (1977) S. 79-85
• Gefüge und mechanische Eigenschaften der Legierung Kupfer-Nickel9-Zinn2, U. Gerlach, H. Kreye: Metall 32 (1978) S. 1112-1115
• Ultrasonic Welding of Metallic Alloy Glass to Copper, H. Kreye, M. Hammerschmidt, G. Reiners: Scripta Met. 12 (1978) p. 1059-1061
• Die Bindezone von Explosivplattierungen, M. Hammerschmidt, U. Richter: Proc. IV. Intern. Conf. on Explosive Working of Metals, Gottwaldov CSSR 1979, S. 104-121
• Schweißverhalten von metallischen Gläsern, M. Hammerschmidt, H. Kreye, B. Meinck: Metall 34 (1980) S. 23-27
• Versprödungserscheinungen in mikrolegierten Stählen und deren Einfluß auf das Schweißverhalten unter extremen Bedingungen, U. Brenner, H. Kreye, H. Baumgardt: Archiv Eisenhüttenw. 51 (1980) S. 393-398
• Schweißverfahren für metallische Gläser, H. Kreye, M. Hammerschmidt, in: Fügen von Keramik, Glas u. Metall, DVS-Bericht Bd 66 (1980) S. 23-28
• Microstructure and Bonding Mechanism in Explosive Welding, M. Hammerschmidt, H. Kreye, in: Shock Waves and High Strain-Rate Phenomena in Metals. Plenum Press, New York 1981, p. 961-973
• Microstructural Features Determining the Properties of Explosive Welds, M. Hammerschmidt, H. Kreye, in: High Energy Rate Fabrication, Applied Science Publ., Essex 1982, p. 60-70
• The Role of Adiabatic Shearing in Explosive Welding, M. Hammerschmidt, H. Kreye, in: Proc. 2. Intern. Meeting on Explosive Working of Materials; Novosibirsk USSR 1982, p. 117-125
• Verbindungsbildung beim Reibschweißen, H. Kreye: Berichtsband 2. Aachener Reibschweißkolloquium, Aachen 1982, S. 1-15
• The Mechanism of Pseudo-intercrystalline Brittleness of Precipitation-hardened Alloys and Tempered Steels, E. Hornbogen, H. Kreye: Journ. Materials Science 17 (1982) S. 979-988
• Neuere Anwendungsmöglichkeiten für das Reibschweißen, H. Kreye: Werkstatt und Betrieb 115 (1982) S. 703-706
• Transmission Electron Microscope Investigation of the Microstructure Affected by the Bonding Process during Oblique Collision of Metallic Surfaces, H. Kreye, M. Hammerschmidt: Proc. V. Intern. Symp. on Use of Explosive Energy in Manufacturing Metallic Materials of New Properties, Gottwaldov CSSR 1982, p. 130-146
• Mikrostruktur und Eigenschaften von Explosivschweißungen, M. Hammerschmidt: Fortschr.-Ber. Reihe 2 Nr. 52, VDI-Verlag Düsseldorf 1983, S. 1-199
• Untersuchungen zum thermischen Spritzen von WC-Co mit dem Hypersonic Spray-Verfahren, H. Kreye, G. Bechtloff, H. Bick: Metall 37 (1983) S. 237-239
• Verbindungstechnik von metallischen Gläsern, H. Kreye: Festschr. Fachb. Maschinenbau, Universität der Bundeswehr Hamburg 1983, S. 67-74
• Anwendung eines Magnetkollimators zur Erhöhung der Nachweisempfindlichkeit bei der energiedispersiven Mikroanalyse im Rasterelektronenmikroskop, H.-H. Müller: DVM-Bericht Mikroskopie und Mikrobereichsanalyse in der Materialprüfung. Düsseldorf 1983, S. 59-63
• Particle Velocity in Hypersonic Flame Spraying of WC-Co, N. Wagner, K. Gnädig, H. Kreye, H. Kronewetter: Surface Technology 22 (1984) p. 61-71
• Herstellung von verschleißfesten WC-Co Schichten durch Hypersonic Flammspritzen, N. Wagner, H. Kreye, H. Kestel: Z. f. Werkstofftechnik 16 (1985) S. 55-60
• Über den Bindemechanismus beim Explosivschweißen, H. Kreye, M. Hammerschmidt, U. Granz, C.-P. Woidneck: Schweißen und Schneiden 37 (1985) S. 297-302
• Aufbau und thermische Stabilität von chemisch abgeschiedenen Nickel-Phosphor-Schichten, H. Kreye, H.-H. Müller, T. Petzel: Galvanotechnik 77 (1986) S. 561-567
• Abhängigkeit der Eigenspannungen von der Mikrostruktur in galvanisch abgeschiedenen Nickelschichten, H.-H. Müller, H. Kreye, in: Galvanoformung, E.G. Leuze Verlag, Saulgau 1986, S. 117-123 und Galvanotechnik 78 (1987) S. 1596-1601
• On the Weldability of Mechanically Alloyed Aluminium, H. Kreye, G. Reiners, M. Schubert, G.-E. Löhmer, in: Horizons of Powder Metallurgy, Vol. 2, W.A. Kaysser, W.J. Huppmann, Eds., Verlag Schmid GmbH, Freiburg 1986, p. 707-711
• Microstructure and Bond Strength of WC-Co Coatings Deposited by Hypersonic Flame Spraying (Jet Kote Process), H. Kreye, D. Fandrich, H.-H. Müller, G. Reiners, in: Advances in Thermal Spraying, Pergamon Press, New York 1986, p. 121-128
• Mikrostruktur und mechanische Eigenschaften von Aluminium-Kupfer Reibschweiß-verbindungen, H. Kreye, G. Reiners: Z. Metallkde 77 (1986) S. 708-713
• Werkstoffprüfung an dünnen Schichten – galvanisch abgeschiedene Schichten und thermische Spritzschichten, H.-H. Müller, H. Kreye, in: Werkstoffsprüfung ’86, Deutscher Verband für Materialprüfung, Berlin 1986, S. 201-213
• Metallurgical Aspects and Application of Friction Welding, H. Kreye, G. Reiners, in: Advances in Welding Science and Technology; S.A. David, Ed., ASM Intern. Publ., Metals Park Ohio 1986, p. 307-310
• Verbindung von Kupferkabeln mit Stahlteilen durch Reibschweißen, H. Kreye, G. Reiners: Metall 41 (1987) S. 400-402
• Über die Mikrostruktur und die Eigenschaften von galvanisch abgeschiedenen Nickelschichten, H.-H. Müller: Fortschritt Berichte Reihe 5 Nr. 115, VDI-Verlag Düsseldorf 1987, S. 1-123
• Werkstoffkundliche Aspekte beim Reibschweißen von Werkstoffkombinationen, H. Kreye, G. Reiners, in: Berichtsband 2. Sondertagung Abbrennstumpf- und Reibschweißen, Aachen 1987, S. 175-186
• Verschleißfeste Oberflächenschichten durch Hochgeschwindigkeits-Flammspritzen (Jet Kote Verfahren), H. Kreye, W. Volk, in: Berichtsband der Jahrestagung der Deutschen Gesellschaft für Galvano- und Oberflächentechnik, Konstanz 1987, S. 56-59
• Die Bedeutung der Abscheideparameter für die Mikrostruktur und die Eigenschaften von galvanischen Nickelschichten, H.-H. Müller, H. Kreye, in: Berichtsband der Jahrestagung der Deutschen Gesellschaft für Galvano- und Oberflächentechnik, Konstanz 1987, S. 39-42
• Gefüge und Eigenschaften von Kupfer-Stahl Reibschweißverbindungen, H. Kreye, G. Reiners: Schweißen und Schneiden 40 (1988) S. 32-36
• Mikrostruktur und mechanische Eigenschaften von Reibschweißverbindungen aus Aluminium und Stahl, G. Reiners, H. Kreye: Schweißen und Schneiden 40 (1988) S. 123-129
• Jet Kote Spraying with Different Fuel Gases, H. Kreye, P. Heinrich, G. Loewe, in: Proc. Intern. Symp. on Advanced Thermal Spraying Technology and Allied Coatings, Osaka Japan 1988, p. 73-78
• Mikrostruktur, Haftfestigkeit und elektrische Leitfähigkeit von galvanischen Silber- schichten auf Niob, G. Reiners, H. Kreye, C. Brauner, D. Renken, J. Susta, H. Mix: Galvanotechnik 79 (1988) S. 2862-2868
• Methoden zur Sicherung und Beurteilung des Korrosionsschutzes durch chemisch abgeschiedene Nickel-Phosphor-Schichten, H.-G. Schenzel, H. Kreye, in: Berichtsband der Jahrestagung der Deutschen Gesellschaft für Galvano- und Oberflächentechnik, Goslar 1988, S. 8-11
• Erhöhung der Korrosionsbeständigkeit von chemisch abgeschiedenen Nickel-Phosphor-Schichten, H.-G. Schenzel, H. Kreye, in: Stromlose Beschichtung von Metall, Kunststoff, Glas und Keramik. 10. Ulmer Gespräch, Eugen G. Leuze Verlag, Saulgau 1988, S. 113-117
• Erhöhung der Korrosionsbeständigkeit von chemisch abgeschiedenen Nickel-Phosphor-Schichten, H.-G. Schenzel, H. Kreye: Galvanotechnik 81 (1990) S. 1655-1658
• Das Reibschweißen – Werkstoffkundliche Besonderheiten, H. Kreye: Drahtwelt 74 (1988) H6, 20-23
• Friction Welding – Specific Materials and Applications, H. Kreye: Wireworld 39 (1988) H6, 24-27
• Kristallisation und Rekristallisation in Nickel-Phosphor-Schichten, H.-G. Schenzel, H. Kreye, in: Berichtsband der Jahrestagung der Deutschen Gesellschaft für Galvano- und Oberflächentechnik, Innsbruck 1989, S. 8-11
• Characteristics of Coatings Produced by High Velocity Flame Spraying, H. Kreye, in: Proc. 12th Intern. Thermal Spray Conf. ITSC, London 1989, P.24, 1-9
• Optimization and Control of the Spraying Conditions in the Jet Kote Process, H. Kreye, in: Proc. 2nd Intern. Thermal Spray Conference, American Society for Metals, Cincinnati USA 1989 p. 39-45
• How to Improve the Corrosion Resistance of Electroless Nickel-Phosphorus Coatings, H.-G. Schenzel, H. Kreye, in: Proc. SUR/FIN ’89, K 1-9, American Electroplaters and Surface Finishers Society, Cleveland USA 1989
• Improved Corrosion Resistance of Electroless Nickel-Phosphorus Coatings, H.-G. Schenzel, H. Kreye: Plating and Surface Finishing 77, 10 (1990) p. 50-54
• Hochgeschwindigkeits-Flammspritzen – Neue Beschichtungsverfahren für den Verschleiß- und Korrosionsschutz, H. Kreye, in: Oberflächentechnik (Proc. SURTEC ’89, Berlin), C. Hanser Verlag München 1989, S. 653-660
• Elektrolytisch abgeschiedene Nickel-Phosphor-Schichten – Aufbau und Eigenschaften, H. Kreye, H.-G. Schenzel, J.C. Puippe, J. Vanhumbeeck, G. Ide: Metalloberfläche 44 (1990) S. 63-66
• Mikrostruktur und Korrosionsverhalten von chemisch abgeschiedenen Nickel-Phosphor-Schichten, H.-G. Schenzel: Fortschritt-Berichte VDI, Reihe 5 Nr. 196, VDI-Verlag Düsseldorf 1990, S. 1-141
• Stand der Entwicklung und Perspektiven des Hochgeschwindigkeits-Flammspritzen, H. Kreye, P. Heinrich: Schweißen und Schneiden 42 (1990) S. 382-385; Intern. Weld. Engineering 3 (1991) p. 16-19
• Galvanoformen im Mikrobereich – Untersuchung der Möglichkeiten und Grenzen am Beispiel der Herstellung von holografischen Prägematrizen, H. Kreye, T. Ahlhorn: Dünnschichttechnologien ’90, Bd. 1, VDI-Verlag Düsseldorf 1990, S. 405-411
• Verfahren zur Herstellung von holografischen Prägematrizen, T. Ahlhorn, H. Kreye, in: Jahrbuch Oberflächentechnik Bd. 47, Metall-Verlag Berlin 1991, S. 376-381
• Chemisch Nickel – Optimierung und Überwachung der Abscheidebedingungen, S. Frormann, H. Kreye, H.-G. Schenzel: Metalloberfläche 45 (1991) S. 157-161
• High Velocity Flame Spraying of Chromium Oxide and Aluminum Oxide, H. Kreye, U. Granz-Schnibbe: Thermal Spray Research and Applications, ASM International Ed., Materials Park Ohio USA, 1991, p. 575-580
• High Velocity Flame Spraying – Process and Coating Characteristics, H. Kreye: Proc. 2nd Plasma-Technik-Symposium, Luzern 1991, p. 39-47
• Möglichkeiten der Herstellung von Verschleißschutzschichten durch thermisches Spritzen, H. Kreye, R. Neiser: Oberflächentechnik und Tribologie, 13. Ulmer Gespräch, Eugen G. Leuze Verlag, Saulgau 1991, S. 42-49
• Möglichkeiten der Herstellung von Verschleißschutzschichten durch thermisches Spritzen, H. Kreye, R. Neiser:  Galvanotechnik 83 (1992) S. 2592-2599
• Wear and Corrosion Resistant Coatings by High Velocity Flame Spraying, H. Kreye, P. Heinrich, in: Proc. Eurocorr ’91, Budapest 1991, p. 495-500
• Widerstandsschweißen von metallischen Gläsern, F. Szigeti, H. Kreye: Schweißen und Schneiden 44 (1992) S. 13-17
• Galvanoformen im Mikrobereich, H. Kreye, T. Ahlhorn:  Dünnschichttechnologie ’92, VDI-Verlag Düsseldorf 1992, S. 345-353
• High Velocity Oxy-Fuel Flame Spraying of Molybdenum, H. Kreye, D. Blume:  Thermal Spraying – International Advances in Coating Technology, ASM International, Materials Park USA, 1992, p. 177-180
• Galvanoformen im Mikrobereich – Untersuchung der Möglichkeiten und Grenzen am Beispiel der Herstellung von holografischen Prägematrizen, H. Kreye, T. Ahlhorn:  BMFT-Verbundprojekt 13 N 5537, Abschlußbericht
• Microstructure and Properties of Electroless Nickel Coatings with Phosphorus Contents from 2 to 12 Percent, H. Kreye:  Proc. Intern. Congr. for Surface Finishing, Sao Paulo Brasilien 1992, Vol. 1, p. 146-155
• Zur elektrolytischen Abscheidung auf feinstrukturierten Oberflächen, T. Ahlhorn, J. Lewisch, H. Kreye:  Galvanotechnik 83 (1992) S. 3712-3717
• Transferring Relief Holograms formed in Silver Halide Emulsions into Nickel Foils for Embossing, T. Ahlhorn, K. Gnädig, H. Kreye:  Proc. American Electroplaters and Surface Finishers Society SUR/FIN ’93, Anaheim 1993, p. 623-530
• Mikrostruktur und Verschleißbeständigkeit von Nickel-Phosphor-Schichten mit niedrigem Phosphorgehalt, H. Kreye, R. Gutmann:  Metalloberfläche 47 (1993) S. 378-391
• Herstellung von nanokristallinen Nickel-Phosphor-Legierungen durch außenstrom-lose Metallabscheidung, H. Kreye, F. Müller:  DFG-Vorhaben Kr 1109, Abschlußbericht, 1994
• Elektrolytische Abformung mikrostrukturierter Oberflächen, T. Ahlhorn: Fortschritt-Berichte VDI, Reihe 2 Nr. 312, VDI-Verlag Düsseldorf 1994, S. 1-96
• Proteção Contra Desgaste por Revistemento con Ligas Autofluxantes de NiCrBSi, H. Kreye, F. Szigeti, A. Buschinelli: Proc. XIX E.N.T.S. Ass. Bras. de Soldagem, Brasil 1993, 547-564, H. Kreye, F. Szigeti, A. Buschinelli: Revista Soldagem e Materiais, ABS Vol. 6,3, 1994
• Werkstoffkundliche Aspekte des Hochgeschwindigkeits-Flammspritzens, H. Kreye:  3. Kolloquium zum Hochgeschwindigkeits-Flammspritzen, Ingolstadt 1994, S. 1-8
• Struktur und Umwandlungsverhalten von nanokristallinen Nickel-Phosphor-Legierungen, H. Kreye, F. Müller, K. Lang, D. Isheim, T. Hentschel: Z. Metallkunde 86 (1995) S. 184-189
• Removal of Thermal Spray Coatings by High-Pressure Water Jets, H. Kreye, T. Ahlhorn, J. Niebergall, R. Schwetzke: Proc. Intern. Thermal Spray Conf. ITSC’95, High Temp. Soc. Japan, (1995) p. 127-131
• The Role of the Fuel Gas in the HVOF Process, H. Kreye, S. Zimmermann, P. Heinrich: Proc. Intern. Thermal Spray Conf. ITSC’95, High Temp. Soc. Japan, (1995) p. 393-398
• Elektrolytisch abgeschiedene Nickelschichten – Einfluß des Schwefelgehalts auf Härte und Duktilität, H. Kreye, K. Lang: Metalloberfläche 49 (1995) S. 584-587
• HVOF and Plasma Sprayed Molybdenum Coatings – Microstructure and Properties, S. Zimmermann, H. Kreye: Proc. 8th Natl. Thermal Spray Conf. NTSC ’95, ASM International USA, (1995) p. 297-301
• Beschichten und Fügen, H. Kreye: Technische Rundschau 46 (1995) S. 24-27
• Herstellung, Mikrostruktur und Eigenschaften von außenstromlos abgeschiedenen Nickel-Phosphor-Schichten mit nanokristallinem Aufbau, F. Müller: Fortschritt-Berichte VDI, Reihe 5 Nr. 427, VDI-Verlag Düsseldorf 1996, S. 1-135
• Zum Einfluß des Brenngases auf Mikrostruktur und Eigenschaften von HVOF-Schichten, H. Kreye, R. Schwetzke, S. Zimmermann, P. Heinrich, W. Krömmer: DVS-Bericht Düsseldorf, Bd. 175 (1996) S. 95-98
• Hochgeschwindigkeits-Flammspritzen von Molybdän, S. Zimmermann, H. Kreye: DVS-Bericht Düsseldorf, Bd. 175 (1996) S. 336-340
• Hochgeschwindigkeits-Flammspritzen von Molybdän, S. Zimmermann, H. Kreye: Schweißen und Schneiden 48 (1996) S. 108-115
• Hochgeschwindigkeits-Flammspritzen von Molybdänschichten, H. Kreye: AIF-Vorhaben Nr. 9317, Abschlußbericht 1996
• Chromium Carbide Coatings Produced with Various HVOF Spray Systems, S. Zimmermann, H. Kreye, in: Proc. 9th Natl. Thermal Spray Conf. NTSC ’96, ASM International USA, (1996) p. 147-152
• Cavitation Erosion of HVOF Coatings, R. Schwetzke, H. Kreye, in: Proc. 9th Natl. Thermal Spray Conf. NTSC ’96, ASM International USA, (1996) p. 153-158
• High Velocity Oxy-Fuel Flame Spraying – Process and Coating Characteristics, H. Kreye, R. Schwetzke, S. Zimmermann, in: Proc. 9th Natl. Thermal Spray Conf. NTSC ’96, ASM International USA, (1996) p. 451-456
• Hochgeschwindigkeits-Flammspritzen von Molybdän, S. Zimmermann: Fortschritt-Berichte VDI, Reihe 5 Nr. 488, VDI-Verlag Düsseldorf 1997, S. 1-127
• Hochgeschwindigkeits-Flammspritzen als Alternative zum Hartverchromen, H. Kreye, R. Schwetzke: Berichte DGO-Jahrestagung 1997, S. 45-47
• Schweißen und Löten von elektrolytisch abgeschiedenem Nickel, H. Kreye, P. Hansen, R. Schwetzke, U. Wagener: Berichte DGO-Jahrestagung 1997, S. 75-77
• Vergleich der HVOF-Systeme – Werkstoffverhalten und Schichteigenschaften, A Comparison of HVOF Systems – Behaviour of Materials and Coating Properties, H. Kreye: Proc. 4. Kolloquium zum Hochgeschwindigkeits-Flammspritzen, GTS 1997, S. 13-21
• Hochgeschwindigkeits-Flammspritzen ermöglicht neue Anwendungen, H. Kreye: JOT Journal für Oberflächentechnik, April 1998, S. 102-108
• A Comparison of HVOF Systems – Behavior of Materials and Coating Properties, H. Kreye: Galvanotechnik 89 (1998) S. 3006-3013
• Vergleich der Hochgeschwindigkeits-Flammspritz-Systeme im Hinblick auf Werkstoffverhalten und Schichteigenschaften, H. Kreye: DVS Jahrbuch Schweißtechnik ’99, S. 177-186
• Möglichkeiten zur Beurteilung und Optimierung von Schichteigenschaften, Techniques for the Evaluation and Optimization of Coating Properties, R. Schwetzke, W. Krömmer: Proc. 4. Kolloquium zum Hochgeschwindigkeits-Flammspritzen, GTS 1997, S. 22-33
• Möglichkeiten zur Beurteilung und Optimierung von Schichteigenschaften, R. Schwetzke, W. Krömmer: Galvanotechnik 90 (1999) S. 778-788
• Microstructure and Properties of Tungsten Carbide Coatings Sprayed with Various HVOF-Spray Systems, R. Schwetzke, H. Kreye, in: Thermal Spray – Meeting the Challenges of the 21st Century, C. Coddet, Ed., ASM International, Materials Park, OH, 1998, p. 187-192
• Microstructure and Properties of Tungsten Carbide Coatings Sprayed with Various HVOF-Spray Systems, R. Schwetzke, H. Kreye: Journal of Thermal Spray Technology Vol. 8(3) (1999) p. 433-439
• Cavitation Erosion Resistant Coatings produced by Thermal Spraying and by Weld Cladding, H. Kreye, R. Schwetzke, A. Buschinelli, L. Boccanera, in: Thermal Spray – Meeting the Challenges of the 21st Century, C. Coddet, Ed., ASM International, Materials Park, OH, 1998, p. 269-273
• Properties and Characterization of Thermal Spray Coatings, G. Reiners, H. Kreye, R. Schwetzke, in: Thermal Spray – Meeting the Challenges of the 21st Century, C. Coddet, Ed., ASM International, Materials Park, OH, 1998, p. 629-634
• Mikrostruktur und Eigenschaften von elektrolytisch abgeschiedenen Nickel-Wolfram-Schichten, F. Gärtner, B. Junk, H. Kreye: Galvanotechnik 90 (1999) S. 996-1000
• Neue Verfahren zur Herstellung funktioneller Schichten durch thermisches Spritzen, H. Kreye: Proc. Werkstoffwoche 19, Bd 9 Oberflächentechnik, Hrsg. H. Dimigen u. W. Paatsch, Wiley-VCH-Verlag, Weinheim 1999, S. 169-177
• Neue Entwicklungen beim thermischen Spritzen – Systeme, Spritzwerkstoffe und Anwendungen, H. Kreye, A. Kirsten, R. Schwetzke, in: Proc. of the United Thermal Spray Conference 1999, Düsseldorf, Hrsg. E. Lugscheider, P.A. Kammer, DVS-Verlag, Düsseldorf 1999, S. 90-94
• Processing and Properties of Intermetallic/Ceramic Composites with Interpenetrating Microstructure, T. Klassen, R. Günther, B. Dickau, F. Gärtner, A. Bartels, R. Bormann, H. Mecking: Journal of American Ceramic Soc., Vol 81,9 (1998) p. 2504-2506
• Mechanical Properties of Intermetallic/Ceramic Composites Prepared by High Energy Milling, R. Bohn, G. Fanta, R. Guenther, B. Dickau, T. Klassen, F. Gärtner, A. Bartels, R. Bormann: Proc. of the International Symposium on Metastable, Mechanical Alloyed and Nanocrystalline Materials, ISMANAM ’98 in Wollongong, Australia, A. Calka, D. Wexler, Eds., Materials Science Forum, Vol. 312 (1999) p. 575-580
• Thermisch gespritzte Verschleißschutzschichten, A. Kirsten, H. Kreye, R. Schwetzke: Freiberger Forschungsforum ’99 in Freiberg, Juni 1999, Freiberger Forschungshefte B 297, S. 103-110
• Hochgeschwindigkeits-Flammspritzen von wolframcarbidhaltigen Hartmetallschichten, R. Schwetzke, H. Kreye: Schweißen und Schneiden 52 (2000) S. 70-79
• High Velocity Oxy-Fuel Spraying of Tungsten Carbide-based Coatings, R. Schwetzke, H. Kreye: Welding and Cutting 52 (2000) E 29 – E 34
• Nanocrystalline Composites for Thermal Spray Applications, F. Gärtner, R. Bormann, T. Klassen, H. Kreye, N. Mitra: Proc. of the International Conference on Metastable, Mechanical Alloyed and Nanocrystalline Materials, ISMANAM ’99 in Dresden, Germany, J. Eckert, H. Schlörb, L. Schultz, Eds., Materials Science Forum, Vols. 343-346 (2000) p. 933-940
• Cold Spraying – A Study of Process and Coating Characteristics, H. Kreye, T. Stoltenhoff, in: Thermal Spray – Surface Engineering via Applied Research, C.C. Berndt, Ed., ASM International, Materials Park, OH, 2000, p. 419-422
• Oxidation of Stainless Steel in the High Velocity Oxy-Fuel Process, K. Dobler, H. Kreye, R. Schwetzke: Journal of Thermal Spray Technology, Vol 9(3) (2000) p. 407-413
• The Effect of Oxidation on Microstructure and Properties of TiC-based Cermet Coatings, F. Gärtner, H. Kreye, V. Borck, W. Krömmer, in: Thermal Spray – Surface Engineering via Applied Research, C.C. Berndt, Ed., ASM International, Materials Park, OH, 2000, p. 463-469
• Nanocrystalline Ni – 3,6 at{3728c0ddcf5026c65bc0b4e995c837d09025c3e7fa253cea254631dfe46bf841} P and its Transformation Sequence Studied by Atom-Probe Field-Ion Microscopy, Th. Hentschel, D. Isheim, R. Kirchheim, F. Müller, H. Kreye: Acta mater. 48 (2000) p. 933-941
• Titanium Carbide Based Cermets for Thermal Spray Application, F. Gärtner, H. Kreye, R. Bormann, T. Klassen, in: Proc. Intern. Congr. on Advanced Materials and Processes, Euromat ’99 München, Vol 11, Wiley-VCH Weinheim, (2000) p. 88-93
• Preparation and Properties of Novel Nb- and Ti-based Metal Reinforces Alumina Composites with Interpenetrating Microstructure, R. Günther, R. Klassen, B. Dickau, F. Gärtner, A. Bartels, R. Bormann, in: Proc. Intern. Congr. on Advanced Materials and Processes, Euromat ’99 München, Vol 12, Wiley-VCH Weinheim (2000) p. 213-218
• Potential Applications for Nanocrystalline Materials, T. Klassen, R. Bohn, G. Fanta, W. Oelerich, R. Günther, N. Eigen, E. Aust, R. Bor­mann, F. Gärtner, H. Kreye: Materials Week 2000-Proceedings, Werkstoffwoche-Partnerschaft Frankfurt 2000, URL: www.materialsweek.org/proceedings
• Hochgeschwindigkeits-Flammspritzen – Stand der Technik, Perspektiven und Alter­nativen, High Velocity Oxy-Fuel Flame Spraying – State of the Art, Prospects and Alternati­ves, H. Kreye, F. Gärtner, A. Kirsten, R. Schwetzke, in: Proc. 5. Kolloquium Hoch­geschwindigkeits-Flammspritzen, Erding 2000, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany,(2000), S. 5-19
• Kaltgasspritzen – vom thermischen Spritzen zum kinetischen Spritzen, Cold Spraying – from Thermal Spraying to High Kinetic Energy Spraying, T. Stoltenhoff, H. Kreye, W. Krömmer, H.J. Richter, in: Proc. 5. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2000, Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany, (2000), S. 29-38
• Optimization of the Cold Spray Process, T.Stoltenhoff, H. Kreye, H.J. Richter, H. Assadi, in: Thermal Spray 2001 – New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, E.F. Lugscheider, Ed., ASM International, Materials Park, OH, 2001, p. 409-416
• High Velocity Combustion Wire Spraying ? Systems and Coatings, H. Kreye, A. Kirsten, F. Gärtner, X. Qi, in: Thermal Spray 2001 – New Surfaces for a New Millennium, C.C. Berndt, K.A. Khor, E.F. Lugscheider, Ed., ASM International, Materials Park, OH, 2001, p. 461-466
• Mikrostruktur und Eigenschaften von thermisch gespritzten Aluminiumoxidschichten, J.-H. Müller, H. Kreye: Schweißen & Schneiden 53 (2001) S. 336-345
• Microstructure and Properties of Thermally Sprayed Alumina Coatings, J.-H. Müller, H. Kreye: Welding & Cutting 53 (2001) E. 122-126
• Advanced Alumina Composites Reinforced with Titanium Alloys, T. Klassen, B. Dickau, F. Gärtner, A. Bartels, R. Bormann: J. American Ceramic Soc. 84 (2001) 1509-1513
• Deformation Microstructure of Cold Sprayed Coatings Studied by Electron Microscopy, C. Borchers, T. Stoltenhoff, F. Gärtner, H. Kreye, H. Assadi: Mat. Res. Soc. Symp. Proc. 673 (2001) P7.10
• Microstructures and Properties of Nanocrystalline Composite Coatings, F. Gärtner, C. Borchers, H. Kreye, N. Eigen, T. Klassen, R. Bormann, W. Krömmer, V. Borck, in: Proc. International Thermal Spray Conference ITSC 2002, E.F. Lugscheider, C.C. Berndt, Ed., DVS-Verlag, Düsseldorf, 2002, p. 102-106
• Cold Spraying ? State of the Art and Applicability, T. Stoltenhoff, J. Voyer, H. Kreye, in: Proc. International Thermal Spray Conference ITSC 2002, E.F. Lugscheider, C.C. Berndt, Ed., DVS-Verlag, Düsseldorf, 2002, p. 366-374
• Corrosion Behaviour of High Velocity Combustion Wire Sprayed Coatings, M.F.O. Schiefler, J. Voyer, F. Gärtner, X. Qi, in: Proc. International Thermal Spray Conference ITSC 2002, E.F. Lugscheider, C.C. Berndt, Ed., DVS-Verlag, Düsseldorf, 2002, p. 553-558
• Kaltgasspritzen ? ein Spritzverfahren für oxidarme metallische Schichten und Strukturen, T. Stoltenhoff, H. Kreye, in: Tagungsband Große Schweißtechnische Tagung, Kassel, 2002, S. 73-79
• An Analysis of the Cold Spray Process and its Coatings,T. Stoltenhoff, H. Kreye, H.J. Richter: Journal of Thermal Spray Technology, Vol. 11 (4), (2002), p. 542-550
• Electrochemical and Microstructural Investigation of Thermal Spray Coatings for the Steel Protection against Marine Corrosion, M.F.O. Schiefler, A.J.A. Buschinelli, F. Gärtner, J. Voyer, H. Kreye, 22^nd Congresso Brasileiro de Corros?o Promo??o: Abraco (22^nd CONBRASCORR), 19 ? 21 August 2002, Salvador, Brasil, article 060 on CD
• Advanced Alumina Composites Reinforced with Nb-Alloys, R. Günther, T. Klassen, B. Dickau, F. Gärtner, A. Bartels, R. Bormann: Adv. Eng. Mat. 4 (2002), 121-125
• Thermal Stability of Nanocrystalline Nickel-18 at.{3728c0ddcf5026c65bc0b4e995c837d09025c3e7fa253cea254631dfe46bf841} Tungsten Alloy Investigated with the Tomographic Atom Probe, P. Choi, P.T. Al-Kassab, F. Gärtner, H. Kreye, R. Kirchheim: Materials Science and Engineering A ? Structural Materials, Properties, Microstructure and Processing 353, (2003), p. 74-79
• Influencia de Par?metros de Processo na Qualidade de Revestimentos de Aco X46Cr13 Aspergidos Termicamente, M.F.O. Schiefler, A.J.A. Buschinelli, F. Gärtner, A. Kirsten, J. Voyer, H. Kreye, Congresso Brasileiro de Engenharia de Fabricacao, 2nd COBEF, 18-21 May 2003, Uberlandia, Brasil, article COF03_0546, on CD
• Protection of Steel Components Against Marine Corrosion by Thermally Sprayed Anodic Coatings, M.F.O. Schiefler, F. Gärtner, J. Voyer, A. Kirsten, H. Kreye, A.J.A. Buschinelli, in: Thermal Spray 2003 ? Advancing the Science and Applying the Technology. B.R. Marple, C. Moreau, Eds., ASM International, Materials Park, OH, 2003, p. 361-370
• Numerical and Microstructural Investigations of the Bonding Mechanisms in Cold Spraying, F. Gärtner, C. Borchers, T. Stoltenhoff, H. Kreye, H. Assadi, in: Thermal Spray 2003 ? Advancing the Science and Applying the Technology. B.R. Marple, C. Moreau, Eds., ASM International, Materials Park, OH, 2003, p. 1-8
• High Strain Rate Deformation Phenomena in Explosive Powder Compaction and Cold Gas Spraying, T. Schmidt, F. Gärtner, H. Kreye, in: Thermal Spray 2003 ? Advancing the Science and Applying the Technology. B.R. Marple, C. Moreau, Eds., ASM International, Materials Park, OH, 2003, p. 9-18
• Development of Cold Gas Sprayed Coatings, J. Voyer, T. Stoltenhoff, H. Kreye, in: Thermal Spray 2003 ? Advancing the Science and Applying the Technology. B.R. Marple, C. Moreau, Eds., ASM International, Materials Park, OH, 2003, p. 71-78
• Tailoring Nanocrystalline Materials Towards Potential Applications, T. Klassen, R. Bohn, G. Fanta, W. Oelerich, N. Eigen, E. Aust, R. Bormann, F. Gärtner, H. Kreye: Z. Metallkd. 94 (2003), p. 610-614
• Microstructural and Macroscopic Properties of Cold Sprayed Copper Coatings, C. Borchers, F. Gärtner, T. Stoltenhoff, H. Assadi, H Kreye: Journal of Applied Physics, Bd. 93 (2003), 12, p. 10064-10070
• Bonding Mechanism in Cold Gas Spraying, H. Assadi, F. Gärtner, T. Stoltenhoff, H. Kreye: Acta Materialia, 51(2003), p. 4379-4394
• Determination of Cracking Resistance of Thermal Spray Coatings During 4-Point Bend Testing Using an Acoustic Emission Technique, J. Voyer, H. Kreye: Journal of Thermal Spray Technology, Vol. 12 (3), (2003), p. 416-426
• Hochgeschwindigkeits-Flammspritzen ? Stand der Technik, neue Entwicklungen und Alternativen, High Velocity Oxy-Fuel Flame Spraying ? State of the Art, new Developments and Alternatives, H. Kreye, F. Gärtner, H.J. Richter, in: Proc. 6. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2003, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany 2003, S. 5-17
• Methode und Einsatzpotenzial des Kaltgasspritzens, Method and Potential of the Cold Spray Process, J. Voyer, T. Stoltenhoff, T. Schmidt, H. Kreye, in: Proc. 6. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2003, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany 2003, S. 39-47
• Einsatz analytischer Verfahren zum Verständnis und zur Optimierung des Kaltgasspritzens, Application of Analytical Methods for Understanding and Optimization of the Cold Spray Process, H. Assadi, F. Gärtner, T. Stoltenhoff, H. Kreye, in: Proc. 6. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2003, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany 2003, S. 49-59
• Neue Herausforderungen für das Draht- und Stabflammspritzen, New Challenges for Wire and Rod Flame Spraying, F. Gärtner, J. Voyer, Xiumei Qi, H. Kreye, H.J. Richter, W. Krömmer, in: Proc. 6. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2003, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany 2003, S. 61-71
• Kaltgasspritzen ? Ein neues Beschichtungsverfahren zur Herstellung oxidarmer metallischer Schichten, H. Kreye, T. Schmidt, T. Stoltenhoff: Tagungsband 41. Jahrestagung der DGO, Bremen, September 2003, S. 160-163
• Production of Nanocrystalline Cermet Thermal Spray Powders for Wear Resistant Coatings by High-Energy Milling, N. Eigen, T. Klassen, E. Aust, R. Bormann, F. Gärtner, H. Kreye: Materials Science and Engineering A, Bd. 356 (2003), 1-2, p. 114-121
• Kaltgasspritzen an der Universität der Bundeswehr Hamburg, H. Kreye: GTS Strahl, Sonderheft zum 6. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding, November 2003
• Wear Behavior of Spray Coatings Based on Nanocrystalline Cermet Powders, T. Klassen, N. Eigen, X. Qi, F. Gärtner, E. Aust, R. Bormann, H. Kreye: Surface Engineering in Materials Science II, TMS Annual Meeting, March 2 – 6, 2003, San Diego, California, USA, eds. S. Seal, N.B. Dahotre, J. Moore, C. Suryanaryana, A. Agarwal, The Surface Engineering Committee of the MPMD of TMS, TSM Warrendale, Pennsylvania, USA, 99 ? 110
• Kaltgasspritzen von Kupfer ? Eine strömungsmechanische und werkstoffkundliche Analyse und Optimierung des Spritzprozesses, T. Stoltenhoff: Dissertation Oktober 2003, Hamburg, Shaker Verlag 2004, Aachen. ISBN 3-8322-2302-9
• Kaltgasspritzen zur Herstellung oxidarmer metallischer Schichten, H. Kreye, T. Stoltenhoff: der praktiker 2/2004, S. 42-46
• Microstructural bonding features of cold sprayed face centered cubic metals, C. Borchers, F. Gärtner, T. Stoltenhoff, H. Kreye:Journal of Applied Physics, Vol. 96 (2004), No. 8, p. 4288-4292
• Abrasive wear mechanisms of VPS- and HVOF-sprayed TiC-Ni-based nanocrystalline coatings, X. Qi, E. Aust, N. Eigen, F. Gärtner, R. Bormann: Proc. DGM Conf. Reibung und Verschleiß, Fürth, Germany, March 10 ? 12, 2004, Materialwissenschaft und Werkstofftechnik 35 (2004), S. 779-784
• Recent Developments in High Velocity Oxy-Fuel Flame Spraying, H. Kreye, F. Gärtner: Proc. 1^st Tsukuba International (Japanese-German) Coatings Symposium: Recent Trends in Coatings Technology to Challenge Harsh Environments and to Open New Applications, Tsukuba, Japan, May 17?18, 2004, (ed. S. Kuroda), National Institute for Materials Science, Tsukuba, Japan, (2004), p. 4-5
• Process Analysis and Bonding Mechanism of Cold Spraying, F. Gärtner, T. Schmidt, H. Assadi, T. Stoltenhoff, H. Kreye: Proc. 1^st Tsukuba International (Japanese-German) Coatings Symposium: Recent Trends in Coatings Technology to Challenge Harsh Environments and to Open New Applications, Tsukuba, Japan, May 17?18, 2004, (ed. S. Kuroda), National Institute for Materials Science, Tsukuba, Japan, (2004), S. 8-9
• High Strain Rate Deformation Phenomena in Cold Spraying and Explosive Powder Compaction, T. Schmidt, F. Gärtner, H. Kreye: Proc. 1^st Tsukuba International (Japanese-German) Coatings Symposium: Recent Trends in Coatings Technology to Challenge Harsh Environments and to Open New Applications, Tsukuba, Japan, May 17?18, 2004, (ed. S. Kuroda), National Institute for Materials Science, Tsukuba, Japan, (2004)
  p. 12 – 13.
• Microstructures and Properties of Nanocrystalline Thermal Spray Coating Using High-Energy Milled Cermet Powders, N. Eigen, T. Klassen, E. Aust, R. Bormann, F. Gärtner: Surface and Coatings Technology 195 (2005), p. 344-357
• Formation of persistent dislocation loops by ultra-high strain-rate deformation during cold spraying, C. Borchers, F. Gärtner, T. Stoltenhoff, H. Kreye: Acta Materialia 53, (2005), p. 2991-3000
• High Velocity Impact Phenomena and Coating Quality in Cold Spraying, T. Schmidt, F. Gärtner, H. Assadi, T. Stoltenhoff, H. Kreye: Proc. International Thermal Spray Conference ITSC 2005, May 2005, Basel, Switzerland, E.F. Lugscheider, Ed., DVS-Verlag, Düsseldorf, 2005, p. 232-238
• The Cold Spray Process and its Potential for Industrial Applications, F. Gärtner, T. Stoltenhoff, T. Schmidt, H. Kreye: Proc. International Thermal Spray Conference ITSC 2005, May 2005, Basel, Switzerland, E.F. Lugscheider, Ed., DVS-Verlag, Düsseldorf, 2005, p. 158-163
• Schichten und Strukturen durch Kaltgasspritzen, H. Kreye, F. Gärtner, T. Schmidt, T. Stoltenhoff, H.J. Richter, H. Assadi: Uniforschung (2005), S. 27-31
• Development of a Generalized Parameter Window for Cold Spray Deposition, T. Schmidt, F. Gärtner, H. Assadi, H. Kreye: Acta Materialia 54 (2006), p. 729-742
• Bonding Mechanisms and Applications of Cold Spraying, F. Gärtner, H. Assadi, H. Kreye, T. Schmidt, T. Stoltenhoff: Proc. SMT 18, 18^th International Conference on Surface Modification Technologies, Dijon, November 15th?17th 2004, France, in press
• Two-body Abrasive Wear of Nano- and Microcrystalline TiC-Ni-Based Thermal Spray Coatings, X. Qi, N. Eigen, E. Aust, F. Gärtner, T. Klassen, R. Bormann: submitted to Surface Coating Technology, November 2004, in press
• Microstructures and Key Properties of Cold-sprayed and Thermally Sprayed Copper Coatings, T. Stoltenhoff, C. Borchers, F. Gärtner, H. Kreye: submitted to Surface Coating Technology, November 2004, in press
• Influence of impact velocity on the extent of bonded interfaces in cold gas spraying, H. Assadi, F. Gärtner 2*, C. Borchers, T. Stoltenhoff, H. Kreye: in preparation.
• Mechanical Properties of Cold Sprayed and Thermally Sprayed Copper Coatings, F. Gärtner, T. Stoltenhoff, J. Voyer, H. Kreye, S. Riekehr, M. Koçak, submitted to Surface and Coatings Technology, August 2005.
• Comparison of Wear Mechanisms of Nano- and Microcrystalline Composite Coatings, X. Qi, E. Aust, N. Eigen, T. Klassen, R. Bormann, F. Gärtner, submitted to Advanced Engineering Materials, September 2005
• Recent Developments and Potential Applications of Cold Spraying, F. Gärtner, R. Schmidt, T. Stoltenhoff, H. Kreye: submitted to Advanced Engineering Materials, November 2005
• New Developments in Cold Spray Based on Higher Gas- and Particle Temperatures, T. Schmidt, F. Gärtner, H. Kreye: submitted for Proc. International Thermal Spray Conference 2006
• The Cold Spray Process and its Optimization, H. Kreye, T. Schmidt, F. Gärtner, T. Stoltenhoff: submitted for Proc. International Thermal Spray Conference 2006
• Advances in Cold Spraying, F. Gärtner, invited guest editorial for Surface Engineering, November 2005
• Impact Conditions and Bonding in Cold Spraying, T. Schmidt, F. Gärtner, H. Assadi, H. Kreye: submitted to J. Thermal Spray Technology, December 2005
• The Cold Spray Process and its Potential for Industrial Applications, F. Gärtner, T. Stoltenhoff, T. Schmidt, H. Kreye: submitted to J. Thermal Spray Technology, December 2005

Dr.–Ing. Tobias Schmidt

• High Strain Rate Deformation Phenomena in Explosive Powder Compaction and Cold Gas Spraying, T. Schmidt, F. Gärtner, H. Kreye, Proc. ?International Thermal Spray Conference 2003?: Advancing the Science and Applying the Technology, May 5 – 8, 2003, Orlando, Florida USA, eds. B.R. Marple and C. Moreau, ASM International 2003, 9 – 18.
• Kaltgasspritzen / Ein neues Beschichtungsverfahren zur Herstellung oxidarmer metallischer Schichten, H. Kreye, T. Schmidt, T. Stoltenhoff: Tagungsband 41. Jahrestagung der DGO, Bremen, September 2003, S. 160-163
• Methode und Einsatzpotenzial des Kaltgasspritzens / Method and Potential of the Cold Spray Process, J. Voyer, T. Stoltenhoff, T. Schmidt, H. Kreye, in: Proc. 6. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2003, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany 2003, S. 39-47
• Process Analysis and Bonding Mechanism of Cold Spraying, F. Gärtner, T. Schmidt, H. Assadi, T. Stoltenhoff, H. Kreye, Proc. 1^st Tsukuba International (Japanese-German) Coatings Symposium: Recent Trends in Coatings Technology to Challenge Harsh Environments and to Open New Applications, Tsukuba, Japan, May 17 – 18, 2004, (ed. S. Kuroda), National Institute for Materials Science, Tsukuba, Japan, (2004) 8 – 9.
• High Strain Rate Deformation Phenomena in Cold Spraying and Explosive Powder Compaction, T. Schmidt, F. Gärtner, H. Kreye, Proc. 1^st Tsukuba International (Japanese-German) Coatings Symposium: Recent Trends in Coatings Technology to Challenge Harsh Environments and to Open New Applications, Tsukuba, Japan, May 17 ? 18, 2004, (ed. S. Kuroda), National Institute for Materials Science, Tsukuba, Japan, (2004) 12 – 13.
• High Velocity Impact Phenomena and Coating Quality in Cold Spraying, T. Schmidt, F. Gärtner, H. Assadi, T. Stoltenhoff, H. Kreye, Proc. ?International Thermal Spray Conference 2005?: Thermal Spray connects: Explore its surfacing potential, May 2 – 4, 2005, Basel, Switzerland, ed. E. Lugscheider, DVS-Verlag, Düsseldorf, Germany, 2005, 232 – 238.
• The Cold Spray Process and its Potential for Industrial Applications, Frank Gärtner, Thorsten Stoltenhoff, Tobias Schmidt, Heinrich Kreye,Proc. ´International Thermal Spray Conference 2005´: Thermal Spray connects: Explore its surfacing potential, May 2 – 4, 2005, Basel, Switzerland, ed. E. Lugscheider, DVS-Verlag, Düsseldorf, Germany, 2005, 158 – 163. Extended version as invited paper in: Journal Thermal Spray Technology 15 (2006), 185-163
• Schichten und Strukturen durch Kaltgasspritzen, H. Kreye, F. Gärtner, T. Schmidt, T. Stoltenhoff, H.J. Richter, and H. Assadi, Uniforschung Forschungsmagazin der Helmut-Schmidt-Universität / Universität der Bundeswehr Hamburg, ISSN 0940-8061, 15 (2005) 27 – 31.
• Development of a Generalized Parameter Window for Cold Spray Deposition, T. Schmidt, F. Gärtner, H. Assadi, H. Kreye, Acta Materialia 54 (2006) 729 – 742
• New Developments in Cold Spray Based on Higher Gas- and Particle Temperatures, T. Schmidt, F. Gärtner, H. Kreye, „Thermal Spray 2006: Science, Innovation and Application“ , Eds. B.R.Marple, C.Moreau, ASM International, Materials Park, OH, USA, 2006, ISBN 0-87170-809-4, on CD, article no.:s2_1-12003. Modified version as invited paper in Journal of Thermal Spray Technology, Volume 15, Number 4, December 2006, pp. 488-494(7), DOI: 10.1361/105996306X147144
• The Cold Spray Process and its Optimization, H. Kreye, T. Schmidt, F. Gärtner, T. Stoltenhoff, „Thermal Spray 2006: Science, Innovation and Application“ , Eds. B.R.Marple, C.Moreau, ASM International, Materials Park, OH, USA, 2006, ISBN 0-87170-809-4, on CD, article no.:s2_1-12011
• Bonding Mechanisms and Applications of Cold Spraying, F. Gärtner, H. Assadi, H. Kreye, T. Schmidt, T. Stoltenhoff, Proc. SMT 18, Dijon, November 15th – 17th 2004, „Surface Modification Technologies XVIII“, Eds. T. S. Sudarshan, M. Jeandin, J.J. Stiglich, Maney Publishing, London, UK, 2006, 35-43
• Recent Developments and Potential Applications of Cold Spraying, F. Gärtner, T. Schmidt, T. Stoltenhoff and H. Kreye, Advanced Engineering Materials 7 (2006) 611-618
• Present Status and Future Prospects of Cold Spraying, F. Gärtner, T. Schmidt, H. Kreye, Proc. Powder Metallurgy World Congress 2006 (PM2006), accepted for publication in Materials Science Forum, 2006.
• Characteristics of Particle Bonding and Material Deposition in Cold Spraying, H. Assadi, T. Schmidt, F. Gärtner, H. Kreye, submitted for Proc. Conference of Metallurgists, COM 2006, Montreal.
• Mikrostruktur und Eigenschaften von Kaltgas-Spritzschichten / Microstructure and Properties of Cold Sprayed Coatings, T. Schmidt, F. Gärtner, H. Kreye, T. Klassen, Proc. 7. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2006, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany 2006.
• Vom Thermischen Spritzen zum kinetischen Spritzen / From Thermal Spraying to Kinetic Spraying, H. Kreye, T. Schmidt, F. Gärtner, Proc. 7. Kolloquium Hochgeschwindigkeits-Flammspritzen, Erding 2006, (ed. P. Heinrich) Gemeinschaft Thermisches Spritzen e.V., Unterschleißheim, Germany 2006
• Kaltgasspritzen / Eine Analyse des Materialverhaltens beim Partikelaufprall und die daraus abgeleitete Prozessoptimierung, T. Schmidt, Doktorarbeit an der Fakultät Maschinenbau der Helmut-Schmidt-Universität / Universität der Bundeswehr Hamburg, Hamburg 2007, Shaker Verlag, ISBN 978-3-8322-6399-7

allgemeine Veröffentlichungen

1. In-situ densification of Ti coatings by the Warm Spray (two-stage HVOF) process, J. Kawakita, S. Kuroda, S. Krebs, H. Katanoda: Materials Transactions 47, 2006, p. 1631-1637
2. Thermoelectric Device Fabricated by Plasma Spray, S. Sodeoka, M. Suzuki, T. Inoue, J. Rückriem, in: Proceedings of the ITSC 2007, „Thermal Spray 2007: Global Coating Solutions“, (Eds.) B.R. Marple, M. M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima and G. Montavon, Published by ASM International, Materials Park, Ohio, USA, 2007, on CD, ISBN 0-87170-809, p. 3313 – 318.
3. New structure of APS sprayed AI₂O₃ coatings investigated by Cu-electroplating, M. Adachi, T. Takabatake, A. Ohmori, Akashi/J, and M. Kremer, Hamburg/D: Proc. Thermal Spray Crossing Borders, E. Lugscheider, ED., DVS-Verlag GmbH, Düsseldorf, Germany, ISBN 978-3-8715-979-2, 2008, on CD, p. 1021-1024